LIKELITE provides smart lighting solutions for urban roads, municipal streets, residential roads, commercial districts and other outdoor roadway applications.
Our approach combines high-efficiency LED Street Lights with Microwave Motion Sensor, Light Control and Timer Control, allowing roadway lighting systems to respond to traffic activity, ambient light conditions and predefined operating schedules.
For large-scale municipal and engineering projects, LIKELITE supports the complete lighting engineering process—from lighting design and onsite measurement to DIALux Evo simulation, circuit layout, product supply and project installation.
Typical Solution: 100W LED Street Lights
Reference Quantity: 6,000 sets
Lighting Efficiency: 130 lm/W
Control: Microwave Motion Sensor + Light Control + Timer Control
Ingress Protection: IP66
Surge Protection: 10KV
Warranty: 2 years
Energy Saving: Up to 20% in the referenced Lisbon urban roadway upgrade
Smart Road Lighting Is More Than LED Replacement
Traditional roadway lighting upgrades often focus on replacing conventional lamps with LED fixtures.
A smart lighting solution goes further.
The objective is to coordinate lighting output, operating schedules, traffic activity and ambient conditions so that the lighting system operates according to actual roadway requirements.
LIKELITE's solution architecture is designed around three control layers:
Microwave Motion Sensor
The microwave motion sensor detects movement within the configured detection area.
For roads with changing traffic levels, this allows the lighting system to respond to actual activity instead of maintaining the same lighting condition throughout the entire operating period.
Light Control
Light control responds to ambient lighting conditions.
The system can use daylight conditions as an operating reference, reducing unnecessary operation during periods when sufficient natural light is available.
Timer Control
Timer control establishes predefined operating schedules.
This provides predictable operation for municipal roads and enables lighting strategies to be configured around local traffic patterns, operating hours and project requirements.
The three functions can be integrated into one roadway lighting strategy rather than treated as independent accessories.
Smart Lighting Solution Architecture
LED Fixture + Sensing + Scheduling + Engineering Design
A reliable smart roadway system requires more than a sensor installed on an LED fixture.
LIKELITE approaches the system as an integrated lighting solution:
Roadway Conditions → Onsite Measurement → Lighting Calculation → LED Selection → Control Strategy → Circuit Design → Installation → Commissioning
This engineering sequence helps ensure that the lighting system is selected according to the actual road environment rather than based only on fixture wattage.
Solution Layer 1 — Roadway Assessment
Before fixture selection, the project conditions are evaluated.
Typical inputs include:
Road width
Pole height
Pole spacing
Mounting arrangement
Road classification
Traffic conditions
Existing lighting infrastructure
Required illumination level
Existing electricity consumption
Local environmental conditions
Onsite metering can be used to establish the existing lighting condition and energy consumption baseline.
Solution Layer 2 — Lighting Calculation
LIKELITE supports multiple engineering layout and lighting simulation formats according to project requirements.
Supported services include:
DIALux Evo Layout
LitePro DLX Layout
AutoCAD Layout
AGi32 Layout
Lighting and circuitry design
Onsite metering
The purpose is to verify the proposed lighting arrangement before mass deployment.
For roadway projects, the design can evaluate factors such as:
Illuminance
Uniformity
Pole spacing
Mounting height
Light distribution
Lighting coverage
Fixture quantity
Energy consumption
This creates a direct connection between lighting design and product specification.
100W Smart LED Street Light Solution
For the referenced Lisbon urban roadway upgrade, LIKELITE supplied a 100W LED Street Light configuration designed for smart control applications.
Core Specification
| Parameter | Specification |
|---|---|
| Product | LED Street Lights |
| Rated Power | 100W |
| Quantity | 6,000 sets |
| Input Voltage | AC 100–240V |
| Frequency | 50/60Hz |
| LED Source | Lumileds SMD2835 |
| Luminous Efficiency | 130 lm/W |
| CCT | 5000K ±300K |
| CRI | Ra ≥80 |
| IP Rating | IP66 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| Body Material | Aluminum Alloy |
| Lifespan | 30,000 hours |
| Working Temperature | -20°C to +55°C |
| Power Supply | AC |
| Certification | CE / RoHS |
| Warranty | 2 years |
| Brand | LIKELITE |
| Origin | Guangdong, China |
Intelligent Control Strategy
Microwave Motion Sensor + Light Control + Timer Control
The control configuration is designed for roadway environments where lighting demand changes throughout the night.
