LIKELITE supplied LED highway lighting for a highway lighting upgrade project in La Plata, Argentina, covering the replacement and modernization of highway lighting infrastructure.

The project was based on a large-scale supply of 6,000 sets of 150W LED Highway Lights, with a specified luminous efficiency of 130 lm/W, IP65 outdoor protection, 10KV surge protection and S-Mark certification.

Project Summary

Project Background

Highway Lighting Upgrade in La Plata

The project was developed for the modernization of an existing highway lighting system in La Plata.

For a highway retrofit, the lighting system must maintain reliable roadway illumination while improving the efficiency and operational performance of the existing infrastructure.

The project required a large-volume LED highway lighting supply suitable for:

• Existing highway infrastructure
• AC220V electrical systems
• Outdoor roadway environments
• Large-scale luminaire replacement
• Long operating hours
• Highway lighting engineering coordination

LIKELITE supplied the specified LED highway lighting configuration for the project.

Project Scope

6,000 Sets of LED Highway Lights

The project quantity was:

6,000 Sets

with each luminaire rated at:

150W

The nominal connected lighting load can therefore be calculated as:

6,000 × 150W = 900,000W

Total Rated Lighting Load: 900kW

This represents the rated connected load of the supplied luminaires. Actual annual electricity consumption depends on operating hours, lighting controls, system losses and operating schedules.

Project Product

150W LED Highway Lights

The project used a 150W LED Highway Lights configuration based on:

CREE SMD3030 LED

with:

130 lm/W Luminous Efficiency

The nominal product-level light output can be calculated as:

150W × 130 lm/W ≈ 19,500 lm

This is a nominal luminaire output calculated from the supplied product specification. It should not be interpreted as measured roadway illuminance.

Project Lighting Configuration

The supplied product configuration included:

Optical System

• LED Source: CREE SMD3030
• Beam Angle: 120°
• CCT: 5000K ±500K
• CRI: Ra 80
• Luminous Efficiency: 130 lm/W

Electrical System

• Input Voltage: AC220V
• Frequency: 50Hz
• Power Supply: AC
• Surge Protection: 10KV
• Voltage Resistance: 1.5KV

Mechanical & Environmental Protection

• IP Rating: IP65
• Material: ALU + PC
• Lamp Body: Aluminum Alloy
• Operating Temperature: -20°C to +45°C
• Rated Lifespan: 30,000 Hours

Engineering Support

From Product Supply to Highway Lighting Engineering

The project was supported by LIKELITE's highway lighting engineering capabilities.

The available project service scope included:

Onsite Metering

Existing roadway conditions can be measured and documented before retrofit implementation.

Lighting & Circuitry Design

The lighting system can be coordinated with the project's electrical infrastructure.

DIALux Evo Layout

Photometric calculations and roadway lighting layouts can be developed based on actual project geometry.

Litepro DLX Layout

Alternative professional lighting layout support is available where required.

AutoCAD Layout

Engineering drawings can be prepared for roadway lighting installation and coordination.

AGi32 Layout

Professional lighting simulation support can be provided for projects requiring AGi32.

Project Installation

Installation support can be incorporated into the project execution process.

Project Engineering Workflow

The La Plata highway lighting application follows a structured engineering process:

Existing Highway
       ↓
Site & Road Data
       ↓
Onsite Metering
       ↓
Lighting Requirements
       ↓
LED Highway Light Selection
       ↓
Photometric Calculation
       ↓
Lighting & Circuitry Design
       ↓
AutoCAD Layout
       ↓
Production & Supply
       ↓
Project Installation
       ↓
Lighting Verification

Energy-Saving Result

20% Reported Energy Saving

The project data indicates:

20% Energy Saving

For an LED highway lighting retrofit, energy savings should be evaluated against the existing lighting system.

The comparison should consider:

• Existing luminaire wattage
• Replacement luminaire wattage
• Operating hours
• Lighting control
• Circuit losses
• Dimming schedule
• Maintenance condition

For this reason, the 20% figure is presented as the supplied project result, while the final measured energy saving for a specific operating period should be verified through actual electricity consumption data.

Before & After Project Structure

Existing Highway Lighting

The retrofit objective was to replace the existing highway lighting configuration with a more efficient LED lighting system.

