4,500 Sets of 120W LED Roadway Lights for an Urban Road Lighting Upgrade in Athens, Greece

4,500 Sets of 120W LED Roadway Lights for an Urban Road Lighting Upgrade in Athens, Greece

An urban roadway lighting upgrade project in Athens, Greece, involved the replacement and modernization of roadway lighting equipment across the project area.

For this project, LIKELITE supplied 4,500 sets of 120W LED Roadway Lights with CE, RoHS 2.0 and ErP compliance requirements. The project specification included IP66 protection, 10KV surge protection, CREE SMD3030 LED technology and a stated luminous efficiency of 150 lm/W.

In addition to product supply, the project scope included onsite metering, roadway lighting and circuitry design, lighting simulation and CAD layout support, as well as project installation support.

The project specification reported an estimated 22% energy-saving improvement following the lighting upgrade.

Project Information

Project Scope

The Athens project was structured as a roadway lighting modernization project rather than a standard catalogue-product purchase.

The project scope covered:

• 4,500 sets of 120W LED Roadway Lights

• Lighting and circuitry design

• Onsite metering

• DIALux Evo layout

• LitePro DLX layout

• AutoCAD layout

• AGi32 layout

• Lighting design coordination

• Project installation support

The engineering work was intended to coordinate the lighting equipment with actual roadway conditions, existing infrastructure and project installation requirements.

Roadway Lighting Equipment

The selected luminaire uses a 120W LED configuration with CREE SMD3030 LED light sources.

The specified luminous efficiency is 150 lm/W, providing a nominal light output of approximately 18,000 lumens per 120W luminaire before considering system-level optical and application factors.

The luminaire uses an aluminum-alloy housing with ALU+PC material construction.

The principal equipment configuration includes:

• Rated Power: 120W

• Input Voltage: 220–240V AC

• LED: CREE SMD3030

• Luminous Efficiency: 150 lm/W

• Beam Angle: 120°

• CCT: 5000K ±300K

• CRI: Ra 80

• IP Rating: IP66

• Surge Protection: 10KV

• Voltage Resistance: 1.5KV

• Housing: Aluminum alloy

• Material: ALU + PC

• Frequency: 50Hz

• Rated Lifespan: 30,000 hours

• Operating Temperature: -20°C to +45°C

Engineering Design and Lighting Calculation

For an urban roadway upgrade, the lighting layout must be coordinated with the actual road geometry, pole arrangement and existing electrical infrastructure.

LIKELITE's project engineering service included several design and calculation formats.

Onsite Metering

Existing roadway conditions can be measured before the final lighting layout is confirmed. This provides project-specific information for subsequent design work.

DIALux Evo

DIALux Evo can be used to develop the roadway lighting layout and evaluate illumination performance according to the project's specified criteria.

LitePro DLX

LitePro DLX layout support was included as part of the available engineering workflow.

AutoCAD

CAD drawings provide a practical format for coordinating pole positions, roadway geometry, luminaire locations and installation information.

AGi32

AGi32 can be used for additional lighting calculation and design coordination where required by the project team.

The purpose of the design work is to establish a project-specific lighting layout rather than simply selecting a wattage from a product catalogue.

Energy-Saving Result

The project specification reports a 22% energy-saving improvement after the roadway lighting upgrade.

The stated saving is associated with the transition to the specified LED roadway lighting system and the project lighting design.

For formal project reporting, energy savings should be verified using actual electricity consumption before and after installation, taking into account operating hours, dimming schedules and other system conditions.

The project equipment configuration included:

• 120W rated power

• 150 lm/W stated luminous efficiency

• IP66 protection

• 10KV surge protection

• 5000K ±300K CCT

• CE / RoHS 2.0 / ErP requirements

• 2-year warranty

Compliance and Product Documentation

The project specification included CE, RoHS 2.0 and ErP requirements.

For European roadway lighting projects, product documentation forms an important part of the procurement and technical review process.

Project documentation can include:

• Product datasheet

• Technical specifications

• CE documentation

• RoHS documentation

• ErP-related documentation

• Electrical specifications

• Photometric information

• Installation instructions

• Warranty documentation

The final documentation package should correspond to the actual Products supplied to the project.

Installation Support

With 4,500 roadway luminaires involved, installation coordination is an important part of project execution.

The project installation scope can involve:

1. Existing pole inspection

2. Luminaire position confirmation

3. Electrical connection

4. Fixture installation

5. System commissioning

6. Lighting performance verification

LIKELITE's stated project service includes Project Installation support.

