LIKELITE provides LED roadway lighting solutions for contractors, engineering companies, distributors, municipal procurement teams and infrastructure project buyers.
The solution combines LED Roadway Lights, lighting design, onsite metering, roadway lighting calculations, electrical layout and project installation support.
For roadway projects, the objective is not simply to replace existing lamps with LED fixtures. The lighting system needs to be configured according to roadway conditions, electrical requirements, mounting conditions, lighting layout and project specifications.
LIKELITE supports this process from product selection through project implementation.
Roadway Lighting Solution Scope
A typical LIKELITE roadway lighting solution can include:
Site Assessment → Onsite Metering → Lighting & Circuitry Design → Product Selection → DIALux Evo Layout → Engineering Drawing → Technical Confirmation → Product Supply → Project Installation
The exact scope can be adjusted according to the project requirements.
Solution Components
LED Roadway Lights
Roadway lighting design
Lighting and circuitry design
Onsite metering
DIALux Evo layout
LitePro DLX layout
AutoCAD layout
AGi32 layout
Product configuration
Electrical coordination
Project installation support
LED Roadway Lights
For ordinary roadway applications, LIKELITE offers LED Roadway Lights in different power configurations to match road width, pole spacing, mounting height, lighting requirements and local electrical conditions.
A representative configuration used for the Jinja, Uganda roadway lighting application is:
80W LED Roadway Light
130 lm/W luminous efficiency
CREE SMD2835 LED
120° beam angle
IP66 protection
10KV surge protection
Aluminum alloy housing
AC 220–240V
50Hz
5000K ±300K
CRI Ra 80
30,000-hour rated lifespan
2-year warranty
UG-PVoC certification
This configuration is suitable as a reference for roadway projects requiring outdoor protection, high-efficiency LED lighting and stable AC operation.
Roadway Lighting Design
Roadway lighting design is one of the key parts of a complete roadway lighting solution.
LIKELITE can work with project drawings and site measurements to establish the lighting arrangement before final equipment selection.
The design process can consider:
Road width
Number of lanes
Pole height
Pole spacing
Pole arrangement
Mounting position
Road classification
Required illumination
Lighting uniformity
Existing electrical infrastructure
Local power supply
Environmental conditions
The objective is to establish a practical relationship between the roadway geometry, lighting layout and selected LED roadway light.
Onsite Metering
Where site conditions require verification, onsite metering can be used to establish the existing roadway conditions before equipment configuration.
Typical information may include:
Existing fixture type
Existing fixture wattage
Pole spacing
Pole height
Road width
Existing lighting arrangement
Electrical supply
Existing illumination conditions
This information provides the engineering basis for product selection and lighting calculation.
DIALux Evo Lighting Layout
LIKELITE supports DIALux Evo roadway lighting layouts for projects requiring engineering-based lighting calculations.
The lighting model can be developed from available roadway drawings and project parameters.
Depending on the project requirements, the calculation package can be used to evaluate:
Lighting distribution
Illuminance
Lighting uniformity
Fixture arrangement
Pole spacing
Mounting conditions
Lighting performance
Final calculation values should be based on the actual project geometry and verified project parameters.
LitePro DLX, AutoCAD and AGi32 Support
Different engineering teams use different design platforms.
To support project coordination, LIKELITE can provide layout support using:
LitePro DLX
For roadway lighting design and lighting distribution analysis.
AutoCAD
For roadway lighting layouts, pole locations, circuitry and engineering drawings.
AGi32
For professional lighting calculations and project design verification.
The specific software and file format can be coordinated with the project engineering team.
Electrical & Circuitry Design
A roadway lighting solution also needs to consider the electrical system supporting the fixtures.
LIKELITE can provide lighting and circuitry design support covering:
Lighting circuit arrangement
Fixture connection
Power supply requirements
Voltage configuration
Circuit distribution
Surge protection requirements
Installation coordination
For the representative Uganda configuration, the LED Roadway Light operates at:
AC 220–240V / 50Hz
with 10KV surge protection and 1.5KV voltage resistance.
Outdoor Protection for Roadway Applications
Roadway lighting equipment operates in exposed outdoor environments.
The representative LIKELITE roadway configuration provides:
IP66 Protection
The IP66 enclosure configuration is designed for outdoor roadway applications where protection against dust and water ingress is required.
10KV Surge Protection
A 10KV surge protection configuration is available for projects where roadway lighting equipment needs enhanced protection against electrical surges.
Aluminum Alloy Housing
The lamp body uses aluminum alloy to provide a practical structure for outdoor roadway lighting applications.
