LED Roadway Lighting Solutions for Municipal and Urban Roads

LIKELITE provides engineered LED roadway lighting solutions for municipal roads, urban streets, arterial roads, residential roads, commercial areas, industrial roads, public infrastructure, and roadway renovation Projects.

The scope covers the complete lighting process from onsite metering and roadway assessment to lighting and circuitry design, DIALux Evo simulation, luminaire configuration, technical documentation, production, and project installation support.

For roadway renovation projects, LED replacement should be based on the existing road layout, pole arrangement, lighting requirements, electrical conditions, environmental exposure, and local project standards.

LIKELITE works with EPC contractors, engineering companies, municipal procurement departments, lighting distributors, importers, and bulk project buyers to develop practical LED Roadway Lighting Solutions according to project conditions.

Roadway Lighting Engineering Scope

A roadway lighting upgrade normally requires the existing lighting system and proposed LED system to be evaluated together.

Onsite Metering

LIKELITE can support onsite metering and existing-lighting assessment before the final luminaire configuration is confirmed.

Typical assessment information includes:

• Existing luminaire type

• Existing wattage

• Pole height

• Pole spacing

• Road width

• Number of lanes

• Luminaire mounting position

• Existing electrical system

• Roadway lighting condition

• Operating requirements

• Energy consumption

The collected information establishes the engineering basis for the LED roadway lighting design.

Lighting and Circuitry Design

LIKELITE provides lighting and circuitry design based on roadway geometry, pole arrangement, electrical conditions, luminaire characteristics, and project requirements.

The design scope can include:

• Roadway lighting layout

• Luminaire positioning

• Pole spacing evaluation

• Mounting configuration

• Electrical circuitry

• LED luminaire selection

• Lighting distribution

• Project-specific technical requirements

The objective is to achieve the required roadway lighting performance while maintaining an appropriate and practical installation configuration.

Roadway Lighting Design Process

01 — Project Requirement Review

The project location, roadway drawings, existing lighting data, technical specifications, electrical conditions, and applicable standards are reviewed before the solution is finalized.

02 — Existing Lighting Assessment

Existing luminaires, pole positions, mounting heights, road dimensions, and electrical conditions are evaluated where project information is available.

03 — Roadway Lighting Layout

The roadway geometry and pole arrangement are incorporated into the lighting layout.

The design considers:

• Road width

• Lane arrangement

• Pole spacing

• Mounting height

• Luminaire orientation

• Beam distribution

• Required lighting criteria

04 — Lighting Simulation

LIKELITE can support:

• DIALux Evo Layout

• LitePro DLX Layout

• AGi32 Layout

• AutoCAD Layout

Lighting simulation can be used to verify the proposed luminaire configuration before production.

05 — LED Roadway Light Configuration

The luminaire is configured according to the project requirements, including:

• Wattage

• LED source

• Optical distribution

• CCT

• Electrical input

• Surge protection

• Housing

• IP protection

• Mounting configuration

06 — Technical Documentation

Product datasheets, photometric information, technical specifications, certification documents, lighting layouts, and other required project documents can be prepared according to the procurement requirements.

07 — Production and Quality Control

After technical approval, production follows the confirmed project specification.

Product structure, electrical components, optical system, housing, and functional performance are checked during the production and inspection process.

08 — Project Installation

Installation guidance and project installation support can be provided according to the agreed scope.

LED Roadway Lights — Typical Project Configuration

The following configuration was used as an engineering reference for a roadway lighting upgrade in Sharm El Sheikh, Egypt.

The final specification should be determined according to the actual roadway layout, lighting calculation, environmental conditions, electrical requirements, and applicable project standards.

Roadway Lighting for Hot and Outdoor Environments

Roadway luminaires installed in outdoor environments must withstand exposure to dust, water, temperature changes, and continuous operation.

