LIKELITE completed a solar road lighting application in Guadalajara, Mexico, using 1,200 sets of 130W LED Solar Roadway Lights.
The project was designed around solar-powered roadway lighting, battery energy storage and intelligent lighting control, providing an alternative to conventional grid-dependent road lighting.
Project at a Glance
Item
Project Data
Project
Guadalajara Solar Road Lighting Upgrade
Location
Guadalajara, Mexico
Product
LED Solar Roadway Lights
Quantity
1,200 sets
Rated Power
130W
Power Supply
Solar
Solar Panel
36V / 130W Mono-Si
Battery
25.6V / 90Ah
Control System
Microwave Motion Sensor + Light Control + Timer Control
Remote Control
Supported
Dimming
Supported
Energy Saving
20%
Certification
NOM / UN38.3
Warranty
2 Years
Brand
LIKELITE
Origin
Guangdong, China
Project Requirement
Solar Road Lighting for a Large-Scale Roadway Application
The Guadalajara project required a solar-powered roadway lighting configuration for a substantial installation of 1,200 lighting sets.
The project configuration needed to integrate four key functions:
LED Road Lighting
Solar Power Generation
Battery Energy Storage
Intelligent Lighting Control
Instead of treating the luminaire as an individual product, LIKELITE supplied the project as a coordinated solar lighting system.
The selected configuration combines a 130W LED roadway light with a 36V / 130W Mono-Si solar panel and a 25.6V / 90Ah battery.
Project Scope
1,200 Sets of LED Solar Roadway Lights
The main project scope covered the supply of:
1,200 sets LED Solar Roadway Lights
130W LED lighting units
36V / 130W Mono-Si solar panels
25.6V / 90Ah batteries
Intelligent control functions
Remote control
Dimming support
Technical lighting design support
The project was configured as a solar-powered roadway lighting application rather than a conventional AC-only street lighting installation.
LED Solar Roadway Light
130W Outdoor Road Lighting
The selected LIKELITE LED Solar Roadway Light uses a 130W LED configuration.
Main Product Data
LED Source: CREE SMD3030 LED
Luminous Efficacy: 130 lm/W
CCT: 5000K ± 500K
CRI: 80
IP Rating: IP66
Body Material: Aluminum Alloy
Shade Material: Glass
Beam Angle: 75° / 140° Cut Out
Operating Temperature: -25°C to +65°C
Product Lifespan: 30,000 Hours
Product Weight: 13.2 kg
The aluminum-alloy housing and IP66 protection are specified for outdoor roadway applications.
Solar Power System
36V / 130W Mono-Si Solar Panel
The project configuration uses a 36V / 130W Mono-Si solar panel.
The panel provides daytime solar energy generation for the lighting system.
25.6V / 90Ah Battery
A 25.6V / 90Ah battery is specified for energy storage.
The stored energy is used to support nighttime operation of the roadway lighting system.
Supplied System Data
Solar Panel: 36V / 130W
Battery: 25.6V / 90Ah
Charging Time: 5–6 Hours
Power Supply: Solar
The actual charging performance depends on solar irradiation, weather, temperature, panel orientation and other site conditions.
Smart Lighting Control
Microwave Motion Sensor + Light Control + Timer Control
The Guadalajara project configuration includes three control functions.
Microwave Motion Sensor
Motion detection can be used to respond to activity around the lighting area.
This provides a control option for roadway environments where traffic or pedestrian activity changes during the night.
Light Control
Light-control functionality can manage lighting operation according to ambient light conditions.
Timer Control
Timer control allows the lighting schedule to be configured according to the required operating period.
Remote Control & Dimming
The supplied specification also supports Remote Control and Dimming.
The combination allows the project lighting operation to be managed according to the configured control strategy.
Project Engineering
Lighting Design Before Installation
For the Guadalajara application, LIKELITE's lighting engineering services can include:
Lighting & Circuitry Design
Onsite Metering
DIALux Evo Layout
Litepro Dlx Layout
AutoCAD Layout
AGi32 Layout
The engineering process is used to coordinate the lighting layout with the actual roadway installation conditions.
DIALux Calculation
DIALux Evo can be used to establish the project lighting model and verify lighting performance.
The project workflow can be organized into the following stages.
01 — Project Data Collection
Review the roadway layout, installation conditions and required lighting performance.
02 — Onsite Metering
Collect relevant dimensions and installation information where required.
03 — Lighting Layout
Develop the lighting arrangement using DIALux Evo and other requested engineering software.
04 — System Configuration
Coordinate the 130W LED luminaire, solar panel, battery and control system.
