3,500 Sets of 100W LED Roadway Lights for Urban Road Infrastructure
Project Location: Naples, Italy Project Type: Roadway Lighting Upgrade Product: LED Roadway Lights Quantity: 3,500 sets Rated Power: 100W Energy Saving: 26% Warranty: 2 Years Compliance: CE / RoHS 2.0 / ErP / WEEE / CONAI Brand: LIKELITE Origin: Guangdong, China
LIKELITE supplied 3,500 sets of 100W LED Roadway Lights for a roadway lighting upgrade project in Naples, Italy.
The project was configured around high-efficiency LED roadway lighting, outdoor protection, surge protection and engineering-based lighting design. The supplied luminaires use CREE SMD3030 LEDs, with a specified luminous efficiency of 150 lm/W, IP66 protection and 10KV surge protection.
The project reported a 26% improvement in energy efficiency, providing a practical reference for municipal road upgrades, roadway contractors, engineering companies and bulk project procurement.
Project Scope
The Naples project involved a large-scale roadway lighting deployment of 3,500 LED luminaires.
The project configuration addressed:
3,500 LED Roadway Lights
100W rated power
150 lm/W luminous efficiency
CREE SMD3030 LED source
IP66 outdoor protection
10KV surge protection
1.5KV voltage resistance
5000K ±300K CCT
Ra80 color rendering
220–240V AC input
Aluminum-alloy housing
120° beam angle
30,000-hour stated lifespan
European compliance documentation
Lighting and circuitry design
Onsite metering
Lighting simulation
Engineering layout
Project installation support
The project was therefore structured as an engineering-oriented roadway lighting upgrade rather than a catalogue-only product purchase.
Project Technical Configuration
Parameter
Project Specification
Project
Naples Roadway Lighting Upgrade
Location
Naples, Italy
Product
LED Roadway Lights
Quantity
3,500 sets
Power
100W
Input Voltage
220–240V AC
Power Supply
AC
Frequency
50Hz
LED Source
CREE SMD3030
Luminous Efficiency
150 lm/W
Beam Angle
120°
CCT
5000K ±300K
CRI
Ra80
IP Rating
IP66
Surge Protection
10KV
Voltage Resistance
1.5KV
Housing
Aluminum Alloy
Material
ALU + PC
Lifespan
30,000 hours
Operating Temperature
-20°C to 45°C
Certifications
CE / RoHS 2.0 / ErP / WEEE / CONAI
Warranty
2 years
Brand
LIKELITE
Origin
Guangdong, China
100W LED Roadway Light Configuration
The project uses 100W LED Roadway Lights with a specified luminous efficiency of 150 lm/W.
The luminaire configuration combines LED efficiency, optical distribution and outdoor protection for roadway applications.
CREE SMD3030 LED
The specified light source is CREE SMD3030 LED, providing the primary LED output for the roadway luminaire.
120° Beam Angle
The luminaire uses a specified 120° beam angle. Actual roadway illumination depends on the road geometry, pole arrangement, mounting height, luminaire orientation and project-specific photometric calculation.
IP66 Protection
IP66 protection provides the enclosure rating specified for outdoor roadway use.
10KV Surge Protection
The 10KV surge specification provides an additional electrical protection measure for outdoor roadway lighting infrastructure.
Aluminum-Alloy Housing
The lamp body uses aluminum alloy with an ALU + PC material configuration, providing a practical structure for long-term outdoor installation.
Roadway Lighting Engineering Design
For a 3,500-set roadway project, product selection needs to be connected with the actual road environment and installation conditions.
The purpose of this engineering stage is to connect the selected luminaire with the actual roadway layout rather than treating the 100W product specification as a standalone decision.
Onsite Metering and Project Layout
Onsite Metering provides project-specific site information that can support the engineering design process.
Depending on the project requirements, roadway lighting layouts can be prepared using:
DIALux Evo
For roadway illumination calculations and visualization.
LitePro DLX
For lighting design and layout development.
AutoCAD
For engineering drawings and installation-related layouts.
AGi32
For lighting calculation and engineering verification.
The final lighting arrangement should be based on actual project conditions and approved engineering calculations.
3,500-Set Deployment
The project quantity of 3,500 sets requires standardized product configuration and controlled project execution.
Standardized 100W LED Roadway Lights provide a consistent product platform for the project.
The actual mounting height, pole spacing, road width and lighting performance should be established through project-specific engineering documents rather than assumed from the luminaire catalogue.
