Project: Industrial Workshops Lighting Upgrade Location: Gdańsk, Poland Application: Industrial Workshops Product: 150W LED Flood Lights Quantity: 3,500 Sets Energy Saving: 25% Control System: Microwave Motion Sensor + Light Control + Timer Control Warranty: 2 Years
LIKELITE supplied LED Flood Lights and smart lighting controls for an industrial workshop lighting upgrade project in Gdańsk, Poland.
The project included 3,500 sets of 150W LED Flood Lights, combined with Microwave Motion Sensor, Light Control and Timer Control.
The objective was not simply to replace luminaires. The project configuration addressed lighting efficiency, operating schedules, occupancy conditions and control of the industrial workshop lighting system.
Project Overview
The Gdańsk project was an industrial workshop lighting upgrade.
Industrial workshops can include large floor areas, high mounting positions and different levels of occupancy throughout the working day. Conventional lighting systems may continue operating during low-activity periods, resulting in unnecessary energy consumption.
The project used:
150W LED Flood Lights
combined with:
Microwave Motion Sensor + Light Control + Timer Control
The combination was designed to improve lighting efficiency and optimize lighting operation.
Project Data
Item
Project Data
Project Location
Gdańsk, Poland
Application
Industrial Workshops
Project Type
Lighting Upgrade
Product
LED Flood Lights
Rated Power
150W
Quantity
3,500 Sets
Certification
CE / B-MARK
Energy Saving
25%
Control
Microwave Motion Sensor + Light Control + Timer Control
Warranty
2 Years
Brand
LIKELITE
Origin
Guangdong, China
Project Scope
The project covered the upgrade of the industrial workshop lighting system.
LED Lighting Replacement
150W LED Flood Lights were supplied as the primary lighting equipment for the upgrade.
Intelligent Lighting Control
Microwave Motion Sensor, Light Control and Timer Control were integrated into the lighting configuration to manage lighting operation according to activity, ambient light and predefined schedules.
Lighting Engineering
Project support can include:
Lighting And Circuitry Design
Onsite Metering
DIALux Evo Layout
LitePro DLX Layout
AutoCAD Layout
AGi32 Layout
Project Installation
These services support lighting layout development, calculation, circuitry planning and project implementation.
150W LED Flood Lights Used in the Project
The Gdańsk industrial workshop project used LIKELITE 150W LED Flood Lights.
Technical Specification
Parameter
Specification
Product
LED Flood Lights
Power
150W
Input Voltage
AC 180–265V
IP Rating
IP65
LED Source
CREE SMD2835 LED
Beam Angle
120°
Material
ALU + PC
Lamp Body
Aluminum Alloy
Luminous Efficiency
140 lm/W
Surge Protection
10KV
Voltage Resistance
1.5KV
CCT
5000K ±400K
CRI
Ra 80
Lifespan
30,000 Hours
Power Supply
AC
Frequency
50/60Hz
Working Temperature
-20°C to +45°C
Certification
CE / B-MARK
Warranty
2 Years
Brand
LIKELITE
Origin
Guangdong, China
Smart Lighting Control
Smart lighting control was an important part of the project configuration.
Microwave Motion Sensor
Microwave Motion Sensor technology can detect activity within defined areas and control lighting according to the configured operating logic.
This can be useful in industrial areas where occupancy is not continuous.
Light Control
Light Control can be used to manage lighting operation according to ambient light conditions.
Where sufficient natural light is available, unnecessary artificial lighting operation can be reduced.
Timer Control
Timer Control allows lighting operation to follow factory working hours, shifts and predefined schedules.
A typical operating logic can be configured as:
Working Hours → Lighting ON
Low Activity Period → Controlled Lighting
Non-working Hours → Reduced / OFF
Final control parameters should be confirmed according to actual site requirements.
Engineering & Installation
For industrial lighting upgrades, luminaire quantity is only one part of the engineering process.
Building dimensions, mounting height, working areas, existing lighting and electrical conditions can all affect the final lighting design.
