High-Efficiency LED Lighting for Industrial Workshops, Production Areas and Large Indoor Spaces
Industrial facilities require lighting systems that can provide reliable illumination across large working areas while controlling energy consumption, maintenance requirements and operating costs.
LIKELITE Industrial Lighting Solutions are designed for industrial workshops, manufacturing facilities, warehouses, production areas, maintenance buildings and other large-scale commercial and industrial environments.
The solution combines high-efficiency LED Flood Lights, lighting design, onsite measurement, lighting simulation, intelligent control and project installation support.
A 200W LED Flood Light configuration used for an industrial workshop application in Palermo, Italy demonstrates how this solution can be applied to large industrial lighting requirements.
Industrial Lighting Solution Overview
Industrial lighting cannot be evaluated only by the wattage of the luminaire.
A suitable industrial lighting system needs to consider:
Working area dimensions
Mounting height
Luminaire spacing
Required illumination
Light distribution
Working hours
Energy consumption
Maintenance access
Environmental conditions
Lighting controls
Electrical protection
Local certification requirements
LIKELITE therefore approaches industrial lighting as an engineering application rather than a simple lighting product purchase.
| Solution Item | Configuration |
|---|---|
| Application | Industrial Workshops |
| Reference Location | Palermo, Italy |
| Product | LED Flood Lights |
| Rated Power | 200W |
| Quantity Reference | 300 sets |
| Certification | CE / ErP / WEEE / CONAI |
| Luminous Efficiency | 160 lm/W |
| IP Rating | IP65 |
| LED Source | CREE SMD2835 |
| Beam Angle | 120° |
| Surge Protection | 10KV |
| CCT | 5000K ±300K |
| CRI | Ra 80 |
| Warranty | 2 Years |
| Energy Saving | Up to 20% |
| Control | Microwave Motion Sensor + Light Control + Timer Control |
| Operating Temperature | -20°C to +45°C |
Industrial Workshop Lighting Challenges
Industrial workshops often have higher and more complex lighting requirements than standard commercial buildings.
Typical challenges include:
Large floor areas
Large production and workshop spaces require sufficient light coverage without excessive numbers of luminaires.
High mounting positions
When luminaires are installed at higher positions, beam angle and light distribution become important for achieving usable illumination at the working plane.
Long operating hours
Industrial facilities may operate for extended periods. Even a moderate reduction in lighting power can produce significant energy savings over the operating life of the system.
Different working zones
Production areas, storage areas, inspection zones, maintenance areas and circulation paths may require different lighting levels.
Maintenance requirements
Industrial facilities need lighting systems that can operate reliably while minimizing frequent maintenance and replacement.
200W LED Flood Light Solution
For the Palermo industrial workshop application, LIKELITE used a 200W LED Flood Light configuration.
The luminaire provides a specified luminous efficiency of 160 lm/W, combined with a 120° beam angle and IP65 protection.
This configuration is suitable for applications requiring broad-area illumination, including:
Industrial workshops
Manufacturing facilities
Production buildings
Warehouse areas
Maintenance workshops
Equipment areas
Industrial service buildings
Large indoor workspaces
The final wattage and quantity should always be confirmed through project-specific lighting calculations.
High-Efficiency LED Configuration
The 200W LED Flood Light is configured with CREE SMD2835 LED technology and a specified luminous efficiency of 160 lm/W.
Main technical configuration:
Input Voltage: 100–240V AC
Frequency: 50Hz
Power: 200W
LED Source: CREE SMD2835
Luminous Efficiency: 160 lm/W
Beam Angle: 120°
CCT: 5000K ±300K
CRI: Ra 80
IP Rating: IP65
Surge Protection: 10KV
Voltage Resistance: 1.5KV
Material: Aluminum Alloy + PC
Lamp Body: Aluminum Alloy
Lifespan: 30,000 hours
Working Temperature: -20°C to +45°C
Power Supply: AC
The aluminum alloy housing provides structural protection for industrial applications, while the IP65 configuration is suitable for many indoor and semi-outdoor industrial environments.
Lighting Distribution for Industrial Spaces
Industrial lighting performance depends heavily on the relationship between mounting height, spacing and beam angle.
The 120° beam angle of the 200W LED Flood Light provides broad light distribution for large working areas.
However, the same luminaire cannot automatically provide the same result in every workshop.
LIKELITE evaluates:
Mounting height
Fixture spacing
Working-plane height
Building dimensions
Equipment layout
Aisle configuration
Wall and ceiling conditions
Required lighting level
This allows the lighting layout to be developed according to the actual industrial environment.
Lighting Design & Simulation
Before large-scale installation, lighting simulation can be used to evaluate the proposed lighting arrangement.
LIKELITE provides:
Lighting and circuitry design
Onsite metering
DIALux Evo layout
LitePro DLX layout
AutoCAD layout
AGi32 layout
Project installation support
Lighting calculations can evaluate:
Average illuminance
Minimum illuminance
Uniformity
Luminaire spacing
Mounting height
Light distribution
Working-plane illumination
For industrial facilities, these calculations help avoid both insufficient lighting and unnecessary over-lighting.
Intelligent Industrial Lighting Control
Industrial facilities do not always require full lighting output throughout the entire operating period.
The solution can integrate:
Microwave Motion Sensor
Motion detection can support lighting operation according to activity within designated areas.
Light Control
Light-control functions can respond to ambient conditions and help prevent unnecessary operation when sufficient natural light is available.
Timer Control
Timer control can schedule lighting operation according to production hours, working shifts and facility operating requirements.
These functions can be configured according to the actual industrial application.
Energy Efficiency & Operating Cost
The Palermo industrial workshop application targeted an energy-efficiency improvement of approximately 20%.
