3,000 Sets of 80W LED Highway Lights for Highway Infrastructure Upgrade
Project Location: Durban, South Africa Project Type: Highway Lighting Upgrade Product: LED Highway Lights Quantity: 3,000 sets Power: 80W Certification: LOA Warranty: 2 Years Reported Energy Saving: 20%
LIKELITE supplied 3,000 sets of 80W LED Highway Lights for a highway lighting upgrade application in Durban, South Africa.
The project focused on upgrading highway lighting with LED technology while addressing the practical requirements of large-scale roadway lighting infrastructure.
The supplied lighting configuration combines a 120 lm/W nominal luminous efficiency, IP65 outdoor protection, 10KV surge protection and aluminum-alloy construction.
The project was supported by lighting and circuitry design, onsite metering, photometric layout, engineering drawings and project installation services according to the project scope.
Project Overview
Project Information
Details
Location
Durban, South Africa
Project Type
Highway Lighting Upgrade
Product
LED Highway Lights
Quantity
3,000 sets
Luminaire Power
80W
Certification
LOA
Warranty
2 Years
Reported Energy Saving
20%
Input Voltage
AC 230V
Frequency
50Hz
IP Rating
IP65
LED Source
CREE SMD2835
Luminous Efficiency
120 lm/W
Beam Angle
120°
CCT
5000K ±400K
CRI
Ra 80
Surge Protection
10KV
Voltage Resistance
1.5KV
Housing
Aluminum Alloy
Material
ALU + PC
Lifespan
30,000 hours
Operating Temperature
-20°C to +45°C
Power Supply
AC
Origin
Guangdong, China
Brand
LIKELITE
Project Scope
The Durban highway lighting project involved a large-volume LED highway lighting supply together with engineering and installation support.
Main Scope
3,000 Sets LED Highway Lights
Large-scale supply for highway lighting infrastructure.
80W LED Configuration
The selected luminaire configuration provides controlled installed power for roadway lighting applications.
Lighting & Circuitry Design
Lighting and electrical considerations were incorporated according to project requirements.
Onsite Metering
Available for verification of existing site conditions.
Photometric Layout
DIALux Evo, Litepro DLX and AGi32 layouts can be prepared according to project requirements.
AutoCAD Layout
Engineering drawings can be used for project coordination and installation.
Project Installation
Installation support was included within the available project service scope.
Project Lighting Product
80W LED Highway Lights
The project used an 80W LED highway luminaire configured for outdoor roadway applications.
Key Specifications
Power: 80W
LED: CREE SMD2835
Luminous Efficiency: 120 lm/W
IP Rating: IP65
Beam Angle: 120°
CCT: 5000K ±400K
CRI: Ra 80
Surge Protection: 10KV
Input: AC 230V
Frequency: 50Hz
Housing: Aluminum Alloy
Lifespan: 30,000 hours
Certification: LOA
Warranty: 2 Years
Product Output Reference
Based on the supplied product specification:
80W × 120 lm/W = approximately 9,600 lm per luminaire
For 3,000 sets:
3,000 × 9,600 lm = approximately 28.8 million lm nominal total lamp output
These figures are calculated from the stated product luminous efficiency.
They should not be interpreted as measured roadway illumination.
Actual road surface illuminance depends on:
Road width
Pole height
Pole spacing
Luminaire mounting angle
Optical distribution
Road geometry
Installation conditions
Photometric files
Project Engineering
Existing Highway Lighting Assessment
A highway lighting upgrade starts with the existing infrastructure.
Relevant project information may include:
Existing pole positions
Pole height
Pole spacing
Road width
Number of lanes
Existing luminaire type
Existing luminaire power
Existing electrical circuits
Existing lighting arrangement
Where required, onsite metering can be used to verify existing conditions.
Roadway Lighting Calculation
The project engineering workflow can incorporate professional photometric design.
DIALux Evo
Used for roadway lighting modeling and calculation according to project requirements.
Litepro DLX
Available for roadway lighting layout and photometric calculation.
AGi32
Available for Projects requiring AGi32-based lighting analysis.
AutoCAD
Used for roadway, pole and luminaire layout coordination.
The purpose of the calculation is to confirm the relationship between the selected luminaire and the actual roadway geometry.
Project Installation
Large-scale highway lighting replacement requires coordination between the lighting product and existing infrastructure.
Installation planning may consider:
Existing pole condition
Mounting compatibility
Luminaire orientation
Electrical connections
Existing cables
Surge protection
Installation access
Replacement sequence
Site working conditions
The final installation method depends on the actual project site and contractor requirements.
Energy-Saving Result
20% Reported Energy Saving
The project information provided for the Durban application states:
20% Energy Saving
This figure is presented as the reported result of the supplied project case.
The case demonstrates LIKELITE's ability to coordinate large-volume LED highway lighting supply with engineering and project implementation requirements.
Before & After Comparison
DIALux EVO Lighting Simulation Verification
Start Your Highway Lighting Project
For EPC contractors, highway contractors, engineering companies and infrastructure buyers, LIKELITE can evaluate new Highway Lighting Projects based on:
Project location
Road width
Number of lanes
Pole height
Pole spacing
Existing luminaires
Existing wattage
Required quantity
Lighting requirements
CAD drawings
Project schedule
LIKELITE
LED Highway Lighting for Global Road Infrastructure Projects
FAQ
1. Where is the Durban highway lighting project located?
The project is located in Durban, South Africa.
2. What type of project is this?
It is a highway lighting upgrade project using LED highway luminaires.
3. How many LED highway lights are specified?
The project quantity is 3,000 sets.
4. What is the power of the LED highway light?
The specified luminaire power is 80W.
5. What is the luminous efficiency?
The stated luminous efficiency is 120 lm/W.
6. What is the nominal lumen output?
Based on the supplied specification:
80W × 120 lm/W ≈ 9,600 lm per luminaire.
This is a nominal product calculation, not a measured roadway Lux value.
7. What certification is specified?
The project specification lists LOA certification.
8. What is the IP rating?
The luminaire is specified as IP65.
9. Does the luminaire have surge protection?
Yes. The product specification lists 10KV surge protection.
10. What LED source is used?
The specified light source is CREE SMD2835 LED.
11. Can LIKELITE provide DIALux Evo lighting calculations?
Yes. DIALux Evo layout and photometric calculation are available according to project requirements.
12. Can LIKELITE provide onsite metering and AutoCAD drawings?
Yes. Onsite metering and AutoCAD layout services can be included according to the project scope.
13. What is the reported energy-saving result?
The supplied Durban project information reports 20% energy saving.
14. Is the 20% saving guaranteed for all projects?
No. It is presented as the reported result of this project application. Actual energy savings depend on the existing lighting system, operating schedule, LED configuration and control strategy.
