Project Location: Ghent, Belgium Application: Industrial Workshops Project Type: Industrial Lighting Upgrade Product: LED Flood Lights Project Quantity: 1,200 sets LED Power: 200W Reported Energy-Saving Improvement: 27% Warranty: 2 Years Brand: LIKELITE Origin: Guangdong, China
Project Overview
This industrial lighting project in Ghent, Belgium involved the upgrade of lighting equipment for industrial workshop applications.
The project used 200W LED Flood Lights with a project quantity of 1,200 sets.
The lighting system combined LED flood lighting with:
Microwave Motion Sensor
Light Control
Timer Control
The project configuration was developed for industrial workshop operating conditions, with attention to lighting coverage, electrical requirements, operating schedules and energy consumption.
The reported project result was a 27% energy-saving improvement.
This figure represents the reported result of this specific application and should not be interpreted as a guaranteed saving level for every industrial lighting project.
Project Scope
The project scope covered the supply and implementation of LED lighting equipment for industrial workshop areas.
The project service scope included:
Lighting and Circuitry Design
Onsite Metering
DIALux Evo Layout
LitePro DLX Layout
AutoCAD Layout
AGI32 Layout
Project Installation
This allowed the lighting product supply to be coordinated with the engineering and installation requirements of the facility.
Project Product
200W LED Flood Lights
The project used a 200W LED Flood Light configuration designed for industrial workshop lighting.
Item
Project Specification
Product
LED Flood Lights
Power
200W
Quantity
1,200 sets
Input Voltage
AC 230V
LED Source
CREE SMD2835 LED
Luminous Efficiency
140 lm/W
Beam Angle
120°
IP Rating
IP65
Surge Protection
10KV
Voltage Resistance
1.5KV
CCT
5000K ±400K
CRI
Ra80
Material
ALU+PC
Lamp Body
Aluminum Alloy
Lifespan
30,000 hours
Power Supply
AC
Frequency
50Hz
Working Temperature
-20°C to 45°C
Warranty
2 Years
Certifications
CE / RoHS / ERP
Brand
LIKELITE
Origin
Guangdong, China
Intelligent Lighting Control
The Ghent industrial workshop application incorporated three control functions:
Microwave Motion Sensor
Motion sensing was used as part of the lighting control configuration for areas where occupancy and movement patterns could be used to manage lighting operation.
Light Control
Light control was included to support lighting operation according to applicable ambient conditions.
Timer Control
Timer control allowed lighting operation to follow defined schedules.
Combined Control
The three functions could be configured as part of the same industrial lighting control strategy:
Motion Detection + Light Control + Timer Control
The final control logic should be configured according to the actual workshop operating schedule, occupancy pattern and safety requirements.
Project Engineering
Before installation, the lighting system could be coordinated with the workshop layout and electrical requirements through the specified engineering services.
Lighting and Circuitry Design
The lighting arrangement and circuitry were developed around the industrial workshop application.
Onsite Metering
Site measurements provided the basic information required for lighting layout and equipment positioning.
DIALux Evo Layout
DIALux Evo was included in the available project lighting calculation workflow for evaluating the proposed lighting arrangement.
LitePro DLX Layout
LitePro DLX could be used for applicable photometric design and layout requirements.
AutoCAD Layout
AutoCAD layouts supported project coordination between lighting positions and the facility structure.
AGI32 Layout
AGI32 was available for applicable lighting calculation and engineering requirements.
Project Installation
The service scope also included project installation support.
Project Execution
The project execution followed a project-oriented workflow rather than a simple product replacement.
Existing Site → Onsite Metering → Lighting Layout → Photometric Calculation → Product Configuration → Control Configuration → LED Supply → Installation
The engineering process was coordinated around the actual industrial workshop application and the required LED lighting configuration.
Project Energy Result
The reported energy-saving improvement for the Ghent reference project was:
27% Energy-Saving Improvement
The result should be evaluated in the context of the specific project.
Energy performance can be affected by:
Existing lighting technology
Existing fixture wattage
LED replacement wattage
Daily operating hours
Workshop occupancy
Lighting control settings
Required illumination level
Number of operating zones
For this reason, LIKELITE does not present the 27% figure as a universal guarantee.