26% Energy Saving
The Naples project reported an energy saving improvement of 26%.
The project result is associated with the use of a high-efficiency LED roadway lighting configuration.
Key technical factors include:
100W LED roadway lighting
150 lm/W luminous efficiency
CREE SMD3030 LED
Optimized optical distribution
Engineering-based lighting layout
Project installation
Energy savings in roadway lighting should ultimately be evaluated against the previous lighting system, operating schedule, installed wattage and required lighting levels.
Outdoor Performance Configuration
The specified operating temperature range is -20°C to 45°C.
The luminaire combines:
IP66 + Aluminum Alloy + 10KV Surge Protection + 220–240V AC + 1.5KV Voltage Resistance
This configuration is intended for outdoor roadway lighting applications requiring weather protection and electrical protection.
The stated product lifespan is 30,000 hours.
European Compliance
The Naples project was specified with:
CE
RoHS 2.0
ErP
WEEE
CONAI
For an Italian roadway lighting project, technical and compliance documentation forms an important part of the procurement package.
Project documentation should be organized with:
Product datasheet
Certification documents
Electrical specifications
Photometric information
Technical drawings
Lighting calculation files
Installation documents
Delivery records
This documentation structure helps procurement and engineering teams review the product configuration throughout the project process.
Project Installation and Commissioning
LIKELITE's specified project service includes Project Installation.
Installation and commissioning activities can include:
Luminaire mounting
Electrical connection
Circuit verification
Mechanical fixing inspection
Luminaire orientation
Night-time operation testing
Lighting system commissioning
Installation documentation
Final installation procedures should follow the project's approved engineering drawings and applicable local requirements.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Why the Naples Project Matters
The project creates a clear technical and geographic relationship:
Final system selection should be based on actual roadway geometry, lighting requirements, mounting conditions, electrical infrastructure and local standards.
LIKELITE Roadway Project Workflow
LIKELITE can support an international roadway lighting project through a structured project workflow:
Project Requirement
↓
Site Information
↓
Onsite Metering
↓
Lighting and Circuitry Design
↓
DIALux Evo / LitePro DLX / AutoCAD / AGi32
↓
LED Roadway Light Configuration
↓
Technical & Compliance Documentation
↓
Production & Quality Control
↓
Delivery
↓
Project Installation
↓
Commissioning
This structure allows EPC contractors, engineering companies and bulk project buyers to coordinate product procurement with the technical requirements of the roadway project.
Request a Roadway Lighting Project Assessment
For a roadway lighting upgrade in Italy or another international market, LIKELITE can evaluate the project based on:
Project location
Road dimensions
Existing lighting system
Lighting requirements
Pole configuration
Electrical infrastructure
Project quantity
Environmental conditions
Local compliance requirements
Project support can include:
LED Roadway Light selection
Lighting and circuitry design
Onsite metering
DIALux Evo layout
LitePro DLX layout
AutoCAD engineering drawings
AGi32 calculations
Technical documentation
Compliance documentation
Bulk project supply
Project installation support
FAQ
1. What roadway lighting project did LIKELITE supply in Naples? It was a roadway lighting upgrade project in Naples, Italy, configured with 3,500 sets of LED Roadway Lights.
2. How many LED Roadway Lights were supplied? The project quantity was 3,500 sets.
3. What was the power rating? Each LED Roadway Light was specified at 100W.
4. What was the luminous efficiency? The supplied specification states 150 lm/W.
5. Which LED source was used? The project specification uses CREE SMD3030 LED.
6. What was the beam angle? The specified beam angle was 120°.
7. What was the IP rating? The LED Roadway Lights were specified with IP66 protection.
8. Did the luminaires include surge protection? Yes. The project specification includes 10KV surge protection.
9. What input voltage was specified? The specified input voltage was 220–240V AC at 50Hz.
10. What color temperature and CRI were specified? The specification was 5000K ±300K with Ra80.
11. What certifications were specified? The project configuration included CE, RoHS 2.0, ErP, WEEE and CONAI.
12. What energy saving was reported? The project reported a 26% energy saving improvement.
13. What engineering services were included? Lighting and Circuitry Design, Onsite Metering, DIALux Evo, LitePro DLX, AutoCAD, AGi32 and Project Installation were specified.
14. What was the operating temperature range? The specified range was -20°C to 45°C.
15. What was the stated lifespan and warranty? The specified lifespan was 30,000 hours and the warranty was 2 years.
