Al Ahsa Industrial Workshop Lighting Upgrade Project/1,000 Sets of 100W LED Flood Lights for Industrial Workshop Lighting Retrofit in Saudi Arabia

Al Ahsa Industrial Workshop Lighting Upgrade

LIKELITE supplied LED lighting for an industrial workshop lighting upgrade project in Al Ahsa, Saudi Arabia.

The project used 1,000 sets of 100W LED Flood Lights, with SASO certification, IP65 protection and a stated luminaire efficiency of 120 lm/W.

The lighting system also incorporated:

Microwave Motion Sensor + Light Control + Timer Control

The project service scope covered lighting and circuitry design, onsite metering, lighting simulation layouts and project installation support.

Project Summary

Project Requirement

The Al Ahsa project focused on upgrading lighting within industrial workshop areas while improving lighting efficiency and operational control.

The project requirements included:

LED Lighting Upgrade

Replace or upgrade the existing workshop lighting configuration with high-efficiency LED Flood Lights.

Industrial Environmental Protection

The selected luminaire configuration provided IP65 protection, suitable for applications requiring protection against dust and water jets.

Energy Efficiency

The selected 100W LED Flood Light had a stated luminous efficiency of 120 lm/W.

Intelligent Lighting Operation

The lighting system incorporated motion sensing, light control and timer control to reduce unnecessary lighting operation where appropriate.

Engineering Project Support

The project required more than product delivery. LIKELITE's service scope included lighting design, onsite metering, simulation layouts and installation support.

Project Scope

Existing Lighting Assessment

The project began with assessment of the existing industrial workshop lighting conditions.

LIKELITE's onsite metering service can be used to collect relevant lighting information and establish the technical basis for the retrofit design.

Lighting and Circuitry Design

The lighting system was supported by Lighting and Circuitry Design to coordinate the LED lighting configuration with the project's electrical requirements.

Lighting Layout and Simulation

The project service included support for:

• DIALux Evo Layout

• LitePro DLX Layout

• AutoCAD Layout

• AGi32 Layout

These engineering tools can be used to evaluate luminaire positioning and lighting distribution before installation.

LED Flood Light Supply

The project quantity was:

1,000 sets × 100W LED Flood Lights

The final lighting arrangement should be based on the actual project layout and lighting calculation.

Project Installation

The service scope included Project Installation, supporting the implementation of the lighting system at the industrial workshop.

100W LED Flood Light Project Configuration

The Al Ahsa project used the following LED Flood Light configuration.

Smart Lighting Control System

The Al Ahsa project incorporated three lighting-control functions:

Microwave Motion Sensor

The microwave motion sensor supports automatic lighting operation based on movement in the monitored area.

This can be applied to workshop zones where occupancy varies during the operating cycle.

Light Control

Light control can be used to coordinate lighting operation with available ambient conditions where required.

Timer Control

Timer control allows the lighting system to operate according to predefined schedules.

Integrated Control Strategy

The project control configuration was:

Microwave Motion Sensor + Light Control + Timer Control

The purpose of combining these control functions is to reduce unnecessary lighting operation while maintaining lighting availability during required working periods.

Project Implementation

The Al Ahsa industrial workshop lighting upgrade followed a project-oriented implementation structure.

01 — Project Assessment

Review the existing workshop lighting system and project requirements.

02 — Onsite Metering

Collect relevant site lighting information.

03 — Lighting and Circuitry Design

Develop the lighting and electrical configuration.

04 — Lighting Simulation

Prepare DIALux Evo, LitePro DLX, AutoCAD or AGi32 layouts as required.

05 — Product Confirmation

Confirm:

100W LED Flood Lights + Smart Lighting Control

06 — Bulk Production and Supply

Supply:

1,000 sets

of project LED Flood Lights.

07 — Installation

Carry out project installation according to the approved project configuration.

08 — Control Commissioning

Configure the microwave motion sensor, light control and timer control functions.

Project Result

According to the project information supplied for this case, the Al Ahsa industrial workshop lighting upgrade achieved a reported:

20% Energy-Saving Result

The project result was associated with the combination of:

LED Lighting Efficiency

and

Intelligent Lighting Control

The 100W LED Flood Light provides a stated luminous efficiency of 120 lm/W, while the control system can reduce unnecessary lighting operation according to occupancy and operating schedules.

The reported 20% figure is the supplied project result for this case. Actual energy performance can vary according to existing lighting load, operating hours, occupancy, control settings and site conditions.