05 — Product Supply
Supply the specified solar roadway lighting equipment.
06 — Installation
Install the solar lighting equipment according to the approved project layout.
07 — Control Configuration
Configure microwave motion sensing, light control, timer control, remote control and dimming functions as required.
08 — Commissioning
Check lighting operation and control functions after installation.
Project Result
20% Energy-Saving Improvement
The supplied project information reports an energy-saving improvement of 20%.
This result is presented as the project data supplied for the Guadalajara application.
Actual energy performance can vary according to:
Existing lighting system
Daily operating hours
Dimming strategy
Motion-control settings
Solar conditions
Battery operating conditions
Road usage
The project therefore combines energy-saving potential with independent solar power generation and intelligent lighting control.
Certifications & Warranty
Project Compliance
The supplied project information specifies:
NOM / UN38.3
These certifications are included as part of the supplied project/product information.
2-Year Warranty
The Guadalajara application carries a stated 2-year warranty.
Warranty coverage should be confirmed according to the final commercial contract and approved product documentation.
Technical Specification
Project Product Data
Parameter
Specification
Product
LED Solar Roadway Lights
Quantity
1,200 sets
Rated Power
130W
Input Voltage
100–240V AC
System Input Voltage
12.8–25.6V
LED Source
CREE SMD3030 LED
Luminous Efficacy
130 lm/W
Solar Cell
Mono-Si
Solar Panel
36V / 130W
Battery
25.6V / 90Ah
Charge Time
5–6 Hours
Power Supply
Solar
IP Rating
IP66
CCT
5000K ± 500K
CRI
80
Beam Angle
75° / 140° Cut Out
Body Material
Aluminum Alloy
Shade Material
Glass
Remote Control
Supported
Dimming
Supported
Control System
Microwave Motion Sensor + Light Control + Timer Control
Lifespan
30,000 Hours
Working Temperature
-25°C to +65°C
Product Weight
13.2 kg
Certification
NOM / UN38.3
Warranty
2 Years
Brand
LIKELITE
Origin
Guangdong, China
Guadalajara Project Engineering Services
LIKELITE can support solar road lighting Projects with engineering documentation and project services including:
Lighting Design
Lighting & Circuitry Design Onsite Metering
Lighting Simulation
DIALux Evo Litepro Dlx AGi32
Technical Drawings
AutoCAD Layout
Project Support
System configuration Product supply Installation coordination Project installation Commissioning support
The exact service scope is determined according to the project contract and technical requirements.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why This Project Matters
The Guadalajara project demonstrates a practical configuration for a large-scale solar roadway lighting installation:
1,200 sets
130W LED Solar Roadway Lights
36V / 130W Mono-Si Solar Panel
25.6V / 90Ah Battery
Microwave Motion Sensor
Light Control
Timer Control
Remote Control
Dimming
20% Reported Energy-Saving Improvement
The project combines the lighting fixture, solar generation, energy storage and intelligent controls into one roadway lighting application.
FAQ
1. Where is the project located?
The project is located in Guadalajara, Mexico.
2. How many solar roadway lights were supplied?
The project quantity is 1,200 sets.
3. What LED power was used?
The selected LED Solar Roadway Light is rated at 130W.
4. What solar panel was used?
The supplied configuration specifies a 36V / 130W Mono-Si solar panel.
5. What battery was used?
The system uses a 25.6V / 90Ah battery.
6. How long is the stated charging time?
The supplied charging time is 5–6 hours. Actual charging depends on local solar conditions and system operation.
7. What control system was used?
The specified control system combines Microwave Motion Sensor + Light Control + Timer Control.
8. Does the system support remote control?
Yes. Remote Control is specified in the supplied product data.
9. Does the system support dimming?
Yes. The supplied specification indicates that dimming is supported.
10. What energy-saving result was reported?
The supplied project information reports a 20% energy-saving improvement.
11. What is the luminaire protection rating?
The luminaire is specified as IP66.
12. What LED source is used?
The product specification lists CREE SMD3030 LED.
13. What is the specified luminous efficacy?
The stated luminous efficacy is 130 lm/W.
14. Can LIKELITE provide DIALux calculations?
Yes. LIKELITE provides DIALux Evo layout and lighting calculation services.
15. What is the project warranty?
The supplied project information specifies a 2-year warranty.
Request a Solar Lighting Project Proposal
If you are planning a municipal road, rural road, highway access road, residential road or other outdoor solar lighting project, provide the project location, roadway layout, pole spacing, mounting height, required quantity and lighting requirements.
LIKELITE can evaluate the project conditions and prepare the relevant lighting design, solar system configuration and technical proposal.