LIKELITE can support the project with engineering services including:
Onsite Metering
Site measurements can be used to confirm building dimensions, mounting positions, mounting height and existing lighting conditions.
DIALux Evo Layout
DIALux Evo can be used to simulate luminaire positions and lighting performance.
LitePro DLX Layout
LitePro DLX layouts can be prepared according to project requirements.
AutoCAD Layout
CAD drawings can support luminaire positioning, engineering coordination and installation planning.
AGi32 Layout
AGi32 can be used for lighting calculations and layout verification where required.
Lighting And Circuitry Design
Lighting and circuitry can be designed based on luminaire quantity, power, installation positions and site electrical conditions.
Project Installation
Installation support can include luminaire installation, smart-control deployment, commissioning and project coordination.
Project Result
25% Energy Saving
According to the project information provided, the Gdańsk industrial workshop lighting upgrade achieved:
25% Energy Saving
The reported improvement was associated with two primary factors:
LED Lighting Efficiency
and
Intelligent Lighting Control
The 150W LED Flood Light uses CREE SMD2835 LED technology and has a stated luminous efficiency of 140 lm/W.
Microwave Motion Sensor, Light Control and Timer Control were also used to optimize lighting operation.
The 25% figure is the project-provided energy-saving result. Actual energy savings should be verified through before-and-after electricity measurements and project acceptance records.
Project Configuration
3,500 Sets
The project supply consisted of:
3,500 sets of 150W LED Flood Lights
The nominal connected load based on 3,500 × 150W is:
525 kW
Actual operating power and annual energy consumption depend on operating hours, control settings, actual loading and site conditions.
Project Application
The project configuration can serve as a reference for similar industrial environments, including:
Industrial Workshops
Manufacturing Facilities
Factory Production Areas
Industrial Warehouses
Equipment Areas
Assembly Areas
Maintenance Areas
Industrial Storage Areas
Lighting calculations should be performed again for each new facility because building dimensions, mounting height and lighting requirements vary between projects.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why This Project Matters
The Gdańsk industrial workshop project demonstrates several areas of LIKELITE project capability:
3,500-set bulk supply
150W LED Flood Light configuration
140 lm/W stated luminous efficiency
Smart lighting control
25% stated energy saving
Lighting design and engineering support
Project installation support
Industrial Lighting Projects require coordination between product configuration, lighting design, control systems and project implementation.
1. Where was this industrial lighting project completed?
The project was completed in Gdańsk, Poland, for an industrial workshop application.
2. What product was used in the Gdańsk project?
The project used 150W LED Flood Lights.
3. How many LED Flood Lights were supplied?
The project quantity was 3,500 sets.
4. What was the reported energy-saving result?
The project information reports 25% energy saving.
5. What smart lighting control system was used?
The configuration included:
Microwave Motion Sensor + Light Control + Timer Control
6. What is the luminous efficiency of the project lighting?
The stated luminous efficiency of the 150W LED Flood Light is 140 lm/W.
7. What LED source was used?
The product uses CREE SMD2835 LED.
8. What is the IP rating?
The referenced product has an IP65 rating.
9. What certification does the product have?
The product specification lists CE / B-MARK certification.
10. What is the warranty period?
The project product configuration includes a 2-year warranty.
11. Can LIKELITE provide lighting calculations for similar projects?
Yes. Depending on project requirements, LIKELITE can provide DIALux Evo, LitePro DLX, AutoCAD and AGi32 layouts.
12. Can LIKELITE provide onsite measurement?
Yes. Onsite metering can be provided when project conditions require site-specific measurements.
13. Can LIKELITE provide project installation?
Yes. Project support can include installation, smart-control deployment and commissioning.
14. Can the same 150W configuration be directly used for another factory?
Not necessarily. Luminaire quantity and layout should be recalculated according to building dimensions, mounting height, working areas and target lighting requirements.
Yes. LIKELITE can support European industrial lighting projects with LED Flood Lights, lighting design, smart control, bulk manufacturing and project implementation support.
