LIKELITE supplied an industrial lighting upgrade for workshops in Budapest, Hungary, using 500 units of 150W LED Flood Lights with intelligent lighting controls.
The project was designed for industrial workshop environments requiring reliable illumination, reduced energy consumption, and flexible lighting control. The lighting system combines high-efficiency LED floodlights with microwave motion sensing, light control, and timer control.
Project Location: Budapest, Hungary Application: Industrial Workshops Lighting Product: LED Flood Lights Quantity: 500 sets Rated Power: 150W Certification: CE / ENEC Energy Saving: 22% Warranty: 2 Years Control System: Microwave Motion Sensor + Light Control + Timer Control
Project Overview
Industrial workshops often require long operating hours and consistent lighting across production, storage, maintenance, and circulation areas. Conventional lighting systems can result in unnecessary energy consumption when lighting remains fully operational during periods of low occupancy or sufficient daylight.
For this Budapest project, LIKELITE supplied a 150W LED Flood Light system designed around high luminous efficiency and intelligent lighting control.
The project configuration combines:
500 × 150W LED Flood Lights
CREE SMD2835 LED light source
160 lm/W luminous efficiency
IP65 protection
120° beam angle
5000K ±300K color temperature
10KV surge protection
Microwave motion sensor
Light control
Timer control
The completed lighting configuration achieved an estimated 22% energy-saving improvement compared with the previous lighting arrangement.
Project Scope
The project covered the lighting upgrade of industrial workshop areas in Budapest.
LIKELITE's project support included lighting and circuitry design, onsite metering, lighting simulation and layout support, and installation support.
Engineering support included:
Lighting and circuitry design
Onsite metering
DIALux Evo layout
Litepro DLX layout
AutoCAD layout
AGi32 layout
Project installation support
The engineering approach focused on selecting suitable mounting positions, beam coverage, lighting distribution, circuit arrangement, and control zones before installation.
Lighting System Configuration
Project Item
Specification
Project
Budapest Industrial Workshop Lighting Upgrade
Location
Budapest, Hungary
Application
Industrial Workshops
Product
LED Flood Lights
Quantity
500 sets
Power
150W
Input Voltage
230V AC
Frequency
50Hz
Luminous Efficiency
160 lm/W
Light Source
CREE SMD2835 LED
Beam Angle
120°
CCT
5000K ±300K
CRI
Ra ≥80
IP Rating
IP65
Surge Protection
10KV
Voltage Resistance
1.5KV
Material
Aluminum Alloy + PC
Power Supply
AC
Lifespan
30,000 hours
Working Temperature
-20°C to 45°C
Certification
CE / ENEC
Warranty
2 Years
Energy Saving
22%
Intelligent Lighting Control
The project incorporated three control functions to reduce unnecessary lighting operation:
Microwave Motion Sensor
Motion detection allows lighting operation to respond to activity within designated workshop areas. This is particularly useful for areas with variable occupancy.
Light Control
Light control can adjust lighting operation according to ambient conditions and the requirements of the workshop environment.
Timer Control
Timer control provides scheduled operation for areas with predictable working hours, helping prevent unnecessary operation outside designated periods.
The three control functions can be configured according to project requirements and lighting zones.
LED Flood Light Design
The selected 150W LED Flood Light uses a CREE SMD2835 LED light source with a stated luminous efficiency of 160 lm/W.
The 120° beam angle provides broad light distribution for workshop areas where wide-area illumination is required.
The aluminum alloy housing provides the mechanical structure for the fixture, while the IP65 rating is designed for industrial environments where protection against dust and water exposure is required.
LIKELITE can support project lighting calculations and layout preparation using:
DIALux Evo
Litepro DLX
AutoCAD
AGi32
The design process can be used to evaluate fixture positioning, beam coverage, lighting distribution, mounting arrangements, and project-specific lighting requirements before installation.
For EPC contractors, engineering companies, industrial facility owners, and project procurement teams, these design outputs provide a technical basis for reviewing the proposed lighting configuration.