The reference configuration for the Sharm El Sheikh roadway upgrade included:

IP66 protection

Aluminum Alloy housing

10KV surge protection

-20°C to +45°C working temperature

AC220V input

These specifications provide a technical configuration suitable for evaluation in demanding outdoor roadway applications.

The final product selection should always be confirmed against the actual environmental and electrical conditions of the project.

Energy Efficiency for Roadway Lighting Upgrades

LED roadway lighting upgrades are normally evaluated against the existing lighting system rather than by using a fixed energy-saving percentage.

The energy performance depends on:

• Existing luminaire wattage

• Replacement LED wattage

• Number of luminaires

• Operating hours

• Lighting requirements

• Lighting control

• Maintenance requirements

• Existing electrical conditions

For the Sharm El Sheikh roadway lighting upgrade reference, the reported energy-saving improvement was:

26%

The 26% improvement applies to this specific project reference and should not be interpreted as a guaranteed saving percentage for every roadway lighting retrofit.

For a new project, LIKELITE can evaluate the existing system and proposed LED configuration to establish a project-specific energy assessment.

Egypt Roadway Lighting Application Reference

Sharm El Sheikh Roadway Lighting Upgrade

Location: Sharm El Sheikh, Egypt
Application: Roadway Lighting Upgrade
Product: LED Roadway Lights
Rated Power: 100W
Quantity: 5,000 sets
Input Voltage: AC220V
IP Rating: IP66
LED: CREE SMD3030
Luminous Efficiency: 130 lm/W
Surge Protection: 10KV
Certification: COC
Warranty: 2 Years
Energy-Saving Improvement: 26%

This application demonstrates the use of a 100W LED Roadway Light configuration for a large-scale roadway renovation project in Egypt.

The reference is included to demonstrate how LIKELITE's roadway lighting Products can be integrated into a project-based engineering process.

Roadway Lighting Applications

LIKELITE LED Roadway Lighting Solutions can be applied to:

• Municipal roads

• Urban streets

• Main roads

• Arterial roads

• Secondary roads

• Residential streets

• Commercial roads

• Industrial roads

• Parking access roads

• Public infrastructure roads

• Roadway rehabilitation

• Municipal LED retrofit projects

• Existing street light replacement

• Large-scale roadway upgrades

Roadway Lighting Solutions for EPC Contractors

For EPC contractors and engineering companies, roadway lighting supply must integrate with the wider project design and procurement process.

LIKELITE can support technical documentation including:

• Product Datasheets

• Technical Specifications

• Photometric Data

• DIALux Evo Layout

• AGi32 Layout

• LitePro DLX Layout

• AutoCAD Layout

• Certification Documents

• Installation Instructions

• Quality Inspection Documents

• Warranty Documents

• Packaging Information

The documentation package can be adjusted according to the project tender requirements and procurement process.

Bulk Roadway Lighting Supply

Large municipal roadway projects often require thousands of luminaires with consistent technical specifications.

The Sharm El Sheikh reference involved:

5,000 Sets

For bulk roadway lighting projects, LIKELITE can coordinate:

Technical Review → Product Configuration → Sample Approval → Production → Quality Inspection → Packaging → Shipment

The production specification is maintained according to the approved project configuration.

Packaging and Logistics

The reference LED Roadway Light configuration included:

Single Package Size: 56 × 17 × 7 cm

Single Gross Weight: 8.35 kg

Packaging information can be used for:

• Container loading

• Shipping planning

• Warehouse handling

• Project-site logistics

• Installation planning

For large-volume procurement, packaging and shipment planning can be coordinated with the production schedule.

Roadway Lighting Solution Workflow

Project Requirement

↓

Existing Lighting Assessment

↓

Onsite Metering

↓

Roadway Lighting Design

↓

DIALux / AGi32 Simulation

↓

LED Roadway Light Configuration

↓

Technical Approval

↓

Production

↓

Quality Inspection

↓

Delivery

↓

Installation

↓

Project Handover

Why Choose LIKELITE for Roadway Lighting

Engineering-Based Product Selection

LIKELITE evaluates LED Roadway Lights according to the project conditions rather than selecting Products only by wattage.

