Industrial Lighting Solutions for Commercial and Industrial Facilities
Industrial workshops require more than high-output lighting. The lighting system must provide sufficient illumination for work areas, reliable operation in demanding environments, controlled energy consumption, and practical maintenance over the operating life of the facility.
LIKELITE provides industrial LED lighting solutions for workshops, factories, warehouses, production areas and other industrial facilities. Our service covers lighting recommendation, onsite metering, lighting and circuitry design, DIALux Evo simulation, LitePro DLX, AutoCAD and AGi32 layouts, product supply, installation support and lighting control integration.
For industrial lighting upgrade projects, LIKELITE combines LED flood lighting, optical design and intelligent lighting controls to create a practical system based on the actual facility layout and operating requirements.
Industrial Lighting Challenges
Industrial Lighting Projects commonly involve:
Insufficient illumination in production and working areas
Uneven light distribution and dark zones
High electricity consumption from conventional lighting
Long operating hours and high lighting load
Difficult maintenance at high mounting positions
Lighting requirements that change according to production schedules
Unnecessary lighting during unoccupied periods
Existing electrical circuits that need to be considered during retrofit
Different illumination requirements between working and non-working areas
A suitable industrial lighting system should therefore consider illumination, uniformity, mounting height, beam distribution, operating hours, control strategy, electrical infrastructure and maintenance access rather than selecting luminaires by wattage alone.
LIKELITE Industrial Lighting Solution
LIKELITE develops Industrial Lighting Solutions around five engineering stages.
1. Site Assessment and Onsite Metering
The project starts with the existing lighting and electrical conditions.
LIKELITE can support:
Existing luminaire assessment
Onsite illumination measurement
Workshop layout review
Mounting-height assessment
Existing circuit assessment
Operating-hours analysis
Lighting control requirement analysis
The collected information is used as the basis for lighting design and product selection.
2. Lighting Design and Simulation
Lighting layouts can be prepared according to the project requirements using:
DIALux Evo
LitePro DLX
AutoCAD
AGi32
The design process evaluates luminaire positioning, beam angle, light distribution and expected illumination across the working area.
This allows EPC contractors, engineering companies and project buyers to review the proposed lighting system before installation.
3. LED Flood Lighting Selection
For industrial workshops and large working areas, LIKELITE can provide high-efficiency LED flood lighting designed for broad-area illumination.
A reference configuration for industrial workshop applications is:
LIKELITE LED Flood Light — 120W
Input Voltage: AC230V
Frequency: 50Hz
LED Source: CREE SMD3030
Luminaire Efficiency: 120 lm/W
Beam Angle: 110°
IP Rating: IP65
Surge Protection: 10KV
Voltage Resistance: 1.5KV
Color Temperature: 5000K ± 500K
CRI: Ra80
Material: Aluminum Alloy + PC
Lifespan: 30,000 hours
Working Temperature: -20°C to +45°C
Power Supply: AC
Certification: GS
The final wattage, quantity, beam distribution and mounting arrangement should be determined according to the actual facility and lighting calculation.
4. Smart Lighting Control
Industrial lighting does not always need to operate at full output throughout the entire working day.
For suitable applications, LIKELITE can integrate:
Microwave Motion Sensor + Light Control + Timer Control
The control strategy can be configured around:
Occupancy
Ambient light conditions
Working schedules
Production periods
Non-working periods
This can reduce unnecessary lighting operation and support lower electricity consumption.
5. Installation and Project Support
LIKELITE can support the project from design through implementation, including:
Lighting & Circuitry Design → Onsite Metering → Lighting Simulation → Layout → Product Supply → Installation Support → Commissioning
This structure allows the lighting supplier to work as part of the engineering project team rather than only supplying luminaires.
Reference Solution: Frankfurt Industrial Workshop Lighting Upgrade
A representative industrial workshop lighting application in Frankfurt, Germany used LIKELITE LED Flood Lights as part of an industrial lighting upgrade.
Project Reference
| Item | Specification |
|---|---|
| Application | Industrial Workshop |
| Location | Frankfurt, Germany |
| Product | LED Flood Lights |
| Power | 120W |
| Quantity | 600 sets |
| Certification | GS |
| IP Rating | IP65 |
| Efficiency | 120 lm/W |
| Beam Angle | 110° |
| Warranty | 3 years |
| Energy Saving | 30% |
| Lighting Control | Microwave Motion Sensor + Light Control + Timer Control |
The reference demonstrates how LED efficiency and intelligent lighting control can be combined in an industrial workshop environment.
For a complete project-specific record, including project documentation, installation information and final measured performance, see the relevant Industrial Lighting Project Case page.
Industrial Lighting Applications
LIKELITE industrial lighting solutions can be configured for:
Industrial Workshops
Broad-area LED illumination for manufacturing and general working environments.
Manufacturing Facilities
Lighting systems designed around production areas, workstations and operational schedules.
Factories
Energy-efficient LED upgrades for large indoor and semi-outdoor industrial spaces.
