2,000 Sets of 80W LED Street Lights with Intelligent Lighting Control for Urban Road Modernization in the UAE
LIKELITE supplied LED Street Lights for an urban road smart lighting upgrade project in Abu Dhabi, United Arab Emirates. The project included 2,000 sets of 80W LED Street Lights, combined with microwave motion sensing, light control and timer control.
The project was structured around roadway lighting modernization, intelligent control, energy consumption reduction and reliable outdoor operation. LIKELITE supported the project with lighting and circuitry design, onsite metering, professional lighting layouts and project installation services.
Project Information
Project Item
Project Details
Project Location
Abu Dhabi, United Arab Emirates
Application
Urban Road Lighting
Project Type
Smart Lighting Upgrade Project
Product
LED Street Lights
Power
80W
Quantity
2,000 sets
Reported Energy-Saving Effect
27%
Smart Control
Microwave Motion Sensor + Light Control + Timer Control
Certification
ECAS / EESL / TDRA
Warranty
2 years
Brand
LIKELITE
Origin
Guangdong, China
Project Scope
The Abu Dhabi project focused on upgrading urban road lighting with LED street lights and intelligent lighting control.
The project scope included:
Supply of 2,000 sets of 80W LED Street Lights
Urban roadway lighting application
Microwave motion sensing
Light control
Timer control
Lighting and circuitry design
Onsite metering
DIALux Evo lighting layout
LitePro DLX lighting layout
AutoCAD layout
AGi32 layout
Project installation
Compliance documentation
Two-year warranty support
The project therefore combined LED roadway lighting equipment, smart control functions and engineering services rather than treating the lighting fixtures as an isolated product purchase.
LED Street Light Configuration
The project used 80W LED Street Lights configured for urban roadway applications.
Key product parameters included:
Power: 80W
Input Voltage: AC 220–240V
Frequency: 50Hz
Power Supply: AC
Luminous Efficiency: 150 lm/W
Light Source: Lumileds SMD2835 LED
Color Temperature: 5000K ±300K
Color Rendering Index: Ra 80
IP Rating: IP66
Surge Protection: 10KV
Voltage Resistance: 1.5KV
Housing Material: Aluminum Alloy
Lifespan: 30,000 hours
Working Temperature: -20°C to 55°C
Brand: LIKELITE
Smart Lighting Control System
The defining feature of this project is the combination of LED roadway lighting with intelligent control functions.
The specified smart control system includes:
Microwave Motion Sensor
Motion detection can be used to respond to changes in road activity and traffic conditions, subject to the final control configuration and project requirements.
Light Control
Light-control functionality can coordinate lighting operation with ambient light conditions, supporting automatic operation according to the project's lighting schedule.
Timer Control
Timer control provides scheduled lighting operation and can be coordinated with project operating requirements.
The three functions can be incorporated into the overall roadway lighting control strategy according to the actual project configuration.
The purpose of the control system is to provide greater operational control than a fixed-output lighting installation.
Smart Road Lighting Project Application
Urban road lighting requires consistent operation across different periods of the day and different traffic conditions.
For the Abu Dhabi project, the combination of:
80W LED Street Lights + Microwave Motion Sensor + Light Control + Timer Control
creates the core smart-lighting configuration.
The lighting system can be configured according to:
Road operating schedules
Traffic activity
Ambient light conditions
Lighting zones
Required lighting levels
Energy-management objectives
Existing electrical infrastructure
Control-system requirements
Actual control logic should be confirmed according to the approved project design and site conditions.
Lighting and Circuitry Design
LIKELITE provided lighting and circuitry design support for the project.
The engineering process can cover:
Luminaire positioning
Lighting layout
Circuit arrangement
Control-system coordination
Electrical requirements
Installation planning
Lighting calculation
This approach allows the lighting equipment and smart-control system to be considered as one project installation rather than separate procurement items.
Onsite Metering and Project Data
Onsite metering forms part of the listed project service scope.
Site measurements can provide information required for lighting design and project coordination, including:
Existing lighting conditions
Road layout
Existing pole positions
Mounting conditions
Electrical conditions
Lighting requirements
Existing roadway environment
The collected information can then be used for project-specific lighting calculations and layout development.
Professional Lighting Design
LIKELITE's project service scope includes multiple lighting design platforms:
DIALux Evo Layout
Used for roadway lighting layout and project-specific lighting calculations.
LitePro DLX Layout
Used for lighting design and layout development according to project requirements.
AutoCAD Layout
Used for engineering drawing coordination, luminaire positioning and installation planning.
AGi32 Layout
Used where AGi32-based lighting calculations or engineering coordination are required.
The appropriate software and design documentation should be selected according to the requirements of the EPC contractor, engineering company or project owner.
Energy-Saving Performance
The project information indicates an energy-saving improvement of 27%.
The reported result should be evaluated against the project's actual operating conditions and baseline lighting system.
Factors affecting the final energy-saving result include:
Existing luminaire power
Existing fixture quantity
Operating hours
Traffic conditions
Motion-sensor settings
Timer schedules
Light-control settings
Dimming or output-control strategy
Actual electricity consumption
Therefore, the 27% figure represents the reported project result and should not be treated as a universal saving rate for every smart roadway lighting project.
