Engineering-based LED lighting solutions for municipal roads, city streets, residential roads, and public infrastructure.
LIKELITE provides complete municipal roadway lighting solutions for municipalities, EPC contractors, electrical contractors, engineering companies, lighting companies, and bulk project buyers.
The solution covers:
Site Assessment → Lighting Design → Simulation → Electrical Layout → LED Street Light Supply → Intelligent Control → Installation Support
The objective is not simply to replace existing fixtures with LED.
The objective is to develop a roadway lighting system that is suitable for the actual road conditions, electrical infrastructure, operating schedule, energy-saving requirements, and control strategy.
Municipal Road Lighting Challenges
Municipal roadway lighting systems often operate for long hours every night.
When conventional fixtures become inefficient or outdated, municipalities may face:
High electricity consumption
Aging roadway fixtures
Increasing maintenance requirements
Inconsistent lighting performance
Fixed lighting schedules
Limited control over nighttime operation
Existing electrical infrastructure constraints
Different road widths and pole spacing
Requirements for local product certification
The need for professional lighting calculations
A successful municipal lighting upgrade therefore requires more than a new fixture.
It requires an integrated lighting, electrical, control, and project implementation strategy.
LIKELITE Municipal Lighting Solution
LIKELITE combines LED roadway lighting products with project-based engineering services.
1. Existing Lighting Assessment
Before selecting the final LED Street Light configuration, LIKELITE can review the existing project conditions.
Typical assessment items include:
Existing fixture type
Existing fixture wattage
Pole height
Pole spacing
Road width
Existing electrical supply
Lighting operating hours
Existing control method
Local project requirements
Where required, onsite metering can be included in the project scope.
2. Roadway Lighting Design
Municipal road lighting should be designed around actual road geometry and mounting conditions.
LIKELITE can provide:
Lighting and circuitry design
Onsite metering
DIALux Evo layout
Litepro DLX layout
AutoCAD layout
AGi32 layout
Pole and fixture positioning
Lighting distribution analysis
Electrical circuit planning
The purpose is to determine the appropriate fixture configuration rather than selecting a product only by wattage.
3. LED Municipal Street Lights
For the Kuwait Al Ahmadi-area reference project, the proposed municipal roadway lighting configuration uses:
100W LED Street Lights
with:
120 lm/W luminous efficiency
and:
Lumileds SMD3030 LED
The fixture is configured for:
AC240V / 50Hz
and outdoor roadway applications.
Reference Project — Kuwait Municipal Road Lighting Upgrade
Project Location
Abu Halifa, Kuwait
Application
Municipal Road Lighting Upgrade
Product
Quantity
1,500 sets
Power
100W
Certification
KUCAS
Warranty
2 Years
Energy-Saving Target
22%
Intelligent Control
Microwave Motion Sensor + Light Control + Timer Control
LED Street Light Technical Configuration
| Parameter | Specification |
|---|---|
| Product | LED Street Lights |
| Power | 100W |
| Quantity — Reference Project | 1,500 sets |
| Certification | KUCAS |
| Input Voltage | AC240V |
| Frequency | 50Hz |
| IP Rating | IP65 |
| LED Source | Lumileds SMD3030 |
| Luminous Efficiency | 120 lm/W |
| Beam Angle | 120° |
| CCT | 5000K ± 400K |
| CRI | Ra 80 |
| Housing | Aluminum Alloy |
| Optical Material | PC |
| Material | ALU + PC |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| Power Supply | AC |
| Lifespan | 30,000 Hours |
| Working Temperature | -20°C to +45°C |
| Warranty | 2 Years |
Intelligent Municipal Lighting Control
Municipal lighting does not always need to operate at the same lighting level throughout the entire night.
LIKELITE can integrate different control functions according to project requirements.
Microwave Motion Sensor
A microwave motion sensor can detect movement within the configured detection area.
This provides a control option for roads where nighttime traffic levels vary.