Typical retrofit evaluation includes:

Existing Luminaire

→ Existing Wattage

→ Existing Operating Cost

→ Existing Maintenance Requirement

→ Existing Lighting Performance

Upgraded LED Highway Lighting

The upgraded configuration supplied by LIKELITE uses:

150W LED Highway Lights

→ 130 lm/W

→ CREE SMD3030

→ IP65

→ 10KV Surge Protection

→ 30,000 Hours Rated Lifespan

→ 2-Year Warranty

The reported project energy-saving result is:

20%

Before & After Comparison

DIALux EVO Lighting Simulation Verification

Project Technical Specification

150W LED Highway Lights

Large-Scale Project Supply

6,000 Sets

The project quantity represents a large-scale highway lighting procurement requirement.

Quantity

6,000 Sets

Power

150W / Set

Total Rated Load

900kW

Single Package

60 × 19 × 10 cm

Single Gross Weight

12 kg

For large infrastructure projects, production planning and shipment scheduling should be coordinated with:

• Project installation schedule
• Site readiness
• Delivery batches
• Storage capacity
• Installation sequence

Why LIKELITE for Highway Lighting Projects?

Project-Based Engineering

LIKELITE supports Highway Lighting Projects from project data collection through product supply and installation coordination.

Large-Volume Supply

The La Plata application covers:

6,000 Sets

Professional Lighting Design

Support includes:

DIALux Evo / Litepro DLX / AGi32

Engineering Drawings

AutoCAD Layout

Site Assessment

Onsite Metering

Electrical Engineering

Lighting & Circuitry Design

Installation

Project Installation Support

Highway Lighting Project Applications

LIKELITE's LED highway lighting products can be applied to:

• Highway retrofit projects
• Expressway lighting upgrades
• Urban highway modernization
• Interchange lighting
• Highway ramps
• Bridge roadway lighting
• New highway construction
• Large-scale roadway LED replacement

Project Delivery Information

Project Location

La Plata, Argentina

Product Origin

Guangdong, China

Brand

LIKELITE

Product

LED Highway Lights

Project Quantity

6,000 Sets

Rated Power

150W

Certification

S-Mark

Warranty

2 Years

Reported Energy Saving

20%

FAQ

1. Where was the LIKELITE highway lighting project located?

The project application was located in La Plata, Argentina.

2. What type of project was it?

It was a highway lighting upgrade / retrofit project.

3. How many LED highway lights were supplied?

The project quantity was:

6,000 sets.

4. What wattage was used?

The project used:

150W LED Highway Lights.

5. What is the luminous efficiency?

The specified luminous efficiency is:

130 lm/W.

6. What is the nominal lumen output?

Based on the supplied specification:

150W × 130 lm/W ≈ 19,500 lm.

This is a nominal product calculation rather than measured roadway Lux.

7. What LED chip is used?

The product uses:

CREE SMD3030 LED.

8. What is the IP rating?

The specified protection rating is:

IP65.

9. What surge protection is provided?

The specified surge protection is:

10KV.

10. What certification does the project use?

The supplied project data specifies:

S-Mark.

11. What is the reported energy saving?

The project data reports:

20% energy saving.

Actual energy savings should be verified using project operating data.

12. What is the warranty period?

The specified warranty is:

2 years.

13. Can LIKELITE provide DIALux calculations?

Yes. LIKELITE supports DIALux Evo lighting layout and calculation for highway lighting applications.

14. Can LIKELITE provide engineering drawings?

Yes. Available engineering support includes:

AutoCAD Layout, Litepro DLX and AGi32.

15. Can LIKELITE support large Highway Lighting Projects?

Yes. The La Plata application itself represents a 6,000-set highway lighting supply, with engineering services covering onsite metering, lighting and circuitry design, lighting calculations, engineering layouts and project installation support.

Start Your Highway Lighting Project

If you are planning a:

Highway Retrofit

Expressway Lighting Upgrade

New Highway Construction

or

Large-Scale LED Roadway Replacement

send LIKELITE the available project information:

• Road drawings
• Pole height
• Pole spacing
• Road width
• Number of lanes
• Existing luminaire specification
• Existing wattage
• Required quantity
• Lighting standard
• Project location

LIKELITE can evaluate the project requirements and develop the corresponding LED highway lighting configuration.

Request a Highway Lighting Project Assessment