LIKELITE provides municipal lighting solutions for city roads, urban streets, residential roads, public infrastructure and roadway modernization projects.
The solution approach combines LED Street Lights, lighting design, electrical and circuitry design, onsite metering, photometric calculation, intelligent lighting control and project installation support.
For municipal road upgrades, the objective is not simply to replace existing lamps with LED fixtures. The lighting system needs to match the existing infrastructure, roadway conditions, operating requirements, energy targets and local project specifications.
LIKELITE supports municipal lighting projects from initial site assessment through product selection, lighting calculation, technical documentation and project installation.
Municipal Lighting Solution Scope
Municipal roadway lighting typically involves several connected requirements:
Existing street light replacement
LED conversion
Roadway illumination improvement
Energy-saving upgrades
Intelligent lighting control
Electrical compatibility
Surge protection
Outdoor environmental protection
Lighting calculation
Circuitry design
Large-volume product supply
Project installation
LIKELITE combines these requirements into a project-based lighting supply and engineering workflow.
Municipal Road Lighting Assessment
A municipal lighting upgrade normally starts with an assessment of the existing roadway and lighting infrastructure.
Typical information includes:
Road width
Number of lanes
Pole height
Pole spacing
Existing luminaire wattage
Existing lighting layout
Operating hours
Electrical supply
Roadway classification
Required illumination level
This information provides the basis for selecting the appropriate LED Street Lights and developing the lighting layout.
Municipal Lighting Design
Lighting and Circuitry Design
Municipal lighting projects often require coordination between lighting performance and existing electrical infrastructure.
LIKELITE can support:
Lighting layout
Circuitry design
Luminaire positioning
Electrical compatibility review
Lighting control configuration
Project technical documentation
The objective is to establish a lighting system that can be implemented within the existing roadway infrastructure.
Photometric Design and Calculation
LIKELITE supports multiple lighting design platforms according to project requirements.
DIALux Evo
For roadway lighting layout and photometric calculation.
LitePro DLX
For lighting design and calculation support.
AutoCAD
For roadway layouts, engineering drawings and project documentation.
AGI32
For lighting calculation and design verification where required.
The final lighting configuration should be based on actual project conditions rather than selecting a standard wattage without calculation.
Intelligent Municipal Lighting Control
Municipal lighting systems increasingly require lighting control in addition to LED replacement.
LIKELITE can integrate intelligent control functions according to project requirements.
Microwave Motion Sensor
The lighting system can detect movement and adjust lighting operation according to the configured control strategy.
Light Control
Light-control functionality can be used to coordinate operation with ambient daylight conditions.
Timer Control
Timer-based operation can be configured according to municipal operating schedules.
Combined Control Configuration
The reference Hamburg project used:
Microwave Motion Sensor + Light Control + Timer Control
This combination can support a more controlled operating strategy than fixed-output lighting.
The actual control logic should be confirmed according to the municipality's operating requirements and project specification.
120W Municipal LED Street Lights
For the Hamburg municipal roadway lighting reference, LIKELITE supplied a:
120W LED Street Light
Reference configuration:
132 lm/W
IP66
10KV Surge Protection
Lumileds SMD2835 LED
120° Beam Angle
5000K ±300K
Ra 80
The configuration was designed for AC 220–240V municipal roadway applications.
Reference Product Specification
| Parameter | Specification |
|---|---|
| Product | LED Street Lights |
| Rated Power | 120W |
| Input Voltage | 220–240V AC |
| LED Source | Lumileds SMD2835 |
| Luminous Efficiency | 132 lm/W |
| Beam Angle | 120° |
| IP Rating | IP66 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| CCT | 5000K ±300K |
| CRI | Ra 80 |
| Lamp Body | Aluminum Alloy |
| Material | ALU + PC |
| Lifespan | 30,000 hours |
| Frequency | 50Hz |
| Working Temperature | -20°C to 45°C |
Energy-Efficient Municipal Lighting
LED conversion can reduce energy consumption compared with older roadway lighting systems, but actual savings depend on the existing installation and operating conditions.