Installation & Project Implementation
The project implementation followed an engineering-oriented workflow:
Site Assessment → Lighting Design → Layout & Simulation → Product Configuration → Control Configuration → Installation → Project Verification
Onsite metering can be used to understand existing lighting conditions and support fixture selection.
The final installation arrangement is determined according to workshop layout, mounting height, working areas, circulation areas, equipment locations, and required lighting coverage.
Project Result
The Budapest industrial workshop lighting upgrade delivered the following project configuration:
500 sets of 150W LED Flood Lights
22% energy-saving improvement
160 lm/W stated luminous efficiency
IP65 industrial protection
10KV surge protection
Microwave + Light + Timer intelligent control
CE / ENEC certification
2-year warranty
The combination of efficient LED fixtures and intelligent control provides a practical approach for industrial facilities seeking to reduce lighting energy consumption while maintaining reliable workshop illumination.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why This Project Matters to Industrial Buyers
For industrial lighting procurement, the key requirement is not simply purchasing LED fixtures. The lighting system needs to match the actual workshop environment, operating schedule, installation conditions, and control requirements.
This project demonstrates LIKELITE's capability to support a complete industrial lighting project from lighting design and onsite assessment through product configuration, control integration, layout preparation, and installation support.
The same project methodology can be adapted for:
Industrial workshops
Manufacturing facilities
Warehouses
Logistics centers
Production halls
Maintenance buildings
Industrial compounds
Large indoor/outdoor work areas
Project Technical Summary
Location: Budapest, Hungary Project Type: Industrial Workshop Lighting Upgrade Client Type: Industrial / Project Procurement Product: 150W LED Flood Lights Quantity: 500 sets Efficiency: 160 lm/W Protection: IP65 LED: CREE SMD2835 Beam Angle: 120° CCT: 5000K ±300K CRI: Ra ≥80 Surge: 10KV Control: Microwave Motion Sensor + Light Control + Timer Control Certification: CE / ENEC Warranty: 2 Years Energy Saving: 22%
FAQ
1. What lighting product was used in the Budapest industrial workshop project?
The project used 500 sets of 150W LED Flood Lights supplied by LIKELITE.
2. How many LED Flood Lights were supplied?
The project configuration included 500 sets.
3. What was the power rating of the LED Flood Lights?
Each LED Flood Light was rated at 150W.
4. What was the luminous efficiency?
The specified lamp luminous efficiency was 160 lm/W.
5. What LED chips were used?
The lighting specification used CREE SMD2835 LED light sources.
6. What protection rating did the fixtures have?
The LED Flood Lights were rated IP65.
7. Did the project include intelligent lighting controls?
Yes. The control system included microwave motion sensors, light control, and timer control.
8. What was the reported energy-saving improvement?
The project specification indicates a 22% energy-saving improvement.
9. What certifications were specified?
The project lighting products were specified with CE and ENEC certification.
10. What was the warranty period?
The project included a 2-year warranty.
11. Can LIKELITE provide lighting simulation for industrial projects?
Yes. LIKELITE provides lighting design and layout support using DIALux Evo, Litepro DLX, AutoCAD, and AGi32.
12. Can LIKELITE support onsite lighting assessment?
Yes. Onsite metering and project-specific lighting assessment can be included according to project requirements.
13. What operating temperature is specified for the LED Flood Lights?
The specified working temperature is -20°C to 45°C.
14. What surge protection is provided?
The lighting specification includes 10KV surge protection.
15. Can LIKELITE supply LED lighting for large industrial projects?
Yes. LIKELITE supports bulk project procurement and engineering lighting projects, including product configuration, lighting design, simulation, control requirements, and project installation support.
Discuss Your Industrial Lighting Project
If you are planning an industrial workshop, manufacturing facility, warehouse, logistics center, or other large-scale lighting upgrade, LIKELITE can support the project from lighting design and product selection through project supply and installation coordination.
Send us your workshop layout, existing lighting information, required quantity, mounting height, or project specifications.
LIKELITE — Outdoor & Industrial LED Lighting Project Solutions
