Municipal Roadway Lighting Upgrade with 5,500 Sets of 100W LED Roadway Lights
LIKELITE supplied a 100W LED Roadway Lighting configuration for an ordinary roadway lighting upgrade project in Buenos Aires, Argentina.
The project involved 5,500 sets of LED Roadway Lights, specified for AC 220V / 50Hz operation, with IP66 protection, CREE SMD3030 LED, 130 lm/W luminous efficacy and 10KV surge protection.
The specified project configuration carried a 2-year warranty and achieved an approximately 22% energy-saving improvement under the project conditions.
Project Overview
Project Item
Project Information
Project Location
Buenos Aires, Argentina
Project Type
Ordinary Roadway Lighting Upgrade
Product
LED Roadway Lights
Power
100W
Quantity
5,500 sets
Certification
S-Mark
Input Voltage
AC 220V
Frequency
50Hz
IP Rating
IP66
Luminous Efficiency
130 lm/W
Surge Protection
10KV
Warranty
2 Years
Energy-Saving Improvement
22%
Brand
LIKELITE
Origin
Guangdong, China
Project Requirement
The Buenos Aires project required an LED roadway lighting configuration suitable for an ordinary roadway upgrade.
The key requirements included:
Large-volume roadway lighting supply
AC 220V power system compatibility
Outdoor environmental protection
High-efficiency LED lighting
Reliable surge protection
Appropriate roadway optical distribution
Local certification requirement
Long-term outdoor operation
Reduced energy consumption
Consistent product supply for 5,500 sets
The project configuration was developed around these requirements rather than selecting the LED fixture only by nominal wattage.
LIKELITE Project Configuration
100W LED Roadway Lights
The selected LIKELITE roadway lighting configuration uses a 100W LED fixture with a 120° beam angle and 130 lm/W luminous efficacy.
Electrical Configuration
Input Voltage: AC 220V Frequency: 50Hz Power Supply: AC Voltage Resistance: 1.5KV Surge Protection: 10KV
The electrical configuration was specified for the project's AC 220V / 50Hz operating environment.
LED & Optical Configuration
Light Source: CREE SMD3030 LED Luminous Efficiency: 130 lm/W Beam Angle: 120° Color Temperature: 5000K ± 400K CRI: Ra 80
The 120° optical configuration provides broad light distribution for the roadway application.
Mechanical & Environmental Configuration
IP Rating: IP66 Lamp Body: Aluminum Alloy Material: ALU + PC Working Temperature: -20°C to 45°C Specified Lifespan: 30,000 Hours
The IP66-rated housing and aluminum alloy lamp body are configured for outdoor roadway operating conditions.
Project Performance
22% Energy-Saving Improvement
The Buenos Aires roadway upgrade achieved an approximately 22% energy-saving improvement under the specified project conditions.
Energy savings in roadway renovation Projects are influenced by the original lighting system, existing fixture wattage, operating hours, replacement configuration, lighting requirements and control strategy.
For this project, the 100W LED Roadway Light configuration was used as the basis for the specified energy-efficiency improvement.
Project Result: 22% energy-saving improvement
5,500 Sets for Large-Scale Roadway Upgrade
The project required a total of:
5,500 Sets
The quantity required consistent product configuration and stable manufacturing capacity throughout the project supply.
For a large-volume roadway lighting project, consistency between batches is important for:
Electrical performance
Optical performance
Mechanical dimensions
Installation compatibility
Product appearance
Project maintenance
Spare-part management
LIKELITE supports bulk roadway lighting supply from its manufacturing base in Guangdong, China.
Engineering & Lighting Design Support
The project was supported by LIKELITE's roadway lighting engineering capabilities.
Lighting And Circuitry Design
Lighting and electrical configuration support based on project requirements.
Onsite Metering
Existing roadway conditions can be measured and evaluated as part of the project design process.
DIALux Evo Layout
Roadway lighting simulation and photometric layout support.
LitePro Dlx Layout
Lighting calculation and design support.
AutoCAD Layout
Technical roadway and electrical drawing support.
AGi32 Layout
Professional photometric calculation support.
Project Installation
Project installation support according to the agreed project scope.
These services connect the supplied LED roadway fixtures with the actual roadway application.
