Project Location: Szeged, Hungary Project Type: Highway Lighting Upgrade Product: LED Highway Lights Project Quantity: 7,500 sets Rated Power: 100W Certification: CE / MEEI Warranty: 2 Years Reported Energy Saving: 23%
LIKELITE supplied LED highway lighting Products and project engineering support for a highway lighting upgrade in Szeged, Hungary.
The project involved the replacement and upgrade of highway lighting infrastructure using 100W LED highway lights. The project scope combined product supply with lighting and circuitry design, onsite metering, lighting layout and project installation support.
The completed lighting configuration was designed for large-scale roadway application, with IP66 protection, CREE SMD3030 LED technology, 130 lm/W luminous efficiency and 10KV surge protection.
Project Overview
The Szeged highway lighting upgrade was developed to improve the performance of the existing roadway lighting system while reducing electricity consumption.
Key Project Data
Item
Project Specification
Location
Szeged, Hungary
Application
Highway Lighting
Project Type
Lighting Upgrade
LED Luminaire
LED Highway Lights
Power
100W
Quantity
7,500 sets
Certification
CE / MEEI
Warranty
2 Years
Reported Energy Saving
23%
LED Source
CREE SMD3030
Luminous Efficiency
130 lm/W
Protection
IP66
Surge Protection
10KV
Beam Angle
120°
Input Voltage
AC 100–240V
Frequency
50Hz
Project Requirements
For a large highway lighting upgrade, the project required a lighting system capable of operating reliably in an outdoor roadway environment while maintaining controlled energy consumption.
The main project considerations included:
Existing highway lighting conditions
Roadway illumination requirements
Large-scale luminaire replacement
Electrical compatibility
Outdoor environmental protection
Surge protection
Lighting distribution
Project quantity
Local certification
Installation requirements
Long-term maintenance
Energy-saving performance
The selected LED highway light configuration was developed around these requirements.
Project Lighting Solution
100W LED Highway Lights
LIKELITE supplied a 100W LED highway light configuration using CREE SMD3030 LED technology.
The luminaire was configured with a 130 lm/W luminous efficiency, providing a high-output solution for highway lighting applications while maintaining a relatively low rated power.
The 120° beam angle was selected as part of the project lighting configuration.
The luminaire also incorporated IP66 protection and 10KV surge protection for outdoor roadway applications.
Product Specification
Electrical
Input Voltage: AC 100–240V Power: 100W Power Supply: AC Frequency: 50Hz Voltage Resistance: 1.5KV
Optical
LED Source: CREE SMD3030 LED Luminous Efficiency: 130 lm/W Beam Angle: 120° Color Temperature: 5000K ±400K Color Rendering Index: Ra 80
Mechanical & Environmental
IP Rating: IP66 Material: ALU + PC Lamp Body: Aluminum Alloy Surge Protection: 10KV Working Temperature: -20°C to 45°C Lifespan: 30,000 hours
Commercial
Certification: CE / MEEI Warranty: 2 Years Brand: LIKELITE Origin: Guangdong, China
Project Engineering Services
The Szeged project was not limited to product supply.
LIKELITE's project service scope included:
Lighting and Circuitry Design
Lighting and electrical circuit requirements were incorporated into the project design process.
Onsite Metering
Existing project conditions could be assessed through onsite measurement to support the lighting design and replacement requirements.
DIALux Evo Layout
DIALux Evo was used as one of the available lighting design tools for roadway lighting layout and photometric evaluation.
LitePro DLX Layout
LitePro DLX was also included in the project lighting design workflow where required.
AutoCAD Layout
AutoCAD layouts supported project engineering documentation and roadway lighting arrangement.
AGI32 Layout
AGI32 was available for lighting calculation and design verification where required.
Project Installation
Project installation support was included within the agreed lighting solution service scope.
Project Implementation
01 — Existing Lighting Assessment
The existing highway lighting conditions and project requirements were reviewed before final product configuration.
02 — Site Measurement
Onsite metering supported the confirmation of actual roadway and installation conditions.
03 — Lighting Layout
The highway lighting arrangement was developed according to the project road configuration and luminaire installation requirements.
04 — Photometric Design
Lighting design software including DIALux Evo, LitePro DLX and AGI32 could be used to evaluate the proposed lighting arrangement.
05 — Product Supply
7,500 sets of 100W LED highway lights were supplied for the project.