Light Control
Light-control functionality can be used to manage lighting operation according to ambient light conditions.
This can help prevent unnecessary operation when sufficient natural light is available.
Timer Control
Timer control allows the operating schedule to be configured according to municipal requirements.
Different operating periods can be established according to local conditions.
Combined Control Strategy
Microwave Motion Sensor + Light Control + Timer Control
This combination provides a more flexible lighting-control structure than a conventional fixed ON/OFF schedule.
Final control parameters should be determined according to the road type, traffic pattern, operating hours, and municipal requirements.
Municipal Lighting Engineering Services
Lighting & Circuitry Design
LIKELITE can coordinate roadway lighting design with the existing or planned electrical infrastructure.
Onsite Metering
Existing lighting conditions can be assessed through onsite measurement where required.
DIALux Evo Layout
DIALux Evo can be used to establish the roadway lighting model and evaluate the proposed lighting arrangement.
Litepro DLX Layout
Litepro DLX layout support is available according to project requirements.
AutoCAD Layout
AutoCAD drawings can be provided for lighting, electrical, and engineering coordination.
AGi32 Layout
AGi32 lighting calculation and layout support can be provided when required by the project.
Project Installation
Project installation support can be included according to the agreed project scope.
Municipal Lighting Upgrade Process
STEP 01 — Project Requirement Review
The project requirements are reviewed before product selection.
Typical information includes:
Road Layout
Pole Height
Pole Spacing
Road Width
Existing Fixture
Operating Hours
Electrical Supply
Local Standards
Energy-Saving Target
Control Requirements
STEP 02 — Site Assessment
Existing roadway conditions and lighting infrastructure are reviewed.
Where required, onsite measurements are used as part of the engineering assessment.
STEP 03 — Lighting Simulation
The roadway is modeled according to the available project information.
DIALux Evo, Litepro DLX, AutoCAD, or AGi32 can be used according to the engineering workflow.
STEP 04 — Fixture Configuration
The LED Street Light is selected according to:
Power + Optical Distribution + Efficiency + IP Rating + Electrical Configuration + Control Requirements
For the Kuwait reference configuration:
100W + 120 lm/W + IP65 + Lumileds SMD3030 + 10KV Surge
STEP 05 — Intelligent Control Configuration
The control strategy is configured according to:
Motion Detection + Ambient Light + Operating Schedule
using:
Microwave Motion Sensor + Light Control + Timer Control
STEP 06 — Product Supply
The approved LED Street Light configuration is manufactured and supplied according to the project specification.
The Kuwait reference project specifies:
1,500 sets
of 100W LED Street Lights.
STEP 07 — Installation & Commissioning
The lighting system is installed according to the approved layout and electrical requirements.
Following installation, lighting operation and control functions can be checked and commissioned.
Energy-Saving Performance
Target Energy Saving: 22%
The Kuwait reference project specifies an energy-saving target of:
22%
Actual energy savings depend on the existing lighting system and final operating conditions.
Relevant factors include:
Existing fixture wattage
Replacement fixture wattage
Annual operating hours
Existing control schedule
Motion-sensor settings
Timer settings
Ambient-light control
Road traffic conditions
The 22% figure is therefore treated as the project-specific energy-saving target provided for this reference project, rather than a universal performance claim for every municipal lighting project.
Why Choose LIKELITE for Municipal Lighting?
Engineering-Based Project Support
LIKELITE supports the project beyond fixture supply.
The engineering scope can include:
Onsite Metering + Lighting Design + DIALux + CAD + AGi32 + Product Supply + Installation
Project-Specific Configuration
Road width, pole spacing, mounting height, electrical conditions, and lighting requirements differ from project to project.
LIKELITE therefore supports project-specific LED Street Light configurations rather than applying one standard fixture to every road.
Intelligent Lighting Capability
Municipal projects can incorporate:
Microwave Motion Sensor
Light Control
Timer Control
according to the project control strategy.