Project Product Specification
Technical Parameter
Project Configuration
Product Name
LED Roadway Lights
Rated Power
100W
Input Voltage
AC 220V
Frequency
50Hz
Light Source
CREE SMD3030 LED
Beam Angle
120°
Luminous Efficiency
130 lm/W
IP Rating
IP66
Surge Protection
10KV
Voltage Resistance
1.5KV
CCT
5000K ± 400K
CRI
Ra 80
Material
ALU + PC
Lamp Body
Aluminum Alloy
Lifespan
30,000 Hours
Working Temperature
-20°C to 45°C
Power Supply
AC
Certification
S-Mark
Warranty
2 Years
Brand
LIKELITE
Origin
Guangdong, China
Package Size
57 × 18 × 8 cm
Gross Weight
9.45 kg / set
Project Supply
Product
100W LED Roadway Lights
Quantity
5,500 sets
Certification
S-Mark
Warranty
2 Years
Energy-Saving Improvement
22%
Installation Environment
Outdoor roadway
Electrical System
AC 220V / 50Hz
Why This Project Matters
The Buenos Aires project demonstrates LIKELITE's ability to support a large-volume roadway lighting upgrade with a defined product specification and engineering service package.
For contractors, EPC companies, engineering companies and bulk lighting buyers, this project provides a practical reference for evaluating LIKELITE's roadway lighting supply capability.
Project Application
Ordinary Roadway Lighting
The project configuration was designed for an ordinary roadway lighting upgrade rather than a high-mast or sports-lighting application.
Municipal Road Upgrade
The configuration is applicable to municipal roadway renovation programs where existing outdoor lighting systems are upgraded to LED.
Large-Volume Replacement
5,500 sets demonstrate the project's large-volume replacement requirement and the importance of consistent product supply.
LIKELITE Manufacturing
Place of Origin: Guangdong, China
LIKELITE supplies outdoor LED lighting Products for international project applications.
For roadway lighting Projects, production focuses on maintaining consistency across large-volume orders and matching the confirmed project specification.
The Buenos Aires project specification included:
100W rated power
CREE SMD3030 LED
130 lm/W
IP66
10KV surge protection
AC 220V
S-Mark certification
2-year warranty
Before & After Comparison
DIALux EVO Lighting Simulation Verification
Project Data at a Glance
Location: Buenos Aires, Argentina Application: Ordinary Roadway Lighting Upgrade Product: LED Roadway Lights Power: 100W Quantity: 5,500 sets Certification: S-Mark IP Rating: IP66 Efficiency: 130 lm/W Surge: 10KV Warranty: 2 Years Energy-Saving Improvement: 22% Brand: LIKELITE Manufacturing Origin: Guangdong, China
Need a Similar Roadway Lighting Project?
If you are planning a roadway lighting upgrade with similar requirements, LIKELITE can evaluate your project based on:
Road width
Number of lanes
Pole height
Pole spacing
Existing fixture wattage
Existing lighting conditions
Project quantity
Input voltage
Local certification
Lighting requirements
Energy-saving target
Provide the project drawings or basic roadway information to request a product recommendation, lighting calculation or quotation.
Buenos Aires Roadway Lighting Project FAQ
1. Where was this roadway lighting project located?
The project was located in Buenos Aires, Argentina.
2. What type of project was it?
It was an ordinary roadway lighting upgrade project.
3. What LED roadway light was used?
The project configuration used a 100W LIKELITE LED Roadway Light.
4. How many LED roadway lights were supplied?
The specified project quantity was 5,500 sets.
5. What certification was required?
The project configuration used S-Mark certification.
6. What was the input voltage?
The specified input voltage was AC 220V, with a frequency of 50Hz.
7. What LED source was used?
The specified light source was CREE SMD3030 LED.
8. What was the luminous efficiency?
The specified luminous efficiency was 130 lm/W.
9. What was the IP protection level?
The roadway light was specified with IP66 protection.
10. What surge protection was specified?
The project configuration specified 10KV surge protection.
11. What was the project warranty?
The specified product warranty was 2 years.
12. What energy-saving improvement was achieved?
The project reported an approximately 22% energy-saving improvement under the specified project conditions.
13. What color temperature was used?
The specified color temperature was 5000K ± 400K, with Ra 80 color rendering.
14. What engineering services did LIKELITE provide?
The project service scope included Lighting And Circuitry Design, Onsite Metering, DIALux Evo Layout, LitePro Dlx Layout, AutoCAD Layout, AGi32 Layout and Project Installation.
15. Can LIKELITE provide a similar roadway lighting project?
Yes. Project information such as road dimensions, pole height, pole spacing, existing lighting and quantity can be submitted for a similar LED roadway lighting evaluation and quotation.