Normal Operating Logic
Daytime
Light Control keeps the roadway lighting system inactive when ambient daylight is sufficient.
↓
Scheduled Start
Timer Control activates the lighting system according to the configured operating schedule.
↓
Low Traffic Period
The control strategy can maintain an appropriate reduced operating condition where project requirements permit.
↓
Vehicle / Pedestrian Activity
Microwave Motion Sensor detects movement and enables the configured lighting response.
↓
Return to Scheduled Condition
After the detection period, the system returns to the predefined operating state.
The exact dimming levels, detection range, response time and operating schedule should be configured according to roadway conditions and the selected control hardware.
Energy Efficiency Strategy
Up to 20% Energy Saving in the Referenced Lisbon Upgrade
Energy efficiency is not determined by LED wattage alone.
LIKELITE evaluates the combined effect of:
LED luminous efficiency + operating hours + control strategy + lighting layout + existing system condition
For the Lisbon urban roadway upgrade reference, the solution used:
100W LED Street Lights
130 lm/W luminous efficiency
Microwave Motion Sensor
Light Control
Timer Control
Lighting layout optimization
6,000-set deployment
The referenced project achieved an energy-saving improvement of 20%.
Actual savings vary according to the existing lighting system, operating schedule, traffic conditions, control parameters, electricity tariff and installation environment.
Engineering Services
From Lighting Design to Project Installation
LIKELITE can support projects beyond product supply.
01. Onsite Metering
Existing lighting conditions and electrical consumption can be measured to establish the project baseline.
02. Lighting & Circuitry Design
The lighting system and electrical circuit arrangement are developed according to project requirements.
03. DIALux Evo Layout
Roadway lighting arrangements can be simulated to evaluate fixture positioning and lighting performance.
04. LitePro DLX Layout
Alternative lighting calculation and layout workflows can be supported where required by the project team.
05. AutoCAD Layout
CAD drawings can be prepared for engineering coordination and installation planning.
06. AGi32 Layout
AGi32-based lighting analysis can be supported for projects requiring this calculation environment.
07. Product Configuration
LED street light specifications are selected according to the calculated lighting requirements.
08. Project Installation
LIKELITE can support installation activities according to the agreed project scope.
Smart Lighting for Municipal Roadways
Designed for Different Urban Road Conditions
The same smart lighting strategy can be adapted to different roadway environments.
Urban Main Roads
Higher traffic volumes require stable lighting performance while intelligent control can optimize operation during changing traffic conditions.
Residential Roads
Lighting demand can vary significantly during the night. Scheduled control and motion detection can help avoid unnecessary full-output operation.
Commercial Districts
Operating schedules can be configured around commercial activity and pedestrian movement.
Municipal Roads
For large municipal deployments, standardized products, control strategies and engineering documentation can simplify procurement and project implementation.
Parking & Access Roads
Motion-based control can be particularly useful where traffic activity is intermittent.
Why Engineering Buyers Choose a Solution-Based Approach
One Product Is Not a Complete Smart Lighting Project
For EPC contractors, municipal buyers, engineering companies and lighting distributors, the main challenge is often not finding a 100W LED street light.
The challenge is making sure the product works within the complete project system.
LIKELITE therefore connects:
Product → Lighting Calculation → Control → Electrical Design → Installation
This reduces the gap between product procurement and field implementation.
For large-volume procurement, the solution can also be adapted to project-specific requirements including:
Input voltage
LED configuration
Optical distribution
Surge protection
Housing design
Control interface
Sensor configuration
Dimming requirements
Certification requirements
Packaging and labeling
OEM / ODM requirements
Reference Solution — Lisbon, Portugal
Urban Road Smart Lighting Upgrade
The following reference demonstrates the type of smart roadway lighting configuration LIKELITE can support for European urban infrastructure projects.
