LIKELITE supplies LED street lighting products and engineering support for municipal roadway upgrades, urban infrastructure projects and large-scale public lighting programs.
Our project experience covers LED street light supply, lighting design, photometric simulation, intelligent lighting controls, bulk production and project installation support.
For EPC contractors, municipal procurement teams and engineering companies, project references provide a practical way to evaluate a lighting supplier's product capability, engineering support and large-volume delivery experience.
Prague Municipal Road Lighting Upgrade
Czech Republic | Prague
Project Type: Municipal Road Lighting Upgrade Product:LED Street Lights Application: Urban / Municipal Roads Quantity: 8,500 sets Rated Power: 100W Certification: CE Warranty: 2 years Reported Energy-Saving Improvement: 20% Intelligent Control: Microwave Motion Sensor + Light Control + Timer Control
The Prague reference project involved the application of LED street lighting for a large-scale municipal roadway upgrade.
A total of 8,500 sets of 100W LED Street Lights were specified for the project, together with an intelligent lighting control configuration combining microwave motion sensing, ambient-light control and timer control.
The project configuration was designed around European electrical conditions, with a 207–253V AC input range and 50Hz operating frequency.
Large municipal roadway projects require consistent product configuration, production capacity and technical coordination.
For the Prague reference project, the required quantity was 8,500 LED street lights.
The project configuration combined:
100W LED Street Lights + IP66 Outdoor Protection + 130 lm/W Luminous Efficiency + 10KV Surge Protection + Intelligent Lighting Control
This configuration provides a project-level framework for replacing conventional roadway lighting while introducing a more flexible lighting control strategy.
Intelligent Lighting Control
The Prague project incorporated three control functions:
Microwave Motion Sensor
Microwave sensing can detect movement from vehicles or pedestrians and provide a signal for dynamic lighting operation.
Light Control
Ambient-light control can be used to manage automatic lighting operation according to surrounding light conditions.
Timer Control
Timer control allows lighting schedules to be configured according to the operating requirements of the municipal road.
The purpose is to reduce unnecessary lighting operation while maintaining appropriate roadway lighting during required periods.
LED Street Light Configuration
The project used a 100W LED street light configuration with Lumileds SMD2835 LED technology.
Optical & Electrical Configuration
100W
130 lm/W
Lumileds SMD2835
120° Beam Angle
207–253V AC
50Hz
10KV Surge Protection
1.5KV Voltage Resistance
This configuration was selected for the reference municipal roadway application.
Final lighting performance in any new project should be verified through project-specific photometric calculations based on actual road geometry, pole height, pole spacing and required lighting criteria.
Outdoor Protection for Municipal Roads
Municipal street lights operate continuously in outdoor environments and must withstand changing weather conditions and electrical disturbances.
The reference configuration provides:
IP66
The IP66 enclosure rating is designed for outdoor roadway lighting applications where protection against dust and water ingress is required.
10KV Surge Protection
The lighting configuration includes 10KV surge protection to improve protection against electrical surge events.
Aluminum Alloy Housing
The aluminum alloy lamp body provides the mechanical structure required for outdoor municipal lighting applications.
Operating Temperature
The reference configuration is specified for:
-20°C to +45°C
Lighting Engineering Support
The Prague reference project was supported by a broader lighting engineering service scope.
LIKELITE can support municipal and EPC project teams with:
Onsite metering
Lighting and circuitry design
DIALux Evo layouts
LITESTAR / DLX layouts
AutoCAD layouts
AGi32 layouts
Product configuration
Project installation support
The engineering process can begin with project site data and proceed through lighting design, product configuration and installation.
Project Engineering Workflow
01 — Project Data
Road geometry, pole arrangement, existing lighting and electrical conditions are collected.
02 — Lighting Analysis
The roadway is evaluated according to the project's lighting requirements.
03 — Photometric Design
A lighting layout can be developed using DIALux Evo, LITESTAR, AutoCAD or AGi32.
04 — Product Configuration
LED power, optical distribution, electrical parameters, protection and control functions are confirmed.
05 — Technical Approval
Product specifications and lighting calculations are submitted for project review.
06 — Bulk Production
The approved configuration is manufactured according to project requirements.
