LIKELITE supplied an industrial lighting upgrade solution for industrial workshops in Ahmadi, Kuwait, replacing the existing lighting arrangement with high-efficiency LED Flood Lights and an intelligent lighting control system.
The project was designed for a large industrial working environment where lighting performance, operating efficiency and long-term reliability were important requirements.
The completed configuration included 3,000 sets of 120W LED Flood Lights, supported by lighting design, onsite metering, lighting simulation and project installation services.
Project at a Glance
Item
Project Information
Project
Industrial Workshop Lighting Upgrade
Location
Ahmadi, Kuwait
Application
Industrial Workshops
Product
LED Flood Lights
Quantity
3,000 sets
Power
120W
Luminous Efficiency
140 lm/W
Protection
IP65
Certification
KUCAS
Warranty
2 years
Energy-Saving Improvement
25%
Control System
Microwave Motion Sensor + Light Control + Timer Control
Brand
LIKELITE
Origin
Guangdong, China
Project Requirement
The industrial workshop required an upgraded lighting system capable of providing reliable illumination across large working areas while reducing unnecessary lighting consumption.
The project requirements included:
Large-area workshop illumination
Efficient LED lighting
Reliable operation in the local environment
Improved lighting control
Reduced lighting energy consumption
Bulk project supply
Engineering lighting design
Installation support
Instead of treating the project as a simple luminaire replacement, LIKELITE approached the upgrade as an integrated lighting system involving product selection, lighting layout, control and installation.
Project Solution
LIKELITE configured 120W LED Flood Lights with a 120° beam angle and 140 lm/W luminous efficiency for the industrial workshop application.
The lighting system was combined with:
Microwave Motion Sensor for occupancy-based lighting control.
Light Control for adjusting lighting operation according to ambient light conditions.
Timer Control for managing lighting operation according to predefined operating periods.
The three control functions were integrated into the project lighting strategy to reduce unnecessary lighting operation while maintaining suitable illumination for workshop activities.
LED Flood Light Specification
The project used the following LED Flood Light configuration:
Technical Parameter
Project Configuration
Rated Power
120W
Input Voltage
AC 220–240V
Frequency
50Hz
LED Source
CREE SMD2835
Luminous Efficiency
140 lm/W
Beam Angle
120°
CCT
5000K ±400K
CRI
Ra80
IP Rating
IP65
Surge Protection
10KV
Voltage Resistance
1.5KV
Housing
Aluminum Alloy
Material
ALU + PC
Power Supply
AC
Lifespan
30,000 hours
Working Temperature
-20°C to 45°C
Certification
KUCAS
Warranty
2 years
Lighting Design and Engineering Services
The project was supported by engineering lighting services before and during implementation.
The scope included:
Lighting and circuitry design
Onsite metering
DIALux Evo layout
LitePro DLX layout
AutoCAD layout
AGi32 layout
Project installation
These engineering services were used to establish the lighting arrangement and coordinate the lighting system with the industrial workshop environment.
Lighting Layout and Simulation
For an industrial workshop, fixture quantity alone does not determine lighting performance.
The lighting arrangement needs to consider:
Workshop dimensions
Mounting positions
Installation height
Working zones
Equipment arrangement
Lighting coverage
Potential shadow areas
Electrical layout
Operating requirements
LIKELITE can use DIALux Evo, LitePro DLX, AutoCAD and AGi32 according to project requirements to develop and verify the proposed lighting arrangement.
Energy-Saving Result
The upgraded industrial lighting system delivered a reported 25% energy-saving improvement.
The improvement was supported by the combination of:
High-efficiency LED lighting
Appropriate lighting layout
Microwave motion sensing
Light control
Timer control
For industrial workshops operating for extended periods, controlling when and where lighting is operating can be as important as improving luminaire efficiency.
Actual energy consumption and savings should be evaluated against the existing lighting system, operating schedule and site conditions.