Lighting Simulation Support

DIALux Evo, AGi32, LitePro DLX, and AutoCAD layouts can be used according to project requirements.

Project-Based Configuration

Wattage, optical distribution, CCT, surge protection, electrical input, IP protection, and mounting requirements can be evaluated for individual projects.

Bulk Project Supply

LIKELITE supports large-volume roadway lighting procurement, including projects involving thousands of LED Roadway Lights.

Technical Documentation

Product and project documentation can be prepared for EPC contractors, engineering companies, distributors, and procurement departments.

Installation Support

Installation guidance and project installation services can be included according to the agreed project scope.

Roadway Lighting Solutions FAQ

1. What is a roadway lighting solution?

A roadway lighting solution combines LED roadway luminaires, lighting design, optical configuration, electrical requirements, simulation, technical documentation, installation, and project support for a specific road infrastructure application.

2. What types of roads can LIKELITE illuminate?

LIKELITE solutions can be used for municipal roads, urban streets, arterial roads, residential roads, commercial roads, industrial roads, and roadway rehabilitation projects.

3. Can LIKELITE provide DIALux Evo calculations?

Yes. DIALux Evo layouts and lighting calculations can be provided according to available roadway drawings and project requirements.

4. Can LIKELITE provide AGi32 and LitePro DLX layouts?

Yes. AGi32 and LitePro DLX layouts can be supported together with AutoCAD roadway layouts where required.

5. Is 100W suitable for roadway lighting?

It depends on road width, pole height, pole spacing, mounting arrangement, required lighting criteria, and optical distribution. The correct wattage should be determined through project-specific evaluation.

6. What IP rating is available for outdoor roadway lights?

The Sharm El Sheikh reference configuration uses IP66 protection. The appropriate IP rating should be confirmed according to the project environment.

7. How much energy can LED roadway lighting save?

Energy savings depend on the existing system and proposed replacement configuration. The Sharm El Sheikh reference recorded a 26% energy-saving improvement.

8. Can LIKELITE supply 5,000 sets for one roadway project?

Yes. The Sharm El Sheikh reference involved 5,000 sets of LED Roadway Lights.

9. Can LED Roadway Lights be customized?

Yes. Project requirements such as wattage, beam distribution, CCT, electrical input, surge protection, IP rating, and mounting conditions can be evaluated.

10. What certification was used for the Egypt reference project?

The reference configuration included COC certification. Actual certification requirements should be confirmed according to the destination country and project specification.

11. What information is required for a roadway lighting design?

Typical information includes roadway drawings, road width, lane configuration, pole height, pole spacing, mounting position, existing luminaire information, project location, and required lighting criteria.

12. Can LIKELITE support large municipal roadway projects?

Yes. LIKELITE supports bulk roadway lighting procurement and project-based technical services.

13. Can LIKELITE provide onsite metering?

Yes. Onsite metering and existing lighting assessment can be included according to the project scope.

14. Does LIKELITE provide installation support?

Yes. Installation guidance and project installation support can be included according to the agreed scope.

15. How can I request a roadway lighting proposal?

Send LIKELITE the roadway drawings, existing lighting information, project quantity, project location, technical specifications, and required lighting criteria. The engineering team can then evaluate the appropriate LED Roadway Lighting configuration and project requirements.

Request a Roadway Lighting Solution

For municipal roadway upgrades, urban street lighting projects, LED retrofit projects, or large-scale roadway rehabilitation, send LIKELITE:

Roadway Drawings + Existing Lighting Data + Pole Layout + Project Quantity + Project Location + Technical Requirements

LIKELITE can provide project-specific LED Roadway Light configuration, lighting design support, simulation, technical documentation, and quotation.

LIKELITE — LED Roadway Lighting Solutions for Municipal and Infrastructure Projects.