The Pécs municipal road lighting upgrade is an urban roadway lighting project in Hungary involving the replacement and upgrade of municipal road lighting infrastructure with energy-efficient LED Street Lights and intelligent lighting control.
For this project, LIKELITE supplied 6,500 sets of 100W LED Street Lights configured for AC 230V municipal roadway applications. The project specification included IP66 protection, 10KV surge protection, Lumileds SMD2835 LED technology and intelligent control combining microwave motion sensing, light control and timer control.
The project information indicates an energy-saving improvement of 20%.
Microwave Motion Sensor + Light Control + Timer Control
Light Source
Lumileds SMD2835 LED
Luminous Efficiency
140 lm/W
IP Rating
IP66
Surge Protection
10KV
Color Temperature
5000K ±300K
CRI
Ra80
Rated Life
30,000 hours
Operating Temperature
-20°C to 45°C
Origin
Guangdong, China
Brand
LIKELITE
Project Background
Municipal roadway lighting upgrades require a practical balance between lighting performance, energy consumption, outdoor protection, operating control and project-scale procurement.
For the Pécs project, the lighting upgrade was based on 100W LED street lights combined with intelligent control functions.
The selected configuration was designed around the electrical and environmental conditions of municipal roadway applications, with AC 230V ±10% input, IP66 protection and 10KV surge protection.
The project quantity of 6,500 sets required a consistent product configuration suitable for large-scale municipal deployment.
Project Lighting Configuration
The Pécs project used a 100W LED Street Light configuration with a stated luminous efficiency of 140 lm/W.
The luminaire specification included:
Lumileds SMD2835 LED
120° beam angle
5000K ±300K color temperature
Ra80 color rendering
IP66 protection
10KV surge protection
1.5KV voltage resistance
Aluminum alloy lamp body
ALU + PC construction
AC power supply
50Hz frequency
30,000-hour rated life
Operating temperature of -20°C to 45°C
This configuration was selected for a large-scale municipal roadway application rather than an individual commercial or residential installation.
Intelligent Lighting Control
An important part of the Pécs project was the integration of three control functions:
Microwave Motion Sensor
Motion detection can be used to identify changes in roadway activity and support adaptive lighting operation where applicable.
Light Control
Light control enables the lighting system to respond to ambient light conditions and manage operation accordingly.
Timer Control
Timer control provides scheduled lighting operation according to the project's operating requirements.
The combination of these functions provides a more flexible operating strategy than conventional fixed-output roadway lighting.
The actual control logic should be configured according to local traffic conditions, municipal operating requirements and applicable regulations.
Large-Scale Municipal Deployment
With 6,500 sets, the Pécs project represents a large-scale municipal LED street lighting deployment.
At this scale, product consistency becomes an important project consideration.
The project configuration required consistent:
Electrical specifications
LED light source
Optical configuration
Protection level
Color temperature
Mechanical construction
Control configuration
Packaging
Warranty conditions
For municipal procurement, consistent configuration across the project helps reduce differences between different roadway sections during installation and operation.
Lighting Engineering Services
The Pécs project was supported by a range of lighting engineering services.
The available project service scope included:
Lighting and circuitry design
Onsite metering
DIALux Evo layout
LitePro DLX layout
AutoCAD layout
AGi32 layout
Project installation
These services connect the supplied LED street lights with the engineering requirements of the roadway project.
Rather than treating the product as a standalone purchase, the project approach considers the lighting equipment together with site conditions, layout and installation.
Energy-Saving Performance
The project information indicates an energy-saving improvement of 20%.
Energy performance in municipal roadway lighting depends on several factors, including luminaire efficiency, installed power, operating hours, lighting control, traffic conditions and the characteristics of the previous lighting system.
For the Pécs project, the 100W LED street light configuration was combined with microwave motion sensing, light control and timer control.
This combination provided an energy-efficiency strategy beyond the LED fixture itself.
Outdoor Protection and Reliability
Municipal street lights operate continuously in outdoor environments and can be exposed to rain, dust, temperature changes, electrical disturbances and other environmental conditions.
The Pécs project configuration included:
IP66 protection
Designed for demanding outdoor roadway environments.
10KV surge protection
Provides enhanced protection against electrical surge events.
Aluminum alloy housing
Provides a robust metal housing structure for outdoor use and heat dissipation.
-20°C to 45°C operating temperature
The stated operating range covers a broad range of outdoor conditions.
30,000-hour rated life
Provides a defined service-life reference for project evaluation.