Project Scale
The project supplied:
3,000 sets
of:
120W LED Flood Lights
At 120W per luminaire, the nominal installed lighting load represented by the supplied luminaires was approximately 360 kW when operating at full rated power.
The intelligent control system provides an opportunity to reduce unnecessary operating hours depending on occupancy, ambient light and programmed operating periods.
Kuwait Industrial Environment
The project was located in Ahmadi, Kuwait, an important industrial area where lighting systems may need to operate under demanding environmental and operational conditions.
The selected luminaire configuration included:
IP65 protection
Aluminum alloy housing
10KV surge protection
-20°C to 45°C working temperature
30,000-hour rated lifespan
The final suitability of any lighting configuration should always be evaluated against the actual installation environment and project specifications.
Project Implementation
LIKELITE's project support followed an engineering-oriented process:
01 — Site Assessment
Review the industrial workshop, existing lighting and installation conditions.
02 — Onsite Metering
Collect site dimensions and relevant lighting information.
03 — Lighting Design
Develop the proposed luminaire arrangement and circuitry.
04 — Simulation
Prepare the required lighting layouts using appropriate engineering software.
05 — Product Supply
Supply the confirmed LED Flood Light configuration in the required project quantity.
06 — Installation
Support project installation according to the approved lighting arrangement.
07 — Performance Review
Review the completed lighting system and its operating configuration.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why This Project Matters for Industrial Lighting Buyers
This project demonstrates LIKELITE's ability to support a large-scale industrial lighting upgrade involving:
3,000 luminaires
120W LED Flood Lights
140 lm/W efficiency
IP65 protection
KUCAS certification
Intelligent lighting control
Engineering lighting design
Onsite metering
Lighting simulation
Project installation
25% energy-saving improvement
For EPC contractors, engineering companies and bulk project buyers, the project provides a practical reference for evaluating LIKELITE's industrial lighting supply and engineering capabilities.
Industrial Lighting Solutions vs. This Project
This project page is intentionally different from the Industrial Lighting Solutions page.
The Industrial Lighting Solutions page explains LIKELITE's overall capabilities, applications, design methodology and available solution configurations.
Planning an industrial workshop lighting upgrade or large-scale industrial lighting procurement?
LIKELITE can support project requirements from onsite assessment and lighting design through bulk LED Flood Light supply and project installation.
Send your project drawings, workshop dimensions, existing lighting information or required quantity to LIKELITE for project evaluation.
LIKELITE — Outdoor & Industrial LED Lighting Engineering Solutions
Project FAQ
1. Where was this industrial lighting project completed? The project was completed in Ahmadi, Kuwait, for industrial workshop lighting upgrading.
2. What product was used in the project? The project used LIKELITE 120W LED Flood Lights.
3. How many LED Flood Lights were supplied? The project quantity was 3,000 sets.
4. What was the luminous efficiency of the LED Flood Light? The specified luminous efficiency was 140 lm/W.
5. What certification was specified for the project? The LED Flood Light configuration was specified with KUCAS certification.
6. What was the energy-saving improvement? The reported energy-saving improvement was 25%.
7. What intelligent control system was used? The project used Microwave Motion Sensor, Light Control and Timer Control.
8. What was the IP rating of the LED Flood Lights? The specified protection rating was IP65.
9. What was the input voltage? The specified input voltage was AC 220–240V at 50Hz.
10. What LED source was used? The specified LED source was CREE SMD2835.
11. Did LIKELITE provide lighting design services? Yes. The project service scope included lighting and circuitry design, onsite metering, DIALux Evo, LitePro DLX, AutoCAD and AGi32 layouts.
12. Did LIKELITE provide installation support? Yes. Project installation was included in the specified service scope.
13. What was the warranty period? The specified warranty period was 2 years.
14. What was the rated lifespan of the LED Flood Lights? The specified rated lifespan was 30,000 hours.
15. Can LIKELITE provide similar Industrial Lighting Projects? Yes. LIKELITE can support industrial workshops, warehouses, manufacturing facilities and other project-based industrial lighting applications according to site and project requirements.
