LIKELITE supplied a stadium lighting upgrade solution for an outdoor sports venue in Krakow, Poland, using 600 sets of 200W LED Stadium Lights.
The project was designed around the requirements of outdoor sports facilities: high-output illumination, weather resistance, structural durability, controlled beam distribution and reliable operation under changing seasonal conditions.
The supplied project configuration uses OSRAM SMD2835 LED, delivers up to 135 lm/W, supports dimming and is rated IP66 / IK09 for demanding outdoor environments.
According to the project information provided, the lighting upgrade achieved an energy-saving improvement of 20%.
The Krakow project required an outdoor lighting configuration capable of operating reliably in a sports environment while maintaining high optical output and manageable energy consumption.
The main engineering considerations included:
High-output LED lighting for outdoor sports areas
Wide 120° beam distribution
Protection against rain, dust and outdoor exposure
Mechanical impact resistance
Stable operation across seasonal temperatures
Dimming capability for different operating conditions
Project-specific lighting and circuitry design
Photometric layout and engineering verification
Installation support
Rather than treating the project as a simple luminaire replacement, LIKELITE's scope covered the lighting design and project implementation process around the supplied LED Stadium Lights.
Installed Lighting Configuration
The project uses 600 sets of 200W LED Stadium Lights.
At the rated power, the installed connected lighting load is approximately 120 kW before operating controls and dimming strategies are considered.
The luminaires use OSRAM SMD2835 LED technology with a stated luminous efficiency of 135 lm/W and a 120° beam angle.
The 200W configuration is intended to provide a high-output lighting option for large outdoor sports areas where both illumination coverage and equipment durability are important.
Key Project Configuration
200W × 600 sets
Total rated connected load: approximately 120 kW
LED source: OSRAM SMD2835
Rated efficiency: 135 lm/W
Beam angle: 120°
Dimming: Yes
Protection: IP66 / IK09
Outdoor Sports Lighting Engineering
Outdoor sports lighting places different demands on luminaires compared with ordinary commercial or roadway lighting.
For this project, the fixture specification combines:
IP66 Protection
The IP66 enclosure rating is specified for protection against dust ingress and powerful water jets, supporting outdoor installation conditions.
IK09 Mechanical Protection
The IK09 rating provides a higher level of mechanical impact resistance for a luminaire installed in an active sports environment.
Dimmable Operation
The project luminaire supports dimming. This allows the lighting system to be configured for different operating conditions rather than maintaining full output at all times.
Wide-Area Optical Distribution
The specified 120° beam angle provides broad light distribution. Final aiming and mounting positions should be determined from the actual venue geometry and photometric calculation.
Engineering Services Included in the Project
LIKELITE's project service scope included the following engineering capabilities:
Lighting and Circuitry Design
Onsite Metering
DIALux Evo Layout
Litepro Dlx Layout
AutoCAD Layout
AGi32 Layout
Project Installation
These services are used to connect the product configuration with actual site conditions, including venue dimensions, mounting positions, existing electrical infrastructure and required lighting distribution.
For a stadium or outdoor sports venue, final lighting performance should be verified against the actual mounting height, aiming angle, fixture spacing, playing area dimensions and applicable project requirements.
Technical Specification
Parameter
Specification
Product
LED Stadium Lights
Rated Power
200W
Input Voltage
AC100-305V
Frequency
50/60Hz
LED Source
OSRAM SMD2835 LED
Luminous Efficiency
135 lm/W
Beam Angle
120°
CCT
5000K ± 500K
CRI
Ra 70
IP Rating
IP66
IK Rating
IK09
Dimming
Yes
Power Factor
PF 0.95
Surge Protection
4KV
Housing
Die-casting aluminum ADC12
Lens
PC lens + glass
Main Material
Aluminum
Lifespan
30,000 hours
Working Temperature
-35°C to 45°C
Product Weight
9.75 kg
Certification
CE / RoHS
Warranty
2 years
Origin
Guangdong, China
Brand
LIKELITE
Project Outcome
The Krakow project used a high-output 200W LED Stadium Light configuration across 600 sets.
Based on the supplied project data:
Energy-saving improvement: 20%
The result demonstrates the potential of replacing an existing outdoor sports lighting installation with a higher-efficiency LED configuration while retaining a high-output lighting format.
Actual annual energy consumption and financial savings depend on the original fixture wattage, operating hours, dimming schedule, electricity tariff and maintenance conditions. These values should be calculated from measured project data rather than estimated from the luminaire specification alone.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why This Krakow Project Matters
For outdoor sports venue owners, contractors and lighting distributors, this case demonstrates a practical project configuration based on:
200W high-output LED lighting
600-set project quantity
135 lm/W stated luminous efficiency
IP66 / IK09 protection
Dimmable operation
CE / RoHS certification
20% reported energy-saving improvement
Engineering design and installation support
This combination makes the project relevant to outdoor sports grounds, stadium facilities, training venues and other large-area sports lighting applications where high-output LED equipment and engineering verification are required.
FAQ
1. Where was this stadium lighting project completed?
The project was for an outdoor sports venue in Krakow, Poland.
2. What type of lighting was used?
The project used LIKELITE 200W LED Stadium Lights.
3. How many LED Stadium Lights were supplied?
The project quantity was 600 sets.
4. What was the reported energy-saving improvement?
The supplied project information reports a 20% energy-saving improvement.
5. What LED source was used?
The luminaires use OSRAM SMD2835 LED.
6. What is the luminous efficiency?
The stated lamp luminous efficiency is 135 lm/W.
7. Are the stadium lights dimmable?
Yes. The supplied specification states that dimming is supported.
8. What is the protection rating?
The luminaire is specified as IP66 with IK09 mechanical impact protection.
9. What input voltage does the light support?
The specified input voltage range is AC100-305V.
10. What beam angle is specified?
The specified beam angle is 120°.
11. What color temperature is used?
The project specification is 5000K ± 500K, with CRI Ra 70.
12. What is the warranty period?
The project specification states a 2-year warranty.
13. Can LIKELITE provide DIALux Evo calculations?
Yes. DIALux Evo Layout is included in the listed project engineering service scope. Final Lux and uniformity results should be based on the actual venue geometry and verified calculation file.
14. Can LIKELITE support onsite measurements and installation?
Yes. Onsite metering and project installation are included in the stated service scope.
15. Can this 200W stadium light be used for other sports venues?
The product can be considered for other outdoor sports applications, but final selection should be based on venue dimensions, mounting height, lighting requirements, aiming positions and project-specific photometric calculations.
Project Conversion
Planning an Outdoor Sports Lighting Upgrade?
Send LIKELITE your existing lighting information, venue dimensions, mounting height, fixture quantity and operating requirements.
LIKELITE can support:
Site Data → Lighting Design → Photometric Layout → Product Configuration → Installation Support
