LIKELITE supplied LED lighting for an industrial workshop lighting upgrade project in Kampala, Uganda.
The project involved the supply of 1,000 sets of 150W LED Flood Lights for industrial workshop applications.
The selected lighting configuration included:
150W LED Flood Lights
120 lm/W stated luminous efficiency
IP65 protection
PVOC certification
110° beam angle
3 smart lighting control functions
1-year warranty
The smart control configuration consisted of:
Microwave Motion Sensor + Light Control + Timer Control
According to the project information provided, the lighting upgrade achieved a 20% reported energy-saving result.
Project Overview
Project Item
Project Data
Project
Industrial Workshop Lighting Upgrade
Location
Kampala, Uganda
Application
Industrial Workshops
Project Type
LED Lighting Retrofit
Product
LED Flood Lights
Rated Power
150W
Quantity
1,000 sets
Certification
PVOC
IP Rating
IP65
Luminous Efficiency
120 lm/W
Beam Angle
110°
Warranty
1 Year
Reported Energy Saving
20%
Smart Control
Microwave Motion Sensor + Light Control + Timer Control
Brand
LIKELITE
Manufacturing Origin
Guangdong, China
Project Requirement
The Kampala project was developed for the lighting upgrade of industrial workshop areas.
The project required an LED lighting configuration that could provide broad-area illumination while reducing lighting energy consumption and introducing automatic lighting control.
The main project requirements were:
LED Retrofit
Upgrade the existing industrial workshop lighting with LED Flood Lights.
Project-Scale Supply
Supply:
1,000 sets
of LED Flood Lights.
Industrial Protection
Use luminaires with IP65 protection for suitable industrial workshop environments.
Energy Efficiency
Use a 150W LED Flood Light with a stated luminous efficiency of 120 lm/W.
Intelligent Lighting Control
Integrate:
Microwave Motion Sensor + Light Control + Timer Control
Project Engineering Support
Provide lighting design, onsite metering, lighting layout and installation support.
Project Scope
Existing Lighting Assessment
The lighting upgrade required assessment of the existing workshop lighting conditions.
LIKELITE's onsite metering service can be used to collect information such as existing illumination, luminaire configuration and lighting conditions before the retrofit.
This information provides the technical basis for the project lighting layout.
Lighting and Circuitry Design
The project service included:
Lighting and Circuitry Design
The design considered the lighting arrangement together with the project's electrical and control requirements.
Relevant design factors can include:
Luminaire quantity
Luminaire positioning
Lighting zones
Circuit arrangement
Control zones
Installation conditions
Maintenance access
Lighting Simulation
LIKELITE's project service supports several lighting design platforms:
DIALux Evo
LitePro DLX
AutoCAD
AGi32
The layouts can be used to evaluate luminaire positioning and light distribution before installation.
Final lighting performance should be confirmed according to the actual workshop layout and project calculation.
150W LED Flood Light Configuration
The Kampala project used the following LED Flood Light configuration.
Parameter
Project Specification
Product
LED Flood Lights
Rated Power
150W
Input Voltage
AC220-240V
Frequency
50Hz
LED Source
CREE SMD2835 LED
Luminous Efficiency
120 lm/W
Beam Angle
110°
IP Rating
IP65
Surge Protection
10KV
Voltage Resistance
1.5KV
CCT
5000K ± 500K
CRI
Ra80
Material
ALU + PC
Lamp Body
Aluminum Alloy
Lifespan
30,000 Hours
Power Supply
AC
Working Temperature
-20°C to +45°C
Certification
PVOC
Warranty
1 Year
Project Quantity and Connected Load
The project quantity was:
1,000 Sets
Each LED Flood Light was rated at:
150W
Therefore:
1,000 × 150W = 150,000W
The nominal connected LED load was therefore:
150kW
This figure represents the rated connected load of the supplied LED luminaires and does not by itself represent actual site electricity consumption.
Actual energy consumption depends on operating hours, control settings, occupancy and system operation.
Smart Lighting Control System
The Kampala project incorporated:
Microwave Motion Sensor
The microwave motion sensor provides automatic lighting control based on detected movement.
This is particularly relevant to industrial workshops where occupancy can vary between different areas and operating periods.
Light Control
Light control can be used to manage lighting operation according to available ambient conditions where the project application permits.
Timer Control
Timer control allows lighting operation to follow predetermined schedules.
This can be useful for workshops operating according to fixed shifts or defined operating periods.
Integrated Control
The project combined:
Microwave Motion Sensor
Light Control
Timer Control
The objective is to reduce unnecessary lighting operation while maintaining lighting availability during required working periods.