Electrical Specification
The project LED street lights were configured for:
Input voltage: AC 230V ±10%
Power supply: AC
Frequency: 50Hz
Voltage resistance: 1.5KV
Surge protection: 10KV
These specifications are aligned with the electrical requirements provided for the Pécs project reference.
Final electrical compatibility should always be confirmed against the actual local grid conditions and project tender requirements.
Photometric and Color Configuration
The supplied configuration included a 120° beam angle, 5000K ±300K color temperature and Ra80 color rendering index.
The stated luminous efficiency was 140 lm/W.
For a municipal roadway project, these parameters need to be evaluated together with road geometry, mounting height, pole spacing and required lighting performance.
Lighting calculation files such as DIALux Evo, LitePro DLX or AGi32 can be used to evaluate the actual roadway layout before final installation.
Project Installation
Project installation was included within the listed lighting solution service scope.
For large municipal projects, installation requires consistency between the approved lighting configuration and the actual site conditions.
Installation activities may involve:
Luminaire mounting
Electrical connection
Pole interface checking
Control system installation
System commissioning
Lighting operation checking
Actual installation scope depends on the contractual project requirements.
Project Result
Based on the information supplied for the Pécs municipal road lighting upgrade:
6,500 sets of LED street lights were involved.
The selected luminaire power was 100W.
Stated luminous efficiency was 140 lm/W.
The system used IP66 outdoor protection.
10KV surge protection was specified.
Lumileds SMD2835 LEDs were used.
Intelligent control combined microwave motion sensor, light control and timer control.
The project information indicates 20% energy-saving improvement.
The product carried CE certification.
The stated warranty was 2 years.
These project facts provide a reference for LIKELITE's capability in large-scale municipal roadway lighting supply.
Project Value for Municipal Road Upgrades
The Pécs project demonstrates several practical considerations relevant to municipal lighting upgrades.
Large-scale supply
6,500 sets required consistent product supply and project coordination.
Energy efficiency
The project reported a 20% energy-saving improvement.
Intelligent operation
Three control functions were combined into the lighting system.
Outdoor protection
IP66 and 10KV surge protection were incorporated into the specified configuration.
Engineering support
Lighting design, onsite metering, calculation and installation support were included in the project service scope.
Before & After Comparison DIALux EVO Lighting Simulation Verification
Pécs Municipal Lighting Project — Key Facts
Location: Pécs, Hungary
Project Type: Municipal Road Lighting Upgrade
Product: LED Street Lights
Quantity: 6,500 sets
Power: 100W
Efficiency: 140 lm/W
Protection: IP66
Surge: 10KV
LED: Lumileds SMD2835
Control: Microwave Motion Sensor + Light Control + Timer Control
Energy Saving: 20% improvement
Certification: CE
Warranty: 2 years
Request a Municipal Lighting Project Proposal
If you are planning a municipal road lighting upgrade, urban roadway replacement project or large-scale LED street lighting procurement, LIKELITE can support the project with product configuration, lighting calculation, technical documentation and project supply.
Send the project drawings, road layout, existing lighting information or tender specifications to LIKELITE for project evaluation.
LIKELITE
Outdoor LED Lighting Engineering Project Solution Provider
Pécs Municipal Lighting Project FAQ
1. Where is the LIKELITE municipal lighting project located?
The project reference is located in Pécs, Hungary.
2. What type of project was the Pécs project?
It was a municipal road lighting upgrade project.
3. How many LED street lights were supplied?
The project information specifies 6,500 sets.
4. What wattage was used?
The specified LED street light power was 100W.
5. What was the luminous efficiency?
The stated lamp luminous efficiency was 140 lm/W.
6. What LED technology was used?
The configuration used Lumileds SMD2835 LED technology.
7. What protection level did the street light have?
The specified protection level was IP66, with 10KV surge protection.
8. What intelligent control system was used?
The project configuration included microwave motion sensor, light control and timer control.
9. What energy-saving improvement was achieved?
The supplied project information indicates a 20% energy-saving improvement.
10. What was the input voltage?
The specified input voltage was AC 230V ±10%.
11. What color temperature was specified?
The configuration used 5000K ±300K.
12. What was the warranty period?
The stated warranty was 2 years.
13. What certification was specified?
The project configuration carried CE certification.
14. What engineering services were available for the project?
The listed services included lighting and circuitry design, onsite metering, DIALux Evo, LitePro DLX, AutoCAD and AGi32 layouts, as well as project installation.
15. Can LIKELITE support similar municipal lighting projects?
Yes. LIKELITE supports project-based outdoor LED lighting requirements for municipal road upgrades, EPC contractors, engineering companies and large-scale project procurement.
