Frankfurt Industrial Workshop Lighting Upgrade
LIKELITE supplied a complete LED lighting upgrade for an industrial workshop in Frankfurt, Germany, replacing the existing lighting system with high-efficiency LED Flood Lights and intelligent lighting controls.
The project covered 600 sets of 120W LED Flood Lights, supported by lighting and circuitry design, onsite metering, lighting simulation and project installation services.
The lighting system was configured with Microwave Motion Sensor + Light Control + Timer Control to improve lighting operation according to workshop occupancy, ambient conditions and operating schedules.
Project Overview
| Project Item | Project Data |
|---|---|
| Project | Industrial Workshop Lighting Upgrade |
| Location | Frankfurt, Germany |
| Application | Industrial Workshop |
| Project Type | Existing Lighting Retrofit |
| Product | LED Flood Lights |
| Power | 120W |
| Quantity | 600 sets |
| Certification | GS |
| Protection | IP65 |
| Efficiency | 120 lm/W |
| Beam Angle | 110° |
| Warranty | 3 years |
| Energy-Saving Result | 30% |
| Lighting Control | Microwave Motion Sensor + Light Control + Timer Control |
| Brand | LIKELITE |
| Origin | Guangdong, China |
Project Requirement
The Frankfurt industrial workshop required a lighting upgrade based on three primary objectives:
1. Improve the efficiency of the lighting system
The project used 120W LED Flood Lights with a stated luminaire efficiency of 120 lm/W.
2. Reduce unnecessary lighting operation
The lighting system incorporated microwave motion sensing, light control and timer control to manage lighting operation according to actual workshop conditions.
3. Complete the retrofit as an engineering project
The project required more than product supply. LIKELITE provided lighting design, onsite metering, lighting simulation layouts and project installation support.
Project Scope
The project scope covered the main stages required for the industrial workshop lighting retrofit.
Site Assessment
LIKELITE supported onsite metering and assessment of the existing lighting conditions.
The purpose was to establish the technical basis for the new lighting layout and product configuration.
Lighting and Circuitry Design
The lighting system was designed together with the relevant circuitry requirements to support the retrofit installation.
Lighting Simulation
Project lighting layouts could be prepared using:
DIALux Evo
LitePro DLX
AutoCAD
AGi32
These engineering tools support evaluation of luminaire positioning and light distribution before installation.
LED Lighting Supply
The project used:
600 sets × 120W LIKELITE LED Flood Lights
The selected configuration was designed for broad-area industrial workshop illumination.
Project Installation
LIKELITE included project installation support as part of the lighting solutions service.
LED Flood Light Configuration
The Frankfurt project used a 120W LED Flood Light configuration.
Main Technical Specifications
| Parameter | Specification |
|---|---|
| Input Voltage | AC230V |
| Frequency | 50Hz |
| Power | 120W |
| LED Source | CREE SMD3030 LED |
| Luminous Efficiency | 120 lm/W |
| Beam Angle | 110° |
| IP Rating | IP65 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| Color Temperature | 5000K ± 500K |
| Color Rendering Index | Ra80 |
| Lamp Body | Aluminum Alloy |
| Material | ALU + PC |
| Lifespan | 30,000 hours |
| Working Temperature | -20°C to +45°C |
| Power Supply | AC |
| Certification | GS |
| Warranty | 3 years |
Smart Lighting Control System
A key part of the Frankfurt retrofit was the integration of three control functions:
Microwave Motion Sensor
The microwave motion sensor can detect movement within the controlled area and support automatic lighting operation.
This is particularly applicable to industrial areas where occupancy varies during operating hours.
Light Control
Light control can be used to coordinate lighting operation with available ambient light conditions where the application permits.
Timer Control
Timer control allows lighting operation to follow defined working schedules.
Combined Control Strategy
The project configuration combined:
Microwave Motion Sensor + Light Control + Timer Control
The objective was to avoid unnecessary lighting operation while maintaining lighting availability during required working periods.
Project Implementation
The project followed an engineering-oriented workflow.
01 — Existing Lighting Assessment
Existing lighting conditions and project requirements were reviewed.
↓
02 — Onsite Metering
Onsite lighting information was collected for project design.
↓
03 — Lighting Design
Lighting and circuitry requirements were developed for the retrofit.
↓
04 — Simulation Layout
DIALux Evo / LitePro DLX / AutoCAD / AGi32 layouts could be used for technical evaluation.
↓
05 — Product Confirmation
120W LED Flood Lights and the required control system were confirmed.
↓
06 — Bulk Supply
600 sets of LED Flood Lights were supplied for the project.
