Project Location: Abu Halifa, Kuwait Project Type: Municipal Road Lighting Upgrade Application: Urban / Municipal Roadway Lighting Product:LED Street Lights Quantity: 1,500 sets Power: 100W Certification: KUCAS Warranty: 2 Years Energy-Saving Target: 22% Lighting Control: Microwave Motion Sensor + Light Control + Timer Control
Project Overview
The Abu Halifa municipal road lighting upgrade in Kuwait was configured around the replacement of existing roadway lighting with a more efficient LED lighting system and an intelligent lighting control strategy.
with IP65 outdoor protection and 10KV surge protection.
The project also incorporates:
Microwave Motion Sensor + Light Control + Timer Control
to provide a more flexible operating strategy for municipal roadway lighting.
The project scope extends beyond LED fixture supply and includes lighting design, onsite metering, lighting simulation, electrical layout, and project installation support.
Project at a Glance
Project Item
Project Specification
Location
Abu Halifa, Kuwait
Project Type
Municipal Road Lighting Upgrade
Product
LED Street Lights
Quantity
1,500 sets
Power
100W
Certification
KUCAS
Input Voltage
AC240V
Frequency
50Hz
IP Rating
IP65
LED Source
Lumileds SMD3030
Luminous Efficiency
120 lm/W
Beam Angle
120°
CCT
5000K ± 400K
CRI
Ra 80
Material
ALU + PC
Housing
Aluminum Alloy
Surge Protection
10KV
Voltage Resistance
1.5KV
Lifespan
30,000 Hours
Power Supply
AC
Operating Temperature
-20°C to +45°C
Warranty
2 Years
Intelligent Control
Microwave Motion Sensor + Light Control + Timer Control
Energy-Saving Target
22%
Project Scope
The project combines four main areas:
LED Roadway Lighting Replacement
Existing municipal roadway lighting is upgraded using 100W LED Street Lights.
Lighting Engineering
The project includes professional lighting and electrical engineering support.
Intelligent Lighting Control
The control system combines:
Microwave Motion Sensor + Light Control + Timer Control
Installation Support
Project installation is included within the agreed project scope.
This makes the project a complete roadway lighting upgrade rather than a simple fixture purchasing program.
LED Street Light Configuration
100W LIKELITE LED Street Light
The project uses a 100W LED roadway lighting configuration with a specified luminous efficiency of 120 lm/W.
LED & Optical System
LED Source: Lumileds SMD3030 Luminous Efficiency: 120 lm/W Beam Angle: 120° Color Temperature: 5000K ± 400K CRI: Ra 80
The configuration is intended for municipal outdoor roadway lighting applications.
Electrical Configuration
The fixture is configured for:
Input Voltage: AC240V Frequency: 50Hz Power Supply: AC
The project specification also includes:
10KV Surge Protection
and:
1.5KV Voltage Resistance
These specifications are part of the electrical protection configuration for the project.
Outdoor Protection
The project fixture uses:
IP65
protection.
The housing is specified as:
Aluminum Alloy
with:
PC
optical material.
The operating temperature range is:
-20°C to +45°C
for the specified fixture configuration.
Intelligent Lighting Control
The Abu Halifa project incorporates three control functions.
Microwave Motion Sensor
The microwave motion sensor provides movement-based detection within the configured detection area.
For municipal roads with changing nighttime traffic activity, motion-based control can be used as part of the operating strategy.
Light Control
Light-control functionality allows the lighting system to respond to ambient-light conditions.
This can help control when the roadway lighting system starts or stops operation.
Timer Control
Timer control allows the municipal lighting schedule to be configured according to the required operating period.
Combined Control Strategy
Microwave Motion Sensor + Light Control + Timer Control
The combined control architecture provides greater flexibility than a simple fixed-time ON/OFF system.
The final control parameters should be configured according to the actual road conditions, traffic pattern, operating hours, and municipal requirements.
Engineering Services
The project includes a range of lighting engineering services.
Onsite Metering
Existing roadway lighting conditions can be measured and reviewed before final design.
Typical information includes:
Existing fixture type
Existing fixture wattage
Pole height
Pole spacing
Road width
Electrical supply
Existing operating schedule
Lighting & Circuitry Design
Lighting layouts and electrical circuitry can be coordinated with the roadway and existing electrical infrastructure.
DIALux Evo Layout
DIALux Evo can be used to model the roadway and evaluate the proposed lighting arrangement.
Typical calculation work may include:
Fixture positioning
Mounting height
Roadway geometry
Lighting distribution
Calculation grid
Actual project calculation results should be published only when verified project documents are available.
Litepro DLX Layout
Litepro DLX layout support is available according to project engineering requirements.
AutoCAD Layout
AutoCAD drawings can be used for:
Lighting layout
Circuitry layout
Engineering coordination
Installation documentation
AGi32 Layout
AGi32 lighting calculations and layouts can be provided where required by the project workflow.
Project Installation
Installation support can be provided according to the agreed project scope and approved engineering documentation.
Project Implementation
STEP 01 — Existing Lighting Review
The existing roadway lighting conditions are reviewed before finalizing the replacement configuration.
Key project information includes:
Existing Fixtures Pole Height Pole Spacing Road Width Electrical Supply Operating Hours Existing Control System
STEP 02 — Lighting Design
The roadway geometry and lighting conditions are translated into an engineering lighting layout.
The LED Street Light configuration is evaluated according to:
