LIKELITE provides engineered LED Highway Lighting Solutions for highway upgrades, roadway rehabilitation, interchange improvements, tunnels, ramps, bridges, and other large-scale road infrastructure projects.
Our scope covers the complete lighting process from onsite metering and roadway lighting design to DIALux Evo simulation, product selection, compliance documentation, production, and project installation.
For highway projects, the objective is not simply to replace existing lamps with LED fixtures. The lighting system must provide appropriate illumination, uniformity, glare control, electrical protection, environmental resistance, energy efficiency, and long-term operational reliability.
LIKELITE works with EPC contractors, engineering companies, lighting distributors, municipal procurement teams, and infrastructure project owners to develop practical LED highway lighting solutions based on project requirements.
Highway Lighting Engineering Scope
A highway lighting project normally involves multiple technical requirements that must be evaluated together.
Roadway Lighting Assessment
LIKELITE can support onsite assessment and existing-lighting evaluation before equipment selection.
Typical assessment items include:
Existing luminaire type and wattage
Pole height and spacing
Road width and lane configuration
Mounting position
Existing electrical infrastructure
Roadway lighting condition
Required illumination level
Energy consumption
Replacement requirements
Local electrical and lighting standards
The purpose is to establish the technical basis for the LED highway lighting design rather than selecting a luminaire only according to wattage.
Lighting and Circuitry Design
The lighting design considers roadway geometry, mounting conditions, electrical requirements, luminaire performance, and project-specific lighting targets.
LIKELITE can provide:
Lighting and circuitry design
AutoCAD layout
DIALux Evo layout
AGi32 layout
LitePro DLX layout
Product configuration
Installation recommendations
The final configuration can be adjusted according to road classification, pole arrangement, required lighting performance, and local project specifications.
LED Highway Lighting Design Process
01 — Project Requirement Review
Project drawings, road information, existing lighting data, electrical conditions, technical specifications, and applicable regional standards are reviewed before the lighting solution is developed.
02 — Onsite Metering and Existing-System Assessment
Where required, onsite measurements are used to understand the existing lighting installation and establish the baseline for the upgrade.
03 — Roadway Lighting Layout
Pole locations, mounting heights, spacing, road geometry, luminaire orientation, and lighting distribution are incorporated into the roadway layout.
04 — DIALux Evo / AGi32 / LitePro DLX Simulation
Lighting simulation is used to evaluate the proposed configuration before production.
Typical design parameters may include:
Average illuminance
Lighting uniformity
Luminaire spacing
Mounting height
Beam distribution
Roadway geometry
Light loss factors
Energy consumption
05 — Luminaire Configuration
The LED highway light is configured according to the project requirements, including wattage, optical distribution, LED source, driver, surge protection, housing, CCT, and control requirements.
06 — Compliance and Documentation
Applicable certifications and technical documentation are prepared according to the destination market and project specification.
07 — Production and Quality Control
Production follows the approved technical configuration. Product parameters, electrical components, housing, optical system, and functional performance are checked before shipment.
08 — Project Installation
LIKELITE can provide installation guidance and project installation support according to the agreed project scope.
LED Highway Light Configuration
For large-scale roadway projects, luminaire selection should be based on the complete lighting system rather than wattage alone.
A typical LIKELITE LED Highway Light configuration can include:
| Specification | Project Configuration |
|---|---|
| Product | LED Highway Lights |
| Rated Power | 100W |
| Input Voltage | AC230V |
| Frequency | 50Hz |
| LED Source | CREE SMD3030 |
| Luminous Efficiency | 130 lm/W |
| IP Rating | IP66 |
| Beam Angle | 120° |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| CCT | 5000K ±300K |
| CRI | Ra ≥80 |
| Housing | Aluminum Alloy |
| Material | ALU + PC |
| Lifespan | 30,000 hours |
| Working Temperature | -20°C to +45°C |
| Power Supply | AC |
| Warranty | 2 Years |
| Origin | Guangdong, China |
| Brand | LIKELITE |
The final luminaire specification should be confirmed against the lighting calculation, road geometry, local regulations, and project technical requirements.
European Highway Lighting Compliance
For Highway Lighting Projects in European markets, electrical safety, electromagnetic compatibility, energy-related requirements, environmental restrictions, and product conformity must be considered during product selection.
The Brussels highway upgrade reference configuration includes:
CE — LVD 2014/35/EU
CE — EMC 2014/30/EU
CE — ErP 2009/125/EC
RoHS 2011/65/EU
ENEC
Compliance documentation can be incorporated into the technical submittal package for EPC contractors, engineering consultants, distributors, and project procurement teams.
Energy Efficiency for Highway Upgrades
LED highway lighting upgrades can reduce energy consumption while maintaining or improving the required roadway lighting performance.
The Brussels highway lighting upgrade reference achieved an energy-saving improvement of 24% compared with the previous lighting configuration.
For each project, energy performance should be evaluated together with:
Existing luminaire wattage
Operating hours
Number of fixtures
Lighting requirements
LED fixture wattage
Lighting control strategy
Maintenance requirements
Expected operating period
This approach allows the project owner or EPC contractor to evaluate the upgrade based on actual project conditions rather than a general LED energy-saving percentage.
Brussels Highway Lighting Upgrade — Engineering Reference
Belgium Highway Lighting Application
Location: Brussels, Belgium
Application: Highway Lighting Upgrade
Product: LED Highway Lights
Power: 100W
Quantity: 7,000 sets
Protection: IP66
Luminous Efficiency: 130 lm/W
LED: CREE SMD3030
Surge Protection: 10KV
Certification: CE / RoHS / ENEC
Warranty: 2 Years
Energy-Saving Improvement: 24%
The project demonstrates the application of 100W LED highway lighting technology for a large-scale European roadway upgrade.
The engineering approach combines roadway lighting design, simulation, product configuration, European compliance requirements, and project installation support.
Why LIKELITE for Highway Lighting Solutions
Engineering-Oriented Design
LIKELITE supports the project from roadway conditions and lighting requirements rather than treating the luminaire as an isolated product.
Simulation Before Production
DIALux Evo, AGi32, LitePro DLX, and AutoCAD-based layouts can be used to verify the proposed lighting configuration before manufacturing.
European Market Compliance
For European highway projects, LIKELITE can provide product configurations and documentation aligned with applicable CE, RoHS, and ENEC requirements.
Large-Volume Production
The production system is suitable for bulk highway lighting requirements, including projects involving thousands of luminaires.
Project-Based Customization
Wattage, optical distribution, CCT, surge protection, electrical configuration, mounting requirements, and other parameters can be evaluated according to the project specification.
Complete Project Support
The service scope can cover:
Onsite Metering → Lighting Design → Simulation → Product Selection → Technical Documentation → Production → Delivery → Installation Support
Highway Lighting Solution Applications
LIKELITE highway lighting solutions can be applied to:
Motorways
Highways
Expressways
Urban expressways
Highway interchanges
Ramps
Bridges
Road tunnels and approaches
Main arterial roads
Transportation infrastructure
Highway rehabilitation projects
Municipal roadway upgrades
Large-scale LED retrofit projects
Project Delivery for EPC Contractors
For EPC contractors and engineering companies, LIKELITE can organize the lighting supply process around the project's technical documentation and delivery schedule.
Typical documentation may include:
Product datasheets
Technical specifications
Compliance documents
Photometric information
Lighting layouts
DIALux calculation files
Installation instructions
Packaging information
Quality inspection documentation
Warranty documentation
This structure helps integrate LED highway lighting supply into the broader engineering and procurement workflow.
Highway Lighting Solution Workflow
Project Requirement
↓
Onsite Assessment
↓
Roadway Lighting Design
↓
DIALux / AGi32 Simulation
↓
Luminaire Configuration
↓
Technical Approval
↓
Production
↓
Quality Inspection
↓
Delivery
↓
Installation
↓
Project Handover
Frequently Asked Questions
1. What is an LED highway lighting solution?
An LED highway lighting solution combines roadway lighting design, LED luminaires, optical configuration, electrical design, simulation, compliance, installation, and project support to meet the requirements of a highway infrastructure project.
2. Can LIKELITE provide DIALux lighting calculations?
Yes. LIKELITE can provide DIALux Evo layouts and lighting calculation support based on available roadway drawings, pole positions, mounting heights, road dimensions, and project lighting requirements.
3. What software can LIKELITE use for highway lighting design?
Depending on project requirements, LIKELITE can support DIALux Evo, AGi32, LitePro DLX, and AutoCAD layouts.
4. Is a 100W LED highway light suitable for highways?
It depends on road geometry, pole height, pole spacing, mounting arrangement, required illuminance, uniformity, and optical distribution. Wattage alone should not determine the final selection.
5. What IP rating is suitable for highway lighting?
Outdoor highway luminaires generally require strong protection against dust and water. The appropriate IP rating depends on the project environment and specification. The Brussels reference configuration uses IP66.
6. What certifications are available for European highway lighting?
The Brussels reference configuration includes CE requirements covering LVD, EMC and ErP, together with RoHS and ENEC.
7. Can LIKELITE supply 7,000 or more highway lights?
Yes. LIKELITE supports bulk Highway Lighting Projects and can organize production according to project quantity, approved specifications, and delivery requirements.
8. Can the LED highway light be customized?
Yes. Project-specific parameters such as wattage, optical distribution, CCT, electrical configuration, surge protection, mounting requirements, and other technical parameters can be evaluated.
9. How much energy can highway LED lighting save?
Energy savings depend on the existing system, replacement wattage, operating hours, lighting design, and control strategy. The Brussels reference project achieved a 24% energy-saving improvement.
10. Can LIKELITE support onsite installation?
Installation support can be included according to the agreed project scope.
11. What information is required for a highway lighting calculation?
Typical information includes roadway drawings, road width, number of lanes, pole height, pole spacing, mounting position, existing lighting data, project location, and required lighting criteria.
12. Does LIKELITE supply only luminaires or complete highway lighting solutions?
LIKELITE can provide both LED highway luminaires and engineering-oriented lighting solution support, including design, simulation, technical documentation, production, and installation support.
Request a Highway Lighting Solution
Send your roadway drawings, pole layout, project quantity, required wattage, project location, or existing lighting information to LIKELITE.
Our engineering team can evaluate the application and prepare the appropriate LED highway lighting configuration, lighting layout, and technical proposal.
LIKELITE — LED Highway Lighting Solutions for Road Infrastructure Projects.