Project Implementation
The project implementation followed an engineering-oriented sequence.
01 — Site Assessment
Review the industrial workshop layout and existing lighting conditions.
02 — Onsite Metering
Collect relevant lighting data from the project site.
03 — Lighting Design
Develop the LED lighting layout and circuitry arrangement.
04 — Simulation
Prepare DIALux Evo, LitePro DLX, AutoCAD or AGi32 layouts as required.
05 — Product Confirmation
Confirm the 150W LED Flood Light configuration and smart control system.
06 — Bulk Supply
Supply:
1,000 sets of LED Flood Lights
07 — Installation
Carry out project installation according to the approved project configuration.
08 — Control Setup
Configure the microwave motion sensor, light control and timer control functions.
Project Result
According to the project information supplied for this case:
20% Reported Energy Saving
The reported result is associated with the LED lighting upgrade and intelligent lighting control configuration.
The project combined:
150W LED Flood Lights
120 lm/W stated luminous efficiency
Microwave Motion Sensor
Light Control
Timer Control
The actual energy-saving performance of an industrial lighting project depends on the existing lighting load, operating hours, occupancy, control settings and final installation configuration.
Therefore, the 20% figure should be presented as the supplied project result, rather than as a universal saving rate for all Industrial Lighting Projects.
Project Data at a Glance
Key Metric
Project Data
Location
Kampala, Uganda
Application
Industrial Workshops
LED Flood Lights
1,000 sets
Power
150W
Nominal Connected Load
150kW
Efficiency
120 lm/W
Beam Angle
110°
IP Rating
IP65
Surge Protection
10KV
Certification
PVOC
Warranty
1 Year
Lifespan
30,000 Hours
Smart Control
3 Functions
Reported Energy Saving
20%
Project Engineering Services
The Kampala industrial lighting project included the following service capabilities:
Lighting and Circuitry Design
Engineering design for lighting arrangement and related circuitry.
Onsite Metering
Site measurement and assessment of existing lighting conditions.
DIALux Evo Layout
Lighting simulation and luminaire positioning.
LitePro DLX Layout
Additional lighting design and calculation support.
AutoCAD Layout
CAD-based project lighting drawings.
AGi32 Layout
Lighting calculation and engineering analysis.
Project Installation
Installation support for implementation of the LED lighting system.
Project Product Details
The project product was supplied under the LIKELITE brand.
Why This Project Matters for Industrial Lighting Buyers
The Kampala case combines several requirements commonly found in industrial lighting retrofit projects:
Industrial Workshop
→ LED Lighting Upgrade
→ 1,000 Sets
→ 150W LED Flood Lights
→ 120 lm/W
→ IP65
→ PVOC
→ Smart Lighting Control
→ 20% Reported Energy Saving
This project structure provides relevant reference information for:
EPC Contractors
Engineering Companies
Industrial Facility Owners
Lighting Distributors
Industrial Project Buyers
Government and Institutional Procurement
Lighting Brands
evaluating industrial lighting upgrades in Uganda and other African markets.
Industrial Lighting Project FAQ
1. Where was the LIKELITE industrial lighting project located?
The project was located in Kampala, Uganda.
2. What type of facility was involved?
The project involved industrial workshops requiring an LED lighting upgrade.
3. What product was used?
The project used LIKELITE LED Flood Lights.
4. What was the power rating of each LED Flood Light?
Each luminaire was rated at 150W.
5. How many LED Flood Lights were supplied?
The project quantity was 1,000 sets.
6. What was the nominal connected load?
1,000 sets × 150W = 150kW nominal connected LED load.
7. What was the stated luminous efficiency?
The supplied specification states 120 lm/W.
8. What was the beam angle?
The specified beam angle was 110°.
9. What IP rating was used?
The LED Flood Light was specified as IP65.
10. What certification was specified?
The project configuration was specified with PVOC certification.
11. What smart lighting controls were used?
The project used:
Microwave Motion Sensor + Light Control + Timer Control.
12. What was the reported energy-saving result?
The supplied project information reports a 20% energy-saving result.
13. What was the warranty period?
The supplied project specification included a 1-year warranty.
14. What engineering services were provided?
The stated service scope included Lighting and Circuitry Design, Onsite Metering, DIALux Evo Layout, LitePro DLX Layout, AutoCAD Layout, AGi32 Layout and Project Installation.
Yes. A new project should be evaluated independently according to the workshop dimensions, mounting height, existing lighting system, operating hours, electrical conditions, environmental requirements and required lighting performance.