07 — Delivery
The required quantity is prepared for project deployment.
08 — Installation Support
LIKELITE can provide project installation support according to the agreed scope.
Project Performance Reference
20% Energy-Saving Improvement
The Prague project reference reports a 20% energy-saving improvement.
For municipal lighting upgrades, energy performance depends on multiple factors, including:
Existing lamp technology
Existing wattage
Operating schedule
LED output
Lighting control strategy
Roadway lighting requirements
Traffic conditions
The 20% figure should therefore be treated as the reported project reference result rather than a universal performance guarantee for every municipal project.
For new projects, LIKELITE recommends calculating the expected energy consumption using actual operating conditions and the proposed lighting-control strategy.
Project Evidence
Prague Municipal Road Lighting Upgrade
Project: Municipal Road Lighting Upgrade Location: Prague, Czech Republic Quantity: 8,500 sets Product: 100W LED Street Lights Control: Microwave Motion Sensor + Light Control + Timer Control Certification: CE Warranty: 2 years
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why This Project Matters to EPC Contractors
For an EPC contractor, a municipal lighting supplier needs to demonstrate more than product specifications.
The Prague reference demonstrates four commercially important capabilities:
Large-Volume Supply
8,500 sets provides evidence of experience with large municipal lighting quantities.
European Electrical Configuration
The project configuration uses:
207–253V AC / 50Hz / CE
Intelligent Lighting
The project combines:
Motion Sensor + Light Control + Timer Control
Engineering Support
Lighting design and project engineering support can be incorporated into the supply process.
Project Applications
LIKELITE municipal lighting project experience can support applications including:
Urban roadway upgrades
Municipal street lighting replacement
Public infrastructure renovation
Smart street lighting
Energy-saving lighting upgrades
Residential road lighting
City road modernization
Large-scale LED retrofit programs
The final product and lighting configuration should always be determined from project-specific engineering requirements.
Municipal Lighting Project Procurement
For EPC contractors and municipal procurement teams evaluating suppliers, LIKELITE can provide project documentation including:
Product datasheets
Technical specifications
Photometric files
Lighting calculations
CAD drawings
Certification documents
Samples
Production information
Installation guidance
Warranty documentation
Project documentation can be prepared according to tender and technical approval requirements.
Frequently Asked Questions
1. Where is the Prague municipal lighting project located?
The reference project is located in Prague, Czech Republic.
2. How many LED street lights were supplied for the project?
The project reference specifies 8,500 sets of LED street lights.
3. What wattage was used?
The reference configuration uses 100W LED street lights.
4. What LED source was used?
The reference configuration uses Lumileds SMD2835 LED.
5. What is the luminous efficiency?
The specified luminous efficiency is 130 lm/W.
6. What certification is specified?
The reference configuration is CE certified.
7. What is the warranty period?
The project reference specifies a 2-year warranty.
8. What intelligent control system was used?
The reference control configuration combines Microwave Motion Sensor + Light Control + Timer Control.
9. What is the input voltage?
The reference configuration uses 207–253V AC at 50Hz.
10. What is the IP rating?
The LED street light has an IP66 rating.
11. What surge protection is provided?
The reference configuration provides 10KV surge protection.
12. What energy-saving improvement was reported?
The project reference reports a 20% energy-saving improvement.
13. Can LIKELITE provide DIALux lighting calculations?
Yes. DIALux Evo lighting layouts can be included within the engineering support scope.
14. Can LIKELITE support large municipal projects?
Yes. The Prague reference involves 8,500 sets and demonstrates experience with large-volume municipal roadway lighting supply.
15. Can the same configuration be used for another city?
Not automatically. A new project should be evaluated according to road geometry, pole height, pole spacing, lighting requirements, electrical conditions and control strategy.
Discuss Your Municipal Lighting Project
Planning a municipal roadway lighting upgrade?
Send LIKELITE your project information for technical evaluation.
Recommended information:
Project location
Road type
Road width
Pole height
Pole spacing
Existing lighting
Required lighting level
Quantity
Voltage
Control requirements
Project schedule
LIKELITE can evaluate the project requirements and recommend a suitable LED street lighting configuration, lighting design and project supply plan.