↓
07 — Installation
Project installation support was provided.
↓
08 — Lighting Control Commissioning
The microwave motion sensor, light control and timer control system were configured for the project application.
Project Result
According to the project information provided, the Frankfurt industrial workshop lighting upgrade achieved a reported:
30% Energy-Saving Result
The result was supported by two major changes:
LED Efficiency
The project used 120W LED Flood Lights with a stated luminous efficiency of 120 lm/W.
Intelligent Lighting Control
Microwave motion sensing, light control and timer control were incorporated to reduce unnecessary lighting operation.
The reported 30% energy-saving figure should be understood as the project result supplied for this case. Final energy performance for a specific facility depends on operating hours, existing lighting load, occupancy and control settings.
Project Configuration at a Glance
600 sets
120W LED Flood Lights
72,000W
Total nominal connected LED load
120 lm/W
Stated luminaire luminous efficiency
IP65
Outdoor/industrial environmental protection level
10KV
Surge protection
3 Years
Warranty
30%
Reported energy-saving result
Smart Control
Microwave Motion Sensor + Light Control + Timer Control
Engineering Services Provided by LIKELITE
For this industrial lighting project, LIKELITE's project service scope included:
Lighting and Circuitry Design
Technical design support for the lighting system and related circuitry.
Onsite Metering
Onsite measurement to establish existing lighting conditions.
DIALux Evo Layout
Lighting simulation and layout preparation.
LitePro DLX Layout
Additional engineering layout support where required.
AutoCAD Layout
CAD-based project layout support.
AGi32 Layout
Lighting calculation and engineering layout support.
Project Installation
Installation support for project implementation.
Before & After Comparison
DIALux EVO Lighting Simulation Verification
Why This Project Matters
The Frankfurt project demonstrates a complete industrial lighting retrofit model rather than a simple LED product replacement.
The project combined:
Industrial Workshop Application
120W LED Flood Lights
120 lm/W Efficiency
IP65 Protection
GS Certification
Smart Lighting Controls
Lighting Design
Onsite Metering
Simulation Layouts
Project Installation
This project structure is particularly relevant to EPC contractors, engineering companies, industrial facility owners and bulk lighting buyers evaluating an industrial lighting retrofit supplier.
Frankfurt Industrial Lighting Project FAQ
1. Where was this industrial lighting project located?
The project was an industrial workshop lighting upgrade in Frankfurt, Germany.
2. What type of project was it?
It was an existing industrial workshop lighting retrofit, using LED Flood Lights to upgrade the lighting system.
3. How many LED Flood Lights were supplied?
The project used 600 sets of LED Flood Lights.
4. What was the LED Flood Light power?
Each LED Flood Light was rated at 120W.
5. What was the total nominal connected LED load?
600 sets × 120W gives a nominal connected LED load of 72kW.
6. What was the luminous efficiency of the LED Flood Light?
The specified luminaire luminous efficiency was 120 lm/W.
7. What was the beam angle?
The specified beam angle was 110°, providing broad light distribution for the industrial workshop application.
8. What IP rating did the project use?
The LED Flood Light specification was IP65.
9. What certification did the product have?
The project configuration was specified with GS certification.
10. What lighting control system was used?
The project used a combination of Microwave Motion Sensor + Light Control + Timer Control.
11. What was the reported energy-saving result?
The project information reports an energy-saving result of 30%.
12. What warranty was provided?
The specified warranty was 3 years.
13. Did LIKELITE provide lighting design services?
Yes. The service scope included Lighting and Circuitry Design, Onsite Metering, DIALux Evo Layout, LitePro DLX Layout, AutoCAD Layout and AGi32 Layout.
14. Can LIKELITE provide installation support for Industrial Lighting Projects?
Yes. Project Installation was included within the stated lighting solutions service scope.
15. Can LIKELITE provide a similar lighting retrofit for another industrial workshop?
Yes. A similar project can be evaluated based on the facility layout, mounting height, existing lighting system, operating hours, electrical conditions, required illumination and control requirements.
Frankfurt Industrial Workshop Lighting Upgrade — LIKELITE
600 sets | 120W LED Flood Lights | 120 lm/W | IP65 | GS | 3-Year Warranty | Smart Lighting Control | Reported 30% Energy Saving
LIKELITE provides industrial lighting project supply and engineering support for EPC contractors, engineering companies, industrial facility owners, lighting distributors and bulk project buyers.
Industrial Lighting Projects → LED Flood Lights → Industrial Workshop Retrofit → Smart Lighting Control → Engineering Design → Project Installation