Project Data at a Glance

1,000 Sets

LED Flood Lights supplied

100W

Rated power per luminaire

100,000W

Nominal connected LED load

120 lm/W

Stated luminous efficiency

110°

Beam angle

IP65

Ingress protection

10KV

Surge protection

SASO

Project product certification

3 Years

Warranty

20%

Reported energy-saving result

Smart Control

Microwave Motion Sensor + Light Control + Timer Control

Engineering Services

LIKELITE's project service scope included:

Lighting and Circuitry Design

Lighting and related circuitry design support for the industrial workshop.

Onsite Metering

Onsite lighting measurement and project assessment.

DIALux Evo Layout

Professional lighting simulation and layout support.

LitePro DLX Layout

Additional lighting design and calculation support.

AutoCAD Layout

CAD-based engineering layout support.

AGi32 Layout

Lighting calculation and engineering layout support.

Project Installation

Project installation support for implementation of the lighting system.

Project Product Details

The supplied LED Flood Light was manufactured by LIKELITE in Guangdong, China.

Product Configuration

Product: LED Flood Lights
Power: 100W
Input: AC220V / 60Hz
LED: CREE SMD3030
Efficiency: 120 lm/W
Beam: 110°
IP: IP65
CCT: 5000K ± 300K
CRI: Ra80
Surge: 10KV
Voltage Resistance: 1.5KV
Lifespan: 30,000 Hours
Operating Temperature: -20°C to +45°C
Certification: SASO
Warranty: 3 Years

Before & After Comparison

DIALux EVO Lighting Simulation Verification

Why This Al Ahsa Project Is Relevant to Industrial Lighting Buyers

The project combines several requirements commonly found in industrial workshop lighting retrofits:

Industrial Workshop

LED Flood Lights

100W LED Configuration

120 lm/W Efficiency

IP65 Protection

SASO Certification

Smart Lighting Control

1,000-Set Bulk Supply

Lighting Engineering Services

This makes the project relevant to EPC contractors, engineering companies, industrial facility owners and bulk project buyers evaluating LED lighting upgrades in Saudi Arabia and other industrial markets.

Industrial Lighting Project FAQ

1. Where was the LIKELITE industrial lighting project located?

The project was located in Al Ahsa, Saudi Arabia.

2. What type of facility was upgraded?

The project involved industrial workshops requiring an LED lighting upgrade.

3. What type of LED lights were used?

The project used LIKELITE LED Flood Lights.

4. What was the LED Flood Light power?

Each luminaire was rated at 100W.

5. How many LED Flood Lights were supplied?

The project quantity was 1,000 sets.

6. What was the nominal connected LED load?

1,000 sets × 100W = 100kW nominal connected LED load.

7. What was the luminous efficiency?

The specified luminous efficiency was 120 lm/W.

8. What was the IP rating?

The LED Flood Lights were specified as IP65.

9. What certification was provided?

The project configuration was specified with SASO certification.

10. What smart lighting control system was used?

The project used:

Microwave Motion Sensor + Light Control + Timer Control.

11. What was the reported energy-saving result?

The supplied project information reports a 20% energy-saving result.

12. What was the warranty period?

The project configuration included a 3-year warranty.

13. What lighting engineering services did LIKELITE provide?

The service scope included Lighting and Circuitry Design, Onsite Metering, DIALux Evo Layout, LitePro DLX Layout, AutoCAD Layout, AGi32 Layout and Project Installation.

14. Can LIKELITE provide similar Industrial Lighting Projects in Saudi Arabia?

Yes. Similar projects can be evaluated according to the facility layout, mounting height, existing lighting system, operating hours, electrical requirements, environmental conditions and lighting targets.

15. Can the 100W configuration be used directly for another industrial workshop?

Not automatically. A new workshop should be assessed independently. The final wattage, quantity, installation position and control configuration should be confirmed through project-specific lighting design and calculation.

Al Ahsa Industrial Workshop Lighting Upgrade

Saudi Arabia | Industrial Workshop | 1,000 Sets | 100W LED Flood Lights | 120 lm/W | IP65 | SASO | 3-Year Warranty | Smart Lighting Control | 20% Reported Energy Saving

LIKELITE provides LED lighting products and engineering project support for EPC contractors, engineering companies, industrial facility owners, lighting distributors and bulk project buyers.

For a similar industrial workshop lighting project, project information can be submitted for technical evaluation, lighting design and product configuration.

Industrial Lighting Projects → Industrial Workshop Projects → LED Flood Lights → Smart Lighting Control → Lighting Design → Project Installation