Highway Lighting Projects/Arequipa, Peru Highway Lighting Upgrade Project

4,000 Sets of 100W LED Highway Lights for Highway Lighting Renovation

LIKELITE supplied an LED highway lighting solution for a highway lighting upgrade project in Arequipa, Peru, involving 4,000 sets of 100W LED Highway Lights.

The project was focused on replacing or upgrading the existing highway lighting system with a higher-efficiency LED lighting configuration while maintaining suitable roadway lighting performance.

Project Snapshot

Project Overview

Highway Lighting Upgrade in Arequipa

The Arequipa project required a highway lighting upgrade based on a large-volume LED luminaire configuration.

The project supply consisted of:

4,000 × 100W LED Highway Lights

The selected luminaire configuration was designed for outdoor roadway applications, with:

• IP65 protection
• CREE SMD3030 LED
• 125 lm/W nominal luminous efficiency
• 120° beam angle
• 10KV surge protection
• Aluminum alloy housing
• AC220V input
• 5000K ±500K CCT

The project included lighting engineering support covering design, photometric layout and installation-related coordination.

Project Requirements

The project required a lighting system suitable for highway infrastructure operating conditions.

The main project considerations included:

Roadway Lighting

Suitable optical distribution for highway applications.

Energy Efficiency

Reduction of lighting energy consumption through LED replacement.

Outdoor Protection

IP65 protection for outdoor roadway applications.

Electrical Protection

10KV surge protection and 1.5KV voltage resistance.

Large-Scale Supply

A total project quantity of:

4,000 Sets

Engineering Coordination

Lighting and circuitry design, photometric calculation and project installation support.

Project Solution

100W LED Highway Lights

The project used a 100W LED Highway Light configuration.

Optical Configuration

LED Source: CREE SMD3030

Luminous Efficiency: 125 lm/W

Beam Angle: 120°

CCT: 5000K ±500K

CRI: Ra 80

Based on the supplied product efficiency:

100W × 125 lm/W = approximately 12,500 lm

This represents the calculated nominal luminaire output based on the supplied product specification.

It should not be confused with measured roadway illuminance.

Electrical Configuration

The project luminaire was specified for:

Input Voltage: AC220V

Frequency: 60Hz

Power Supply: AC

Surge Protection: 10KV

Voltage Resistance: 1.5KV

Mechanical & Environmental Configuration

Protection

IP65

Housing

Aluminum Alloy

Material

ALU + PC

Operating Temperature

-20°C to +45°C

Rated Lifespan

30,000 Hours

These specifications provide the product basis for outdoor highway lighting applications.

Project Engineering Support

Unlike a standard product supply project, highway lighting upgrades require coordination between the luminaire and the existing roadway infrastructure.

For the supplied project scope, LIKELITE's lighting solution service included:

Lighting & Circuitry Design

Development of the lighting and electrical configuration required for the project.

Onsite Metering

Site measurement support where required.

DIALux Evo Layout

Roadway lighting calculation and layout.

Litepro DLX Layout

Alternative photometric layout support.

AutoCAD Layout

Engineering drawing and roadway layout coordination.

AGi32 Layout

Additional professional lighting calculation support.

Project Installation

Installation support according to the project scope.

Project Engineering Workflow

This workflow belongs to the project execution process, rather than the general Highway Lighting Solutions methodology.

Project Scale

4,000 Sets

The Arequipa project represents a large-volume highway lighting supply.

With:

4,000 × 100W

the connected rated lighting load of the supplied luminaires is:

400 kW

This is a nominal connected load calculation:

4,000 × 100W = 400,000W = 400kW

Actual annual energy consumption depends on operating hours, control strategy and operating conditions.

Energy-Saving Result

The project information supplied for this case reports:

20% Energy Saving

The 20% figure should be understood as the reported project result provided for this case.

Actual energy savings for a highway retrofit depend on:

• Existing luminaire wattage
• Replacement luminaire wattage
• Operating hours
• Lighting control
• Existing electrical losses
• Required lighting performance
• Maintenance conditions

Before & After Comparison

DIALux EVO Lighting Simulation Verification

Project Results

Project Result Statement

4,000 sets of 100W LED Highway Lights were supplied for the Arequipa highway lighting upgrade, with the project case reporting 20% energy savings.

Product Configuration Used in the Project

LED Highway Lights — 100W

Technical Data

Packaging & Logistics

Single Package Size:

56 × 18 × 9 cm

Single Gross Weight:

10 kg

Project Quantity:

4,000 sets

Why This Project Matters

The Arequipa case demonstrates several capabilities relevant to highway lighting buyers:

Large-Volume Supply

4,000 sets

Standardized Product Configuration

100W LED Highway Lights

High Luminous Efficiency

125 lm/W

Outdoor Protection

IP65

Electrical Protection

10KV Surge

Engineering Support

DIALux + AGi32 + AutoCAD + Onsite Metering

Project-Level Application

Highway infrastructure rather than a standalone product order.

Related Project & Product

Highway Lighting Solutions

General engineering methodology for highway and expressway lighting.

LED Highway Lights

Product specifications and configurations for highway lighting applications.

Highway Lighting FAQ

Technical and procurement questions related to highway lighting.

More Highway Lighting Projects

Additional project cases organized by application, country and project scale.

Request a Similar Highway Lighting Project

Planning a highway lighting upgrade?

Send LIKELITE:

• Project location
• Road width
• Number of lanes
• Pole height
• Pole spacing
• Existing luminaire
• Existing wattage
• Required quantity
• CAD drawings
• Lighting requirements

LIKELITE can evaluate the project scope and provide the corresponding LED highway lighting configuration.

Talk to LIKELITE About Your Highway Project

FAQ

1. Where is the Arequipa highway lighting project located?

The project is located in Arequipa, Peru.

2. How many LED highway lights were supplied?

The project quantity is 4,000 sets.

3. What wattage was used?

The project used 100W LED Highway Lights.

4. What is the nominal luminous efficiency?

The supplied product specification is 125 lm/W.

5. What is the calculated nominal lumen output?

100W × 125 lm/W gives approximately 12,500 lm per luminaire.

This is a product-level calculation rather than a measured roadway Lux value.

6. What LED source was used?

The specified LED source is CREE SMD3030.

7. What is the IP rating?

The luminaire is specified as IP65.

8. What surge protection is provided?

The supplied specification includes 10KV surge protection.

9. What certification is specified for the project?

The supplied project information specifies INACAL.

10. What was the reported energy-saving result?

The supplied project data reports 20% energy saving.

11. Can LIKELITE provide DIALux calculations?

Yes. DIALux Evo layout and calculation support can be provided according to project requirements.

12. Can LIKELITE provide onsite metering?

Yes. Onsite metering is included in the available lighting solution service scope where required.

13. What is the warranty period?

The supplied project configuration specifies a 2-year warranty.

14. Can LIKELITE support large highway projects?

Yes. The Arequipa reference case involves 4,000 sets, demonstrating large-volume project supply capability.

15. Can actual Lux, U0 and Ul data be provided?

They should be published when supported by the actual DIALux calculation or field measurement. These values should not be estimated or fabricated.