Regional Certification Support
The Kuwait reference project specifies:
KUCAS
certification.
Certification requirements should always be confirmed against the current local regulations, tender documents, and project specifications.
Outdoor Roadway Protection
The reference fixture configuration provides:
IP65
protection for outdoor municipal roadway applications.
Municipal Lighting Applications
LIKELITE municipal lighting solutions can be applied to:
Municipal Roads
City Streets
Urban Roads
Residential Roads
Community Roads
Collector Roads
Public Infrastructure
Public Parking Areas
Industrial Access Roads
Roadway Renovation Projects
Energy-Saving Lighting Upgrades
Intelligent Street Lighting Projects
Project Product & Logistics Data
Brand: LIKELITE
Origin: Guangdong, China
Product: LED Street Lights
Power: 100W
Input: AC240V / 50Hz
LED: Lumileds SMD3030
Efficiency: 120 lm/W
Beam Angle: 120°
IP Rating: IP65
Surge: 10KV
Voltage Resistance: 1.5KV
CCT: 5000K ± 400K
CRI: Ra 80
Material: Aluminum Alloy + PC
Lifespan: 30,000 Hours
Operating Temperature: -20°C to +45°C
Warranty: 2 Years
Single Package: 57 × 18 × 8 cm
Single Gross Weight: 7.5 kg
Municipal Lighting Solutions FAQ
1. What is a municipal lighting solution?
A municipal lighting solution is an integrated approach covering roadway assessment, lighting design, LED fixture selection, electrical planning, control systems, installation, and commissioning.
2. What municipal lighting services does LIKELITE provide?
LIKELITE can provide onsite metering, lighting and circuitry design, DIALux Evo, Litepro DLX, AutoCAD, AGi32, LED Street Light supply, and project installation support.
3. Can LIKELITE work with existing street light poles?
Yes. Existing pole height, spacing, mounting conditions, road width, and electrical infrastructure can be reviewed before final fixture selection.
4. What LED Street Light is used in the Kuwait reference project?
The reference configuration uses a 100W LED Street Light with Lumileds SMD3030 LED and 120 lm/W luminous efficiency.
5. What certification is specified for the Kuwait project?
The reference project specifies KUCAS certification.
Final compliance should be confirmed against the project's current regulatory and tender requirements.
6. What intelligent lighting control is used?
The reference configuration uses:
Microwave Motion Sensor + Light Control + Timer Control.
7. What is the energy-saving target?
The Kuwait reference project specifies:
22% energy saving.
Actual savings depend on the original lighting system and operating conditions.
8. What is the IP rating of the fixture?
The reference LED Street Light is specified as:
IP65.
9. What is the input voltage?
The fixture is configured for:
AC240V / 50Hz.
10. What surge protection is provided?
The reference configuration specifies:
10KV surge protection.
11. What is the warranty period?
The Kuwait reference project specifies:
2 years.
12. Can LIKELITE provide DIALux Evo calculations?
Yes. DIALux Evo lighting layouts and calculations can be provided according to project requirements.
13. Can LIKELITE provide AutoCAD or AGi32 layouts?
Yes. AutoCAD and AGi32 layout support is available for projects requiring these engineering workflows.
14. Can LIKELITE support large municipal orders?
Yes. LIKELITE supports bulk project supply for municipalities, EPC contractors, engineering companies, electrical contractors, lighting companies, and project buyers.
15. How can we request a municipal lighting solution?
Provide the road layout, pole height, pole spacing, existing fixture information, quantity, operating hours, local certification requirements, and control requirements.
LIKELITE can then evaluate the project and develop a project-specific municipal lighting configuration.
Request a Municipal Lighting Solution
Planning a Municipal Road Lighting Upgrade?
Send LIKELITE:
Road Layout + Pole Information + Existing Lighting Data + Required Quantity + Local Standards + Energy Target + Control Requirements
LIKELITE can support the project from lighting assessment and engineering design through LED Street Light supply and installation.