Project Scale
The project quantity was:
1,200 Sets of 200W LED Flood Lights
At this scale, product consistency, technical documentation, packaging, production coordination and project delivery become important procurement considerations.
The project configuration was therefore based on a defined technical specification rather than an individual retail lighting purchase.
Certification and Compliance
The project product configuration included:
CE
RoHS
ERP
These documents can be included in the technical documentation package according to project procurement requirements.
Packaging and Product Information
The specified single-package information was:
Package Size: 23 × 11 × 9 cm
Single Gross Weight: 11.25 kg
For large-volume projects, packaging information can be coordinated with shipment planning and procurement documentation.
Project Documentation
For an engineering project, LIKELITE can provide project-related technical documentation according to the agreed scope, including:
Product Datasheet
Technical Specification
Certification Documents
Photometric Data
DIALux Layout
LitePro DLX Layout
AutoCAD Layout
AGI32 Layout
Installation Information
Warranty Documentation
Packaging Information
Additional project evidence can be added when available.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Project Buyer Profile
This type of industrial lighting project is relevant to:
Industrial EPC Contractors
Electrical Contractors
Industrial Engineering Companies
Factory Owners
Warehouse Operators
Facility Management Companies
Lighting Distributors
Lighting Importers
Bulk Project Buyers
For engineering buyers, the project provides a reference for evaluating product specifications, project quantity, intelligent controls, engineering services and supply capability.
Why This Project Matters to Industrial Lighting Buyers
The Ghent reference project combines several factors relevant to industrial lighting procurement:
1,200 sets Large-volume LED lighting supply.
200W LED Flood Lights Defined industrial lighting configuration.
140 lm/W Specified luminous efficiency.
IP65 Protection level suitable for applicable industrial environments.
10KV Surge Protection Additional electrical protection for the specified configuration.
CE / RoHS / ERP European-market compliance documentation.
Intelligent Control Motion sensor, light control and timer control.
Engineering Support Lighting design, onsite metering, photometric layouts and installation.
27% Reported Energy-Saving Improvement Project-specific reported energy result.
The Solutions page focuses on capability and methodology.
This Projects page focuses on project facts, execution, products, results and evidence.
FAQ — Ghent Industrial Lighting Project
1. Where was this industrial lighting project completed?
The reference project was for an industrial workshop application in Ghent, Belgium.
2. What type of lighting was supplied?
The project used 200W LED Flood Lights.
3. How many LED flood lights were supplied?
The specified project quantity was 1,200 sets.
4. What was the LED luminous efficiency?
The specified luminous efficiency was 140 lm/W.
5. What LED source was used?
The specified LED source was CREE SMD2835 LED.
6. What was the input voltage?
The specified input voltage was AC 230V.
7. What was the IP rating?
The specified IP rating was IP65.
8. What intelligent lighting controls were used?
The control configuration included Microwave Motion Sensor, Light Control and Timer Control.
9. What was the reported energy-saving improvement?
The reported project result was a 27% energy-saving improvement. This is a project-specific result, not a universal guarantee.
10. What certifications were specified?
The project configuration included CE, RoHS and ERP.
11. What was the warranty period?
The specified warranty was 2 years.
12. Did LIKELITE provide lighting design?
The project service scope included Lighting and Circuitry Design and Onsite Metering.
13. Could LIKELITE provide DIALux calculations?
Yes. DIALux Evo Layout was included in the project engineering service scope.
14. Can LIKELITE support large industrial lighting orders?
Yes. The 1,200-set reference demonstrates the type of large-volume industrial LED lighting supply that can be coordinated with engineering requirements.
15. Can LIKELITE provide project installation support?
Yes. Project Installation was included in the specified service scope.
Request a Similar Industrial Lighting Project
If you are planning an industrial workshop, factory, warehouse or production-facility lighting upgrade, send LIKELITE the project location, facility dimensions, installation height, existing lighting information and required quantity.
LIKELITE can evaluate the project requirements and coordinate the appropriate LED lighting products, engineering layouts, intelligent control configuration and project supply.
LIKELITE — Industrial LED Lighting Supply for International Engineering Projects
