Brazil Vitória Urban Road Smart Lighting Upgrade

3,500 Sets of 120W LED Street Lights with Intelligent Lighting Control

LIKELITE supplied an integrated LED street lighting and intelligent control solution for an urban roadway lighting upgrade in Vitória, Brazil.

The project focused on replacing and upgrading urban roadway lighting with high-efficiency LED Street Lights and a combined intelligent control system consisting of:

Microwave Motion Sensor + Light Control + Timer Control

The project was configured for Brazil's AC 127V/220V, 60Hz electrical environment and used an INMETRO-certified LED street lighting configuration.

Project Overview

Project Background

Urban Road Lighting Upgrade

The Vitória project required an upgraded roadway lighting configuration capable of combining efficient LED illumination with intelligent operating control.

For a municipal roadway lighting project, fixture efficiency alone does not determine the overall operating performance.

The project therefore used two complementary approaches:

High-efficiency LED lighting + intelligent lighting operation

The LED street lights provide the primary roadway illumination, while the control system is used to manage lighting operation according to environmental conditions, traffic activity, and predefined operating schedules.

Project Lighting Configuration

120W LED Street Lights

The project used 3,500 sets of 120W LED Street Lights.

The fixture configuration was developed for outdoor urban roadway use and included:

• Lumileds SMD3030 LED

• 130 lm/W luminous efficiency

• IP66 protection

• 10KV surge protection

• Aluminum alloy housing

• 30,000-hour rated lifespan

• CRI 80

• 5000K ±500K CCT

The electrical configuration supports:

AC 127V / 220V, 60Hz

This configuration was selected for the project electrical environment.

Intelligent Control System

Microwave Motion Sensor

The microwave motion sensor forms the traffic/activity detection component of the project control system.

The sensor can identify movement within the defined detection area and provide an input for the lighting control strategy.

This allows the lighting operation to respond to actual roadway activity rather than relying exclusively on a fixed lighting schedule.

Light Control

The light-control function manages the lighting system according to ambient daylight conditions.

This helps coordinate lighting operation with natural environmental conditions and reduces unnecessary daytime operation.

Timer Control

Timer control provides a predefined operating schedule.

The project can use programmed operating periods according to municipal requirements and roadway usage patterns.

The three control functions work as an integrated operating strategy:

Ambient Light → Motion Detection → Time Schedule → Lighting Operation

The actual control parameters are determined according to project requirements.

Project Engineering Process

01. Project Data Collection

Before final product configuration and lighting design, project information is reviewed.

Typical engineering data includes:

• Road geometry

• Pole height

• Pole spacing

• Fixture mounting position

• Existing lighting configuration

• Electrical voltage

• Roadway application

• Required lighting level

• Operating schedule

• Control requirements

This information forms the basis for fixture selection and lighting layout.

02. Onsite Metering

LIKELITE provides onsite metering support for roadway lighting projects.

The purpose is to establish the actual site conditions before finalizing the lighting configuration.

Site measurements can be used together with project drawings and roadway data for subsequent lighting calculations.

03. Lighting and Circuitry Design

The project engineering process includes lighting and circuitry design.

The design considers:

• LED fixture power

• Electrical input

• Lighting layout

• Circuit configuration

• Surge protection

• Intelligent control

• Maintenance requirements

The objective is to establish a practical lighting system rather than simply replacing existing lamps on a one-for-one basis.

04. Photometric Simulation

LIKELITE can provide project lighting calculations using:

DIALux Evo

Additional engineering formats include:

• LitePro DLX Layout

• AutoCAD Layout

• AGi32 Layout

These tools allow the proposed lighting configuration to be reviewed before installation.

Where project documentation is available, calculation files can be used to verify lighting distribution, fixture positioning, and roadway illumination performance.

Project Implementation

Product Supply

LIKELITE supplied the specified LED Street Lights for the project.

Quantity: 3,500 sets

Power: 120W per fixture

The products were manufactured in Guangdong, China under the LIKELITE brand.

Intelligent Control Integration

The project incorporated:

Microwave Motion Sensor + Light Control + Timer Control

The control architecture was designed to provide multiple operating inputs rather than relying on a single fixed operating mode.