Warehouses and Logistics Areas
High-output lighting combined with occupancy and scheduling controls where appropriate.
Maintenance and Service Areas
Reliable illumination for inspection, maintenance and equipment servicing.
Industrial Retrofit Projects
Replacement of conventional lighting systems with high-efficiency LED luminaires.
Why LIKELITE for Industrial Lighting Solutions?
Engineering-Oriented Lighting Design
LIKELITE does not treat industrial lighting as a simple product selection exercise. Lighting recommendations are based on application, layout, mounting conditions, illumination requirements and operating patterns.
Simulation Before Installation
DIALux Evo, LitePro DLX, AutoCAD and AGi32 layouts can be used to support technical evaluation before installation.
LED + Smart Control
The combination of high-efficiency LED flood lights and appropriate control strategies can help reduce lighting energy consumption.
Project Supply Capability
LIKELITE supports bulk industrial lighting requirements for EPC contractors, engineering companies, lighting distributors, project buyers and industrial facility upgrades.
Custom Project Support
Product configuration, lighting layout, electrical design requirements and control strategies can be evaluated according to the project.
Industrial Lighting Solution Process
01 — Project Requirement
Facility type, layout, operating hours and lighting objectives.
02 — Site Assessment
Existing lighting, illumination and electrical conditions.
03 — Lighting Design
Luminaire selection, positioning and lighting distribution.
04 — Simulation
DIALux Evo / LitePro DLX / AGi32 / AutoCAD layouts.
05 — Technical Confirmation
Product specifications, quantity, control system and project requirements.
06 — Production & Supply
Bulk production and project delivery.
07 — Installation & Commissioning
Installation support and lighting system commissioning.
08 — Project Documentation
Technical documents and project records for project completion.
Industrial Lighting FAQ
1. What are industrial lighting solutions?
Industrial lighting solutions are complete lighting systems designed for factories, workshops, warehouses and other industrial facilities. They normally include lighting selection, layout design, lighting calculations, controls, electrical considerations and installation support.
2. What type of LED lights are suitable for industrial workshops?
LED flood lights, high bay lights and other industrial LED luminaires can be used depending on ceiling height, layout, working area, required illumination and mounting conditions.
3. Why use LED flood lights in industrial workshops?
LED flood lights can provide broad-area illumination with high luminous efficiency. They are suitable for applications where wide light distribution is required.
4. What is the advantage of 120 lm/W efficiency?
A 120 lm/W luminaire produces approximately 120 lumens of light per watt of electrical input. Higher efficiency can help reduce installed lighting power when the required illumination level can be achieved.
5. Can LIKELITE provide DIALux lighting calculations?
Yes. LIKELITE can provide DIALux Evo layouts and support other engineering layout formats including LitePro DLX, AutoCAD and AGi32.
6. Can industrial LED lighting include motion sensors?
Yes. For suitable applications, microwave motion sensors can be integrated with light-control and timer-control strategies.
7. Can smart controls reduce industrial lighting energy consumption?
They can reduce unnecessary operating time by controlling lighting according to occupancy, ambient conditions and schedules. Actual savings depend on the facility and operating pattern.
8. What IP rating is suitable for industrial lighting?
The required IP rating depends on dust, moisture, water exposure and the installation environment. IP65 is one option for applications requiring protection against dust and water jets.
9. Can LIKELITE support industrial lighting retrofit projects?
Yes. LIKELITE can support existing lighting assessment, onsite metering, lighting design, simulation, product selection, supply and installation support.
10. Does LIKELITE provide industrial lighting in bulk quantities?
Yes. LIKELITE supports bulk supply for EPC contractors, engineering companies, distributors, lighting brands and industrial project buyers.
11. What information is required for an industrial lighting design?
Typical information includes facility dimensions, layout, mounting height, existing lighting, operating hours, working areas, electrical conditions and required illumination.
12. Can LIKELITE customize the industrial LED lighting solution?
Yes. Product specifications, optical configuration, control strategy and project support can be evaluated according to application requirements.
13. What is the warranty for the Frankfurt reference configuration?
The referenced 120W LED Flood Light configuration was supplied with a 3-year warranty.
14. What industrial lighting services does LIKELITE provide?
Services include lighting and circuitry design, onsite metering, DIALux Evo layout, LitePro DLX layout, AutoCAD layout, AGi32 layout and project installation support.
15. How can an EPC contractor start an industrial lighting project with LIKELITE?
Provide the project location, facility drawings or dimensions, mounting height, existing lighting information, operating schedule and target requirements. LIKELITE can then evaluate the lighting solution and prepare the appropriate technical design.
Industrial Lighting Solutions by LIKELITE
LIKELITE provides industrial LED lighting solutions from lighting assessment and simulation to product supply and project implementation.
For industrial workshops, factories and manufacturing facilities requiring an engineered LED lighting upgrade, contact LIKELITE for project-specific lighting design and technical support.
Industrial Lighting → LED Flood Lights → Lighting Design → DIALux Simulation → Smart Lighting Control → Project Supply → Installation Support