For the Hamburg reference project:
Reported Energy-Saving Improvement: 20%
This is a project-specific reference result.
The actual energy-saving performance of a municipal lighting upgrade can be affected by:
Existing luminaire wattage
LED replacement wattage
Operating hours
Lighting control
Roadway layout
Lighting levels
Maintenance conditions
Existing electrical system
For this reason, LIKELITE evaluates energy-saving targets together with the lighting design rather than treating a fixed percentage as a universal result.
Municipal Lighting Upgrade Process
01 — Project Information
Review roadway drawings, existing lighting information, project quantity and technical requirements.
02 — Onsite Metering
Measure existing roadway conditions where required.
03 — Roadway Lighting Design
Develop the preliminary lighting layout according to roadway conditions.
04 — Photometric Calculation
Use DIALux Evo, LitePro DLX or AGI32 according to the project requirements.
05 — Product Configuration
Select the appropriate LED Street Lights based on lighting performance, electrical conditions and environmental requirements.
06 — Intelligent Control
Configure motion sensing, light control and timer functions where required.
07 — Technical Documentation
Prepare product specifications, drawings, lighting calculations and certification documentation.
08 — Bulk Supply
Coordinate production, inspection, packaging and project delivery.
09 — Installation
Provide project installation support according to the agreed project scope.
Municipal Lighting Applications
LIKELITE municipal lighting solutions can be applied to:
Urban Roads
LED replacement and modernization for city streets.
Residential Roads
Lighting upgrades for residential and community road infrastructure.
Main Municipal Roads
High-volume roadway lighting for major urban traffic routes.
Secondary Roads
Energy-efficient LED lighting for secondary urban roads.
Public Infrastructure
Lighting for municipal facilities, public access roads and infrastructure areas.
Existing Street Light Replacement
Replacement of older conventional or inefficient lighting systems.
Smart Municipal Lighting
LED roadway lighting combined with motion, daylight and timer control.
Reference Project
Hamburg, Germany Municipal Road Lighting Upgrade
The Hamburg reference project involved municipal roadway lighting modernization.
Product: LED Street Lights
Power: 120W
Quantity: 12,000 sets
Certification: CE / ERP / WEEE
Warranty: 2 Years
Reported Energy-Saving Improvement: 20%
The project also used:
Microwave Motion Sensor + Light Control + Timer Control
Reference technical configuration:
120W / 132 lm/W / IP66 / 10KV / Lumileds SMD2835 / 120°
This project demonstrates how LED product supply, lighting design and intelligent lighting control can be combined within a municipal roadway lighting upgrade.
For detailed project facts and evidence, the dedicated Municipal Lighting Projects page should be used rather than this Solutions page.
Municipal Lighting Engineering Services
LIKELITE's engineering service scope can include:
Lighting and Circuitry Design
Onsite Metering
DIALux Evo Layout
LitePro DLX Layout
AutoCAD Layout
AGI32 Layout
Project Installation
The exact service combination is determined by the project requirements.
Certification and Documentation
For international municipal lighting procurement, certification and technical documentation are normally part of the product approval process.
The Hamburg reference project included:
CE / ERP / WEEE
LIKELITE can coordinate project documentation according to the destination market and tender requirements.
Typical documentation may include:
Product Datasheet
Technical Specification
Certification Documents
Photometric Data
DIALux Calculation
AutoCAD Drawings
Installation Instructions
Warranty Documentation
Packaging Information
Certification requirements should always be confirmed against the applicable local regulations and tender specifications.
Large-Volume Municipal Lighting Supply
Municipal lighting upgrades often involve thousands of luminaires and require consistent product specifications throughout the project.