UAE Compliance and Certification
The project certification information includes:
ECAS
EESL
TDRA
These documents form part of the project's compliance and procurement documentation.
For future UAE projects, the applicable certification package should be confirmed against the specific product model, project requirements and current regulatory requirements before final procurement.
Outdoor Protection and Operating Conditions
The LED Street Lights supplied for the project are specified with IP66 protection and an operating temperature range of -20°C to 55°C.
The lamp body uses aluminum alloy construction.
The electrical configuration includes:
AC 220–240V input
50Hz frequency
10KV surge protection
1.5KV voltage resistance
These specifications form part of the project's outdoor roadway lighting equipment configuration.
Project Installation
LIKELITE's listed service scope includes project installation.
A typical project execution sequence can include:
1. Project Requirement Review
Review the road application, existing lighting system, smart-control requirements and electrical conditions.
2. Site Measurement
Conduct onsite metering and collect project data.
3. Lighting Design
Develop roadway lighting layouts using DIALux Evo, LitePro DLX, AutoCAD or AGi32 according to the project requirements.
4. Smart Control Coordination
Confirm the required combination of microwave motion sensing, light control and timer control.
5. Product Configuration
Confirm power, voltage, protection, optical and environmental parameters.
6. Production and Inspection
Prepare the specified 80W LED Street Lights according to the approved project configuration.
7. Delivery
Coordinate project packaging and shipment for the required quantity.
8. Installation
Complete or support project installation according to the agreed scope.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Project Data at a Glance
Location: Abu Dhabi, UAE Application: Urban Road Lighting Project Type: Smart Lighting Upgrade Product: LED Street Lights Power: 80W Quantity: 2,000 sets Luminous Efficiency: 150 lm/W LED: Lumileds SMD2835 CCT: 5000K ±300K CRI: Ra 80 Protection: IP66 Surge Protection: 10KV Voltage Resistance: 1.5KV Input Voltage: AC 220–240V Frequency: 50Hz Housing: Aluminum Alloy Lifespan: 30,000 hours Working Temperature: -20°C to 55°C Smart Control: Microwave Motion Sensor + Light Control + Timer Control Certification: ECAS / EESL / TDRA Warranty: 2 years Reported Energy Saving: 27% Engineering Services: Lighting & Circuitry Design / Onsite Metering / DIALux Evo / LitePro DLX / AutoCAD / AGi32 / Project Installation
Smart Lighting Project Delivery
For an urban roadway smart-lighting project, LIKELITE's project delivery model connects the product, control system and engineering service into one project workflow.
Project Requirement → Site Measurement → Lighting Design → Smart Control Configuration → Product Supply → Installation → Project Documentation
This structure allows EPC contractors, engineering companies, municipal procurement teams and bulk project buyers to evaluate the project based on both equipment specifications and engineering delivery requirements.
Smart Lighting Project FAQ
1. Where was this smart lighting project implemented?
The project was an urban road lighting upgrade in Abu Dhabi, United Arab Emirates.
2. What LED street lights were used?
The project used 80W LED Street Lights supplied by LIKELITE.
3. How many LED street lights were supplied?
The project quantity was 2,000 sets.
4. What is the luminous efficiency of the LED street lights?
The specified lamp luminous efficiency is 150 lm/W.
5. What smart control functions are included?
The project specification includes microwave motion sensing, light control and timer control.
6. Does the lighting system support intelligent operation?
Yes. The project combines LED Street Lights with three specified control functions: microwave motion sensing, light control and timer control.
7. What certifications are specified for the UAE project?
The project information lists ECAS, EESL and TDRA.
8. What was the reported energy-saving improvement?
The project data indicates a 27% energy-saving improvement. Actual savings depend on the baseline lighting system, operating schedule and control configuration.
9. What is the protection rating of the street lights?
The LED Street Lights are specified with IP66 protection.
10. What surge protection is provided?
The specified surge protection is 10KV.
11. What LED source is used?
The project uses Lumileds SMD2835 LED.
12. What lighting design software can LIKELITE support?
The listed engineering services include DIALux Evo, LitePro DLX, AutoCAD and AGi32.
13. Does LIKELITE provide onsite metering?
Yes. Onsite Metering is included in the stated project service scope.
14. Does LIKELITE provide project installation?
Yes. Project Installation is included in the stated engineering service scope.
15. Can LIKELITE support similar smart roadway lighting projects?
LIKELITE can support smart roadway lighting projects with LED Street Lights, lighting and circuitry design, onsite metering, professional lighting layouts, smart-control configuration and project installation services.
Start a Smart Road Lighting Project
For urban roads requiring LED lighting modernization and intelligent control, LIKELITE can support the project from site information and lighting design through equipment configuration, smart-control coordination and project installation.
Project information can include:
Project location
Road type
Existing lighting system
Existing pole configuration
Required quantity
Required LED power
Operating schedule
Smart-control requirements
Electrical conditions
Lighting design requirements
Certification requirements
Installation scope
LIKELITE — China Professional Outdoor LED Lighting Engineering Project Solution Provider