The actual installation procedure should follow the approved drawings, local electrical requirements and site safety procedures.

Designed for Long-Term Outdoor Roadway Use

The project luminaire was specified for outdoor roadway applications and included IP66 ingress protection.

The aluminum-alloy housing provides the structural body of the luminaire, while the specified operating range was -20°C to +45°C.

Additional electrical protection included 10KV surge protection and 1.5KV voltage resistance.

The stated lifespan was 30,000 hours.

Actual service life will depend on operating temperature, electrical conditions, installation environment, maintenance and other site-specific factors.

Project Logistics

The specified individual package dimensions were:

54 × 17 × 7 cm

The stated gross weight per packaged luminaire was:

8.75 kg

For a project quantity of 4,500 sets, logistics planning should take into account packaging volume, shipment configuration, delivery schedule and project installation sequence.

Before & After Comparison

DIALux EVO Lighting Simulation Verification

Project Summary

4,500 Sets
LED Roadway Lights supplied

120W
Rated power per luminaire

150 lm/W
Stated luminous efficiency

IP66
Ingress protection

10KV
Surge protection

5000K ±300K
Color temperature

22%
Stated energy-saving improvement

CE / RoHS 2.0 / ErP
Project compliance requirements

2 Years
Warranty

Project Delivery Process

01 — Project Data Collection

Roadway drawings, pole information, existing lighting conditions and technical requirements are collected.

02 — Site Measurement

Onsite metering and project condition assessment are carried out where required.

03 — Lighting Layout

Roadway lighting positions and equipment configuration are developed according to the project requirements.

04 — Lighting Calculation

DIALux Evo, LitePro DLX, AutoCAD or AGi32 formats can be used according to the project engineering workflow.

05 — Product Confirmation

Power, optical configuration, electrical parameters, protection rating and compliance requirements are confirmed.

06 — Production and Inspection

The 120W LED Roadway Lights are prepared according to the approved project specification.

07 — Delivery and Installation

The 4,500 sets are delivered and installation support is provided according to the project schedule.

08 — Commissioning

The installed system is checked against the approved project requirements before project completion.

Frequently Asked Questions

1. What type of project was completed in Athens?

It was an urban roadway lighting modernization and upgrade project.

2. How many LED Roadway Lights were supplied?

The project quantity was 4,500 sets.

3. What wattage was specified?

Each LED Roadway Light was specified at 120W.

4. What LED technology was used?

The project specification listed CREE SMD3030 LED.

5. What was the stated luminous efficiency?

The specified lamp luminous efficiency was 150 lm/W.

6. What was the input voltage?

The specified input voltage was 220–240V AC at 50Hz.

7. What protection rating did the roadway light have?

The luminaire was specified with IP66 protection.

8. What surge protection was included?

The project specification included 10KV surge protection.

9. What certifications were required?

The project specification listed CE, RoHS 2.0 and ErP requirements.

10. What color temperature was specified?

The specified color temperature was 5000K ±300K.

11. What energy-saving result was reported?

The project specification reported a 22% energy-saving improvement. Final savings should be verified against actual project consumption data.

12. Did LIKELITE provide lighting design services?

Yes. The stated service included onsite metering, DIALux Evo, LitePro DLX, AutoCAD and AGi32 layouts.

13. Was installation support included?

Yes. Project Installation was included in the stated project service scope.

14. What was the warranty period?

The project specification stated a 2-year warranty.

15. Can LIKELITE supply similar roadway lighting projects?

LIKELITE provides LED roadway lighting products and engineering-oriented project support for international roadway, municipal and infrastructure projects.

Related Project Categories

Roadway Lighting Projects
Urban roadway lighting upgrades and modernization projects.

Highway Lighting Projects
LED lighting projects for highways and major transportation corridors.

Municipal Lighting Projects
Large-scale municipal roadway lighting replacement programs.

Infrastructure Lighting Projects
Project lighting supply for EPC contractors, engineering companies and infrastructure procurement teams.

Start a Roadway Lighting Project

For a new roadway lighting project, send the available roadway drawings, pole spacing, existing lighting information, required lighting standards and project quantity to LIKELITE.

The project team can review the available technical information and provide the appropriate LED Roadway Lights configuration and engineering design support.

LIKELITE — Outdoor LED Lighting Project Solution Provider for International Engineering Projects