Location: Lisbon, Portugal
Application: Urban Road Lighting
Product: LED Street Lights
Power: 100W
Quantity: 6,000 sets
Certification: CE / RoHS
Warranty: 2 years
Energy Saving: 20% improvement
Control System: Microwave Motion Sensor + Light Control + Timer Control
Input: AC 100–240V
Efficiency: 130 lm/W
Protection: IP66 / 10KV Surge
LED: Lumileds SMD2835
CCT: 5000K ±300K
CRI: Ra ≥80
Smart Lighting Solution Workflow
A Practical Engineering Process
Step 1 — Project Requirement
Receive road drawings, pole information, existing lighting data and project specifications.
Step 2 — Site Assessment
Conduct onsite metering where required.
Step 3 — Lighting Calculation
Develop the roadway layout using DIALux Evo, LitePro DLX, AGi32 or other agreed engineering software.
Step 4 — Product Selection
Determine wattage, optics, mounting configuration and control requirements.
Step 5 — Control Configuration
Define motion detection, light-control and timer-control parameters.
Step 6 — Engineering Approval
Provide drawings, calculations and technical documentation for project review.
Step 7 — Production
Manufacture the confirmed configuration according to approved specifications.
Step 8 — Installation & Commissioning
Support installation and system commissioning according to the project scope.
Smart Lighting Solution Applications
LIKELITE smart LED lighting solutions can be configured for:
Urban roads
Municipal streets
Residential roads
Commercial streets
Parking areas
Access roads
Industrial parks
Public facilities
Road intersections
Pedestrian areas
Infrastructure projects
FAQ
1. What is a smart lighting solution?
A smart lighting solution combines LED lighting equipment with sensing, scheduling, control and engineering design to optimize lighting operation according to actual project requirements.
2. What is the difference between Smart Lighting Solutions and Smart Lighting Projects?
Smart Lighting Solutions explains how the lighting system is designed and implemented. Smart Lighting Projects focuses on specific completed project evidence and results.
3. Can LIKELITE provide smart LED street lights for municipal projects?
Yes. LIKELITE supports large-volume LED street lighting projects for municipal, EPC, engineering and infrastructure applications.
4. What smart controls are available?
The referenced solution uses Microwave Motion Sensor, Light Control and Timer Control. Other control configurations can be discussed according to project requirements.
5. Can the motion sensor automatically control the light output?
Yes, where the selected control hardware and fixture configuration support the required dimming function.
6. Can LIKELITE provide DIALux calculations?
Yes. LIKELITE provides DIALux Evo Layout services as part of its lighting engineering support.
7. Does LIKELITE provide AutoCAD drawings?
Yes. AutoCAD Layout can be included where CAD documentation is required for project coordination.
8. What is the efficiency of the 100W LED street light?
The referenced configuration has a lamp luminous efficiency of 130 lm/W.
9. Is the LED street light suitable for European projects?
The referenced configuration uses CE and RoHS certification and AC 100–240V input, making it suitable for projects requiring these specifications, subject to the final project compliance requirements.
10. What is the IP rating?
The referenced LED street light is rated IP66.
11. What surge protection is provided?
The referenced configuration provides 10KV surge protection.
12. What is the expected lifespan?
The stated lifespan is 30,000 hours. Actual service life depends on operating conditions, thermal management, electrical conditions and maintenance.
13. How much energy can smart lighting save?
The referenced Lisbon application achieved a 20% energy-saving improvement. Actual savings depend on the existing system and project operating conditions.
14. Does LIKELITE provide OEM and customized lighting solutions?
Yes. Product specifications, control configuration, housing, optics, labeling and other requirements can be evaluated for OEM/ODM projects.
15. Can LIKELITE support installation?
Project installation support is included among LIKELITE's available lighting solution services, subject to the agreed project scope and location.
Request a Smart Lighting Solution
If you are planning an urban roadway, municipal lighting or large-scale LED street lighting project, send LIKELITE your road drawings, pole arrangement, existing lighting information or project specifications.
LIKELITE can evaluate the application and provide a project-specific:
Lighting Design + DIALux Layout + Product Configuration + Smart Control Strategy + Circuit Design + Installation Support
LIKELITE — Outdoor LED Lighting Solutions for International Engineering Projects