This allows the roadway lighting system to be configured around:

• Ambient daylight

• Roadway activity

• Time-based operation

• Project-specific control requirements

Project Installation Support

LIKELITE's available project engineering services include:

• Lighting and Circuitry Design

• Onsite Metering

• DIALux Evo Layout

• LitePro DLX Layout

• AutoCAD Layout

• AGi32 Layout

• Project Installation Support

The exact service scope is determined according to the project contract and implementation requirements.

Project Result

28% Reported Energy Saving

The Vitória urban roadway lighting application reported an energy-saving improvement of 28%.

The result reflects the combination of:

120W high-efficiency LED Street Lights + intelligent lighting control

Rather than evaluating energy consumption only at the fixture level, the project introduced operational control to reduce unnecessary lighting operation.

Actual energy performance depends on:

• Existing lighting system

• Previous fixture wattage

• Daily operating hours

• Traffic conditions

• Control parameters

• Dimming/operating strategy

• Local electricity conditions

Technical Specifications

Before & After Comparison

DIALux EVO Lighting Simulation Verification

Why This Project Matters

The Vitória project demonstrates a practical approach to municipal roadway lighting modernization:

LED Efficiency → Intelligent Control → Engineering Design → Installation Support → Energy Optimization

The project is not positioned only as an LED fixture replacement.

It demonstrates how a high-efficiency LED street lighting system can be combined with intelligent operating controls for urban roadway applications.

LIKELITE Project Capability

LIKELITE supports overseas contractors, engineering companies, lighting brands, distributors, and municipal procurement teams with project-oriented outdoor LED lighting supply.

For roadway lighting projects, the available support can cover:

Project Data → Lighting Design → Product Selection → Photometric Simulation → Manufacturing → Control Configuration → Installation Support

This project-oriented workflow allows LIKELITE to participate in infrastructure lighting projects beyond standard product supply.

Smart Lighting Project FAQ

1. Where was the Vitória Smart Lighting Project located?

The project was an urban roadway smart lighting upgrade in Vitória, Brazil.

2. How many LED street lights were supplied?

The project quantity was 3,500 sets.

3. What was the power rating?

The project used 120W LED Street Lights.

4. What certification was specified?

The project configuration used INMETRO certification.

5. What intelligent control system was used?

The project used:

Microwave Motion Sensor + Light Control + Timer Control

6. What energy-saving result was reported?

The project reported an energy-saving improvement of 28%.

7. What input voltage was used?

The LED street lights support AC 127V / 220V input.

8. What LED chip was used?

The project configuration used Lumileds SMD3030 LED.

9. What was the luminous efficiency?

The specified luminous efficiency was 130 lm/W.

10. What was the protection rating?

The fixture used IP66 protection and 10KV surge protection.

11. What was the LED street light lifespan?

The specified rated lifespan was 30,000 hours.

12. What was the warranty period?

The project configuration included a 2-year warranty.

13. Can LIKELITE provide DIALux calculations for similar projects?

Yes. LIKELITE can provide DIALux Evo layouts and other engineering formats such as LitePro DLX, AutoCAD, and AGi32 according to project requirements.

14. Can the control system be customized?

Yes. The control strategy can be configured according to roadway conditions, operating schedules, traffic requirements, and project specifications.

15. Can LIKELITE support complete roadway lighting projects?

Yes. Available services include lighting and circuitry design, onsite metering, photometric layout, product supply, and project installation support.

Request a Similar Smart Lighting Project

If you are planning an urban roadway LED retrofit, municipal lighting upgrade, or smart street lighting project, send LIKELITE the basic project information:

Project Location + Road Width + Pole Height + Pole Spacing + Existing Wattage + Quantity + Input Voltage + Lighting Standard + Control Requirements

LIKELITE can evaluate the appropriate LED Street Lights, intelligent control configuration, and engineering design requirements for your project.

LIKELITE

Outdoor LED Lighting Manufacturer & Project Solution Provider

Smart Lighting Projects | LED Street Lights | Urban Road Lighting | Municipal Lighting