The potential energy reduction comes from the combined effect of:
High-efficiency LED technology
Appropriate power selection
Intelligent lighting control
Scheduled operation
Reduced unnecessary lighting hours
Actual energy savings depend on the existing lighting system, previous wattage, operating hours, control strategy and local electricity conditions.
For industrial buyers, the correct comparison should therefore consider total operating cost, rather than luminaire purchase price alone.
Industrial Lighting Certification
For the referenced European industrial application, the product configuration includes:
CE
ErP
WEEE
CONAI
Certification and compliance requirements can vary according to the destination country, product configuration and project procurement requirements.
LIKELITE can coordinate the required technical and compliance documentation for international Industrial Lighting Projects.
Industrial Environmental Protection
Industrial workshops may contain dust, moisture, temperature variation and other environmental factors.
The 200W LED Flood Light configuration provides:
IP65 protection
10KV surge protection
1.5KV voltage resistance
Aluminum alloy housing
-20°C to +45°C operating temperature
30,000-hour rated lifespan
The final protection requirement should be determined according to the actual workshop environment.
For facilities with chemical exposure, explosive atmospheres, extreme dust or specialized industrial hazards, the lighting specification should be separately evaluated against the applicable industrial safety requirements.
Engineering Support from Design to Installation
LIKELITE's industrial lighting service can cover the main stages of an industrial lighting application:
1. Site Information
Collect building dimensions, mounting height, existing lighting information and operating requirements.
2. Onsite Measurement
Verify actual site conditions and installation points.
3. Lighting Design
Develop the lighting and circuitry layout.
4. Simulation
Use DIALux Evo, LitePro DLX, AutoCAD or AGi32 according to project requirements.
5. Product Configuration
Select LED power, beam angle, quantity and control functions.
6. Project Installation
Provide installation-related technical support according to the approved project design.
This workflow allows industrial buyers to evaluate the lighting system before committing to large-scale procurement.
Industrial Lighting Applications
LIKELITE Industrial Lighting Solutions can be applied to:
Manufacturing workshops
Industrial workshops
Production facilities
Warehouses
Assembly areas
Maintenance facilities
Equipment workshops
Industrial storage areas
Logistics facilities
Agricultural and utility buildings
Large commercial service areas
Different working areas can be configured with different lighting levels and control strategies.
Industrial Lighting Procurement
For industrial lighting procurement, LIKELITE can support buyers with:
Product specifications
Technical datasheets
Lighting calculations
Lighting layouts
Certification documents
Control-system configuration
Packaging information
Warranty information
Installation guidance
Project technical support
For bulk procurement, product configuration can be reviewed before production to ensure consistency across the complete order.
Packaging & Product Logistics
The referenced 200W LED Flood Light has an individual package size of approximately 23 × 11 × 8 cm, with a gross weight of approximately 9.75 kg per unit.
For bulk industrial lighting orders, packaging and logistics requirements can be reviewed according to shipment quantity, destination and installation schedule.
Why Choose LIKELITE for Industrial Lighting?
Industrial buyers usually need more than a catalogue product.
LIKELITE combines:
LED Lighting Products
Lighting Engineering
Simulation & Layout
Intelligent Control
Certification Support
Project Installation Support
This approach allows the lighting system to be evaluated as an application rather than simply compared by wattage and unit price.
Industrial Lighting Solution Assessment
If you are planning an industrial workshop lighting upgrade, provide LIKELITE with:
Building dimensions
Ceiling or mounting height
Existing lighting configuration
Working area requirements
Operating hours
Number of lighting points
Desired lighting level
Local certification requirements
Control requirements
LIKELITE can then evaluate the application and recommend the appropriate LED lighting configuration and engineering approach.
Industrial Lighting Solutions FAQ
1. What type of facilities are suitable for LIKELITE Industrial Lighting Solutions?
The solution is suitable for industrial workshops, manufacturing facilities, warehouses, production areas, maintenance facilities and other large working spaces.
2. What LED Flood Light power is available for industrial applications?
The referenced industrial configuration uses a 200W LED Flood Light. Final wattage should be determined through project-specific lighting calculations.
3. What is the luminous efficiency of the 200W LED Flood Light?
The specified lamp luminous efficiency is 160 lm/W.
4. What LED source is used?
The referenced configuration uses CREE SMD2835 LED technology.
5. What is the beam angle?
The specified beam angle is 120°.
6. What is the IP rating?
The luminaire is configured with IP65 protection.
7. Does the industrial lighting solution support intelligent controls?
Yes. Microwave Motion Sensor, Light Control and Timer Control can be integrated according to application requirements.
8. Can LIKELITE provide DIALux lighting calculations?
Yes. LIKELITE can provide DIALux Evo layouts as well as LitePro DLX, AutoCAD and AGi32 layouts.
9. What energy savings can industrial LED lighting provide?
The referenced Palermo application targeted approximately 20% energy-efficiency improvement. Actual savings depend on the existing system and operating conditions.
10. What certifications are available for the referenced European configuration?
The referenced configuration includes CE, ErP, WEEE and CONAI requirements.
11. What surge protection does the LED Flood Light provide?
The specified configuration includes 10KV surge protection.
12. What is the warranty period?
The referenced configuration includes a 2-year warranty.
13. Can LIKELITE support bulk industrial lighting procurement?
Yes. LIKELITE supports bulk project procurement and can coordinate product configuration, technical documentation, certification and project engineering requirements.
14. Can LIKELITE support industrial lighting installation?
Yes. Project installation support is included within the available lighting engineering service.
15. What information should be provided for an industrial lighting assessment?
Building dimensions, mounting height, existing lighting, working areas, operating hours, lighting requirements and control requirements are useful starting information.