The Hamburg reference project involved:
12,000 Sets
Large-volume projects require coordination between:
Product configuration
Production
Quality control
Certification
Packaging
Delivery
Technical documentation
Installation
LIKELITE can support project-based bulk supply for municipal lighting contractors, engineering companies, distributors and procurement organizations.
Municipal Lighting Solutions for Professional Buyers
Municipal Contractors
For city roadway modernization and street lighting replacement.
EPC Contractors
For municipal infrastructure construction and renovation.
Engineering Companies
For lighting design, calculation and product specification.
Road Contractors
For roadway lighting installation and replacement.
Lighting Distributors
For municipal lighting product supply and project orders.
Government Procurement Suppliers
For public infrastructure lighting tenders and bulk procurement.
Why Choose LIKELITE for Municipal Lighting?
Project-Based Product Configuration
Products are selected according to roadway conditions and project requirements.
Engineering Design Support
Lighting and circuitry design can be integrated into the supply process.
Photometric Calculation
DIALux Evo, LitePro DLX, AutoCAD and AGI32 support can be provided according to project requirements.
Intelligent Lighting Control
Motion sensing, light control and timer control can be integrated where required.
Large-Volume Supply
The Hamburg reference project involved 12,000 sets of LED Street Lights.
International Project Orientation
LIKELITE supports professional buyers working on overseas municipal and infrastructure lighting projects.
FAQ
1. What are municipal lighting solutions?
Municipal lighting solutions are integrated lighting systems for city roads, public roads and urban infrastructure, including LED luminaires, lighting design, electrical design, control systems and project installation support.
2. What products are commonly used for municipal roadway lighting?
LED Street Lights are commonly used for municipal roadway lighting because they can provide directional roadway illumination, outdoor protection and energy-efficient operation.
3. What LED Street Light configuration was used in the Hamburg reference project?
The reference configuration was 120W, 132 lm/W, IP66, 10KV surge protection and Lumileds SMD2835 LED.
4. How many LED Street Lights were supplied for the Hamburg project?
The reference project involved 12,000 sets.
5. What was the reported energy-saving improvement?
The Hamburg reference project reported a 20% energy-saving improvement.
6. Did the Hamburg project include intelligent lighting control?
Yes. The reference configuration included Microwave Motion Sensor + Light Control + Timer Control.
7. Can LIKELITE provide DIALux roadway lighting calculations?
Yes. DIALux Evo layout and calculation support can be included according to project requirements.
8. Does LIKELITE support AutoCAD roadway lighting layouts?
Yes. AutoCAD layout and engineering drawing support can be included.
9. Can AGI32 be used for municipal lighting projects?
Yes. AGI32 can be included where project lighting calculation or verification requires it.
10. What certification was included in the Hamburg reference project?
The reference project included CE, ERP and WEEE requirements.
11. What IP rating was specified for the reference LED Street Light?
The reference product was specified as IP66.
12. What surge protection was specified?
The reference configuration included 10KV surge protection.
13. What warranty was provided?
The reference project specification included a 2-year warranty.
14. Can LIKELITE supply large municipal lighting projects?
Yes. The Hamburg reference project involved 12,000 sets, demonstrating a large-volume municipal LED Street Light supply application.
15. What information is required for a municipal lighting quotation?
Typical information includes roadway drawings, road width, lane number, pole height, pole spacing, existing luminaire specifications, operating hours, project quantity, electrical conditions and required lighting performance.
Request a Municipal Lighting Solution
For a municipal roadway lighting upgrade, send LIKELITE:
Road Layout / CAD Drawing / Pole Height / Pole Spacing / Existing Luminaire Data / Project Quantity / Electrical Requirements / Lighting Requirements
LIKELITE can evaluate the project and provide:
LED Street Lights + Lighting Design + Photometric Calculation + Intelligent Control Options + Technical Documentation + Project Quotation
LIKELITE
Municipal LED Lighting Solutions for International Infrastructure Projects