06 — Installation
The project proceeded with highway luminaire installation according to the agreed installation plan.
Energy-Saving Result
The reported energy-saving improvement for the Szeged highway lighting upgrade was:
23%
The energy-saving result represents the improvement reported for the project lighting upgrade.
Actual energy consumption and savings can vary according to:
Existing luminaire power
Operating hours
Lighting control strategy
Roadway configuration
Installed quantity
Lighting design
Maintenance conditions
For this reason, the 23% figure should be considered a project reference result, rather than a universal saving rate for every highway lighting installation.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why This Project Matters
The Szeged project demonstrates several capabilities relevant to international highway lighting procurement.
Large Project Quantity
The project required 7,500 sets of LED highway lights, demonstrating the ability to support large-volume roadway lighting supply.
European Project Application
The project was located in Szeged, Hungary, providing a European highway lighting project reference.
Product + Engineering Support
The project combined LED highway light supply with lighting design, onsite metering, circuitry design and installation support.
Energy Upgrade
The project reported a 23% energy-saving improvement after the lighting upgrade.
for large-scale outdoor highway lighting application.
Project Supply Information
Product
LED Highway Lights
Quantity
7,500 sets
Individual Package
63 × 18 × 7 cm
Gross Weight
9.55 kg / set
The packaging configuration was established for project shipment and bulk supply requirements.
Project Application
The Szeged reference project demonstrates the use of LIKELITE LED highway lights for:
Highway lighting upgrades
Existing roadway lighting replacement
Large-scale LED conversion
Road infrastructure modernization
Energy-efficiency improvement
European roadway lighting applications
The same product category can be configured for other highway, expressway, motorway, interchange and major roadway Projects according to the actual lighting design requirements.
Project Capability for International Buyers
LIKELITE works with professional project buyers who require more than standard luminaire supply.
Typical project customers include:
EPC Contractors Highway construction and infrastructure upgrade contractors requiring project-based lighting supply.
Engineering Companies Companies responsible for roadway lighting design, technical specifications and product selection.
Road Contractors Contractors managing highway lighting replacement and installation.
Lighting Distributors Distributors supplying LED highway lighting Products for infrastructure projects.
Bulk Project Buyers Purchasers requiring consistent specifications and large-volume supply.
Project Documentation
Depending on project requirements, LIKELITE can provide project-related technical documentation such as:
Product datasheets
Technical specifications
Lighting layouts
DIALux calculation files
AutoCAD drawings
Photometric information
Certification documents
Installation information
Warranty documentation
Packaging specifications
For projects requiring formal engineering submission, documentation can be prepared according to the agreed project specification.
FAQ
1. Where was this highway lighting project located?
The project was located in Szeged, Hungary.
2. What type of project was it?
It was a highway lighting upgrade project involving LED luminaire replacement and roadway lighting improvement.
3. How many LED highway lights were supplied?
The project quantity was 7,500 sets.
4. What was the power of the LED highway lights?
The supplied reference configuration used 100W LED highway lights.
5. What was the reported energy saving?
The project reported a 23% energy-saving improvement.
6. What LED technology was used?
The reference configuration used CREE SMD3030 LED technology.
7. What was the luminous efficiency?
The specified lamp luminous efficiency was 130 lm/W.
8. What was the protection rating?
The LED highway light used an IP66 protection rating.
9. Did the project include lighting design?
Yes. The project service scope included lighting and circuitry design, onsite metering and lighting layout support.
10. Which lighting design software was supported?
The project service scope included DIALux Evo, LitePro DLX and AGI32, together with AutoCAD layout support.
11. What surge protection was specified?
The reference product specification included 10KV surge protection.
12. What certification was provided?
The project specification listed CE / MEEI certification.
13. What was the product warranty?
The reference project product was supplied with a 2-year warranty.
14. Can LIKELITE supply another highway project with similar requirements?
Yes. LIKELITE can review the road layout, lighting requirements, quantity, electrical conditions and local certification requirements and configure a suitable LED highway lighting solution.
15. Can LIKELITE support large-volume highway lighting procurement?
Yes. The Szeged reference involved 7,500 sets, providing a reference for large-volume highway lighting supply.
Request a Similar Highway Lighting Project
If you are planning a highway lighting replacement, LED conversion or roadway lighting upgrade, send LIKELITE:
