Municipal road lighting requires more than replacing conventional lamps with LED fixtures.
A successful municipal lighting upgrade must consider existing poles, road geometry, electrical infrastructure, lighting levels, operating schedules, maintenance requirements, energy consumption and local compliance requirements.
LIKELITE provides integrated municipal LED street lighting solutions for cities, municipalities, EPC contractors, road contractors, lighting engineering companies and public infrastructure procurement projects.
From onsite assessment and lighting design to DIALux simulation, product configuration and project installation support, the lighting system is developed around the actual road and infrastructure conditions.
Municipal Lighting Solution at a Glance
| Item | Solution Configuration |
|---|---|
| Application | Municipal Road Lighting |
| Typical Upgrade | Conventional Lighting → LED |
| Reference Product | 80W LED Street Lights |
| Reference Project | Antalya, Türkiye |
| Reference Quantity | 6,000 Sets |
| Reference Energy Saving | 22% |
| Input Voltage | AC230V ±10% |
| LED Source | Lumileds SMD2835 |
| Luminous Efficiency | 130 lm/W |
| IP Rating | IP66 |
| Beam Angle | 120° |
| Surge Protection | 10KV |
| CCT | 5000K ±500K |
| CRI | Ra80 |
| Control | Microwave Motion Sensor + Light Control + Timer Control |
| Warranty | 2 Years |
Municipal Lighting Challenges
Municipal lighting systems often have different requirements from one road to another.
A citywide retrofit may include:
Existing high-pressure sodium or conventional fixtures
Different pole heights
Different road widths
Different pole spacing
Different mounting arrangements
Variable traffic conditions
Different operating schedules
Aging electrical infrastructure
High maintenance costs
Increasing energy costs
Requirements for intelligent lighting control
A suitable LED replacement therefore needs to be evaluated as a lighting system, rather than only as a lamp wattage replacement.
LIKELITE Municipal Lighting Solution
From Existing Road Data to LED Lighting System
LIKELITE structures municipal lighting projects around five engineering stages:
Assessment
↓
Lighting Design
↓
Product Configuration
↓
Simulation & Verification
↓
Supply & Installation
This approach allows the LED fixture, optical distribution, electrical configuration and control strategy to be considered together.
01. Existing Lighting Assessment
Before selecting the final LED street light, the existing lighting system should be reviewed.
Typical project information includes:
Road Information
Road width
Lane configuration
Median arrangement
Intersection conditions
Pedestrian areas
Roadside environment
Pole Information
Pole height
Pole spacing
Arm length
Fixture mounting angle
Existing fixture dimensions
Electrical Information
Existing input voltage
Circuit configuration
Operating frequency
Existing power consumption
Control cabinet configuration
Lighting Information
Existing fixture wattage
Existing illuminance
Lighting uniformity
Operating schedule
Existing maintenance condition
This information provides the basis for the replacement design.
02. Onsite Metering
For retrofit projects, field data can be used to establish the existing lighting condition.
LIKELITE supports:
Onsite Metering
Typical measurements may include:
Existing illuminance
Roadway lighting distribution
Electrical operating conditions
Existing fixture performance
The measured information can then be incorporated into the engineering evaluation.
03. Municipal Road Lighting Design
The LED system should be designed according to the actual roadway configuration.
LIKELITE supports lighting and circuitry design based on:
Road dimensions
Pole arrangement
Mounting height
Mounting angle
Pole spacing
Fixture optical distribution
Electrical conditions
Lighting requirements
The objective is not simply to select the lowest wattage.
The objective is to achieve the required lighting performance with an appropriate LED system.
04. DIALux Evo Lighting Simulation
LIKELITE provides lighting simulation support using:
DIALux Evo
LitePro DLX
AutoCAD
AGi32
The lighting model can be developed from actual project dimensions and fixture photometric files.
Typical design inputs include:
Road width
Number of lanes
Pole height
Pole spacing
Overhang
Tilt angle
Photometric distribution
Required lighting criteria
The final simulation should be based on the actual project configuration.
05. 80W LED Street Light Configuration
The Antalya municipal lighting reference uses:
80W LED Street Lights
with:
130 lm/W
Lumileds SMD2835 LED
IP66
10KV Surge Protection
120° Beam Angle
Ra80
5000K ±500K
This configuration is suitable as a reference for municipal roadway retrofit evaluation.
For each new project, the final wattage should be confirmed through the actual lighting calculation rather than copied directly from the reference project.
06. Smart Municipal Lighting Control
The reference configuration includes:
Microwave Motion Sensor
Detects changes in movement around the lighting area and can support adaptive lighting operation.
Light Control
Supports automatic lighting operation according to ambient light conditions.
Timer Control
Allows lighting schedules to be configured according to operating requirements.
The three control functions can be combined according to the project requirements.
For municipal applications, intelligent control can help reduce unnecessary operating hours and improve the flexibility of the lighting system.
07. Outdoor Protection
Municipal street lights operate continuously in outdoor environments.
The reference fixture uses:
IP66
protection.
The fixture configuration includes:
Aluminum Alloy Lamp Body
ALU + PC Construction
and:
10KV Surge Protection
This configuration is intended for outdoor roadway lighting applications.
08. Wide Electrical Compatibility
The reference product is specified for:
AC230V ±10%
with:
50Hz
operating frequency.
For each municipal project, the actual electrical conditions should be confirmed before final product selection.
LIKELITE can evaluate the customer's:
Input voltage
Frequency
Circuit configuration
Control system
Surge protection requirements
before production.
09. Municipal Energy-Saving Strategy
LED retrofit projects are normally evaluated against the existing lighting system.
The Antalya reference project reported:
22% Energy-Saving Improvement
The actual energy-saving result of a new project depends on:
Existing fixture wattage
New LED wattage
Daily operating hours
Annual operating hours
Dimming strategy
Motion detection
Timer settings
Existing electrical efficiency
Therefore, the 22% figure is a project reference result, not a universal guarantee.
For a new project, LIKELITE can calculate the estimated energy-saving potential using the customer's actual existing lighting data.
10. Municipal Lighting Compliance
The Antalya reference product configuration includes:
CE
TSE
Certification requirements should always be checked against:
Destination country
Local regulations
Project tender requirements
Exact product model
Electrical system
Procurement specifications
LIKELITE can provide the applicable technical and compliance documentation according to the confirmed product configuration.
Municipal Lighting Engineering Services
LIKELITE supports the following engineering services:
Lighting & Circuitry Design
Roadway lighting and electrical system design support.
Onsite Metering
Existing lighting and field-condition assessment.
DIALux Evo Layout
Professional roadway lighting simulation.
LitePro DLX Layout
Alternative lighting calculation and layout support.
AutoCAD Layout
Engineering drawings and installation layouts.
AGi32 Layout
Lighting calculation and engineering support.
Project Installation
Installation support according to project requirements.
Municipal Lighting Product Specification
80W LED Street Lights
| Parameter | Specification |
|---|---|
| Product | LED Street Lights |
| Power | 80W |
| Input Voltage | AC230V ±10% |
| Frequency | 50Hz |
| LED Source | Lumileds SMD2835 |
| Efficiency | 130 lm/W |
| Beam Angle | 120° |
| IP Rating | IP66 |
| Surge | 10KV |
| Voltage Resistance | 1.5KV |
| CCT | 5000K ±500K |
| CRI | Ra80 |
| Lamp Body | Aluminum Alloy |
| Material | ALU + PC |
| Lifespan | 30,000 Hours |
| Working Temperature | -20°C to +45°C |
| Warranty | 2 Years |
| Package Size | 55 × 16 × 7 cm |
| Gross Weight | 7.55 kg |
| Brand | LIKELITE |
| Origin | Guangdong, China |
Municipal Lighting Solution Workflow
Step 1 — Project Data
Customer provides:
Road Drawings + Pole Data + Existing Lighting Data + Electrical Information
↓
Step 2 — Site Assessment
Onsite Metering + Existing System Review
↓
Step 3 — Lighting Design
Roadway Layout + Fixture Selection + Optical Configuration
↓
Step 4 — Simulation
DIALux Evo / LitePro DLX / AGi32
↓
Step 5 — Technical Confirmation
LED Fixture + Electrical + Control + Compliance
↓
Step 6 — Commercial Proposal
Product + Quantity + Engineering + Delivery
↓
Step 7 — Production
Bulk Manufacturing & Quality Control
↓
Step 8 — Installation
Project Installation Support
Reference Project: Antalya Municipal Road Lighting Upgrade
The following project is used as an engineering reference rather than the primary purpose of this Solutions page.
Location: Antalya, Türkiye
Product: LED Street Light
Power: 80W
Quantity: 6,000 Sets
Reported Energy-Saving Improvement: 22%
Control: Microwave Motion Sensor + Light Control + Timer Control
Certification: CE / TSE
Warranty: 2 Years
The complete project information should be presented separately on the dedicated:
Municipal Lighting Projects page.
Why Choose LIKELITE for Municipal Lighting
Engineering-Based Product Selection
Product selection is based on project requirements rather than wattage alone.
Large-Volume Supply
The reference project demonstrates a supply quantity of:
6,000 sets
Lighting Simulation
Support for:
DIALux Evo / LitePro DLX / AutoCAD / AGi32
Smart Control Integration
Support for:
Motion Sensor + Light Control + Timer Control
Outdoor LED Configuration
Reference configuration includes:
IP66 + 10KV Surge + Aluminum Alloy Housing
Project-Oriented Support
From technical evaluation to bulk production and installation support.
Who This Solution Is For
LIKELITE Municipal Lighting Solutions are intended for:
Municipal governments
Public infrastructure procurement
EPC contractors
Road contractors
Lighting engineering companies
Electrical contractors
Lighting distributors
Urban development projects
Smart city projects
Large-scale LED retrofit projects
Municipal Lighting Solutions FAQ
1. What is a municipal lighting solution?
A municipal lighting solution combines LED street lights, roadway lighting design, electrical configuration, lighting simulation, control systems and project implementation.
2. What LED street light is used in the Antalya reference?
The reference configuration uses an 80W LED Street Light.
3. How many fixtures were included in the Antalya reference project?
The reference quantity was 6,000 sets.
4. What energy-saving improvement was reported?
The reference project reported 22% energy-saving improvement.
5. Does LIKELITE provide smart lighting control?
Yes. The reference configuration supports Microwave Motion Sensor + Light Control + Timer Control.
6. What is the efficiency of the reference LED street light?
The specified luminous efficiency is 130 lm/W.
7. What LED source is used?
The reference configuration uses Lumileds SMD2835 LED.
8. What is the IP rating?
The reference product is specified as IP66.
9. Does the street light have surge protection?
Yes. The specified surge protection is 10KV.
10. What lighting design software does LIKELITE support?
LIKELITE supports DIALux Evo, LitePro DLX, AutoCAD and AGi32.
11. Can LIKELITE perform onsite metering?
Yes. Onsite metering can be included according to project requirements.
12. Can the existing street lights be replaced without changing the poles?
Potentially, depending on the existing pole height, arm configuration, mounting diameter, fixture dimensions and new lighting calculation.
13. Is 80W suitable for every municipal road?
No. The correct wattage depends on the road geometry, pole arrangement, mounting height, spacing, photometric distribution and required lighting performance.
14. What certifications are included in the Antalya reference?
The reference specifies CE / TSE.
The applicable compliance requirements for a new project should be confirmed according to the destination market and tender specifications.
15. Can LIKELITE provide a complete municipal lighting proposal?
Yes. Customers can provide project drawings and existing lighting information for evaluation of:
LED Street Lights + Lighting Design + DIALux + Control System + Engineering Drawings + Commercial Proposal
Request a Municipal Lighting Solution
Planning a municipal LED street lighting upgrade?
Send LIKELITE:
Project Location
Road Drawings
Existing Fixture Information
Pole Height & Spacing
Electrical Information
Required Quantity
Lighting Requirements
LIKELITE can evaluate the project and provide a project-specific:
LED Street Light Configuration
Lighting Design
DIALux Simulation
Smart Control Configuration
Commercial Proposal