Operating Temperature
The specified operating temperature range is:
-20°C to +45°C
Optical Configuration
The representative 80W roadway lighting configuration provides:
LED Source: CREE SMD2835
Efficiency: 130 lm/W
Beam Angle: 120°
CCT: 5000K ±300K
CRI: Ra 80
The final optical configuration should be selected according to roadway geometry and the required lighting distribution rather than selecting beam angle only according to product catalogue specifications.
Energy-Saving Roadway Lighting
LED conversion can reduce roadway lighting power consumption when the replacement system is properly matched to the existing installation and operating requirements.
The Jinja, Uganda application provides a reference result of:
23% Energy Saving
For a formal project energy-saving calculation, LIKELITE recommends comparing:
Existing System Power → Proposed LED System Power → Operating Hours → Annual Energy Consumption → Electricity Cost
This provides the project owner or contractor with a measurable basis for evaluating the lighting upgrade.
Roadway Lighting Upgrade Process
01 — Project Requirements
Review the roadway type, project scope, quantity requirements, local standards and electrical conditions.
02 — Site Information
Collect roadway dimensions, pole arrangement, mounting conditions and existing lighting information.
03 — Lighting Design
Develop the lighting layout and select the appropriate roadway lighting configuration.
04 — Calculation
Use DIALux Evo, LitePro DLX, AutoCAD or AGi32 according to project requirements.
05 — Technical Confirmation
Confirm power, voltage, IP rating, surge protection, optical configuration, certification and installation requirements.
06 — Product Supply
Manufacture and supply the confirmed LED Roadway Lights.
07 — Installation
Provide project installation support according to the agreed project scope.
08 — Project Handover
Provide the agreed technical and project documentation.
Representative Roadway Application — Jinja, Uganda
The Jinja roadway lighting application demonstrates how the solution can be configured for an international roadway project.
Application: Ordinary Roadway Lighting
Location: Jinja, Uganda
LED Roadway Lights: 80W
Quantity: 1,200 sets
Certification: UG-PVoC
Warranty: 2 Years
Reported Energy Saving: 23%
The application uses the following representative configuration:
AC 220–240V / 50Hz + IP66 + CREE SMD2835 + 130 lm/W + 10KV Surge Protection + 5000K ±300K + CRI Ra 80
Why Choose LIKELITE for Roadway Lighting Solutions?
LIKELITE combines product manufacturing with engineering support for international roadway lighting applications.
Product Capability
LED Roadway Lights configured for different roadway applications and electrical environments.
Engineering Capability
Lighting and circuitry design, onsite metering and professional lighting layout support.
Software Support
DIALux Evo, LitePro DLX, AutoCAD and AGi32 layout capabilities.
Project Capability
Support for product supply and project installation according to project scope.
International Procurement
Products manufactured in Guangdong, China for overseas project supply.
Technical Reference — 80W LED Roadway Light
| Specification | Configuration |
|---|---|
| Product | LED Roadway Lights |
| Power | 80W |
| Input Voltage | AC 220–240V |
| Frequency | 50Hz |
| LED Source | CREE SMD2835 |
| Efficiency | 130 lm/W |
| Beam Angle | 120° |
| Material | ALU+PC |
| Lamp Body | Aluminum Alloy |
| IP Rating | IP66 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| CCT | 5000K ±300K |
| CRI | Ra 80 |
| Lifespan | 30,000 hours |
| Working Temperature | -20°C to +45°C |
| Warranty | 2 Years |
| Certification | UG-PVoC |
| Brand | LIKELITE |
| Origin | Guangdong, China |
FAQ
1. What is included in a LIKELITE roadway lighting solution?
Depending on project requirements, the solution can include LED Roadway Lights, onsite metering, lighting and circuitry design, lighting calculations, engineering layouts, product supply and installation support.
2. Can LIKELITE provide roadway lighting design?
Yes. LIKELITE provides roadway lighting and circuitry design support for international projects.
3. Does LIKELITE support DIALux Evo?
Yes. DIALux Evo layouts can be provided according to project requirements and available roadway data.
4. Can LIKELITE provide AutoCAD roadway lighting layouts?
Yes. AutoCAD can be used for roadway lighting layouts, pole arrangements and circuitry drawings.
5. Does LIKELITE support AGi32?
Yes. AGi32 can be used for professional roadway lighting calculations where required.
6. Can LIKELITE conduct onsite metering?
Yes. Onsite metering can be included where the project requires existing roadway conditions to be verified.
7. What LED Roadway Light configuration is referenced for the Uganda application?
The representative configuration is an 80W LED Roadway Light with CREE SMD2835 LED, 130 lm/W efficiency, IP66 protection and 10KV surge protection.
8. What voltage does the 80W roadway light use?
The specified configuration operates at AC 220–240V, 50Hz.
9. Is the roadway light suitable for outdoor applications?
Yes. The specified configuration has an IP66 protection rating and aluminum alloy housing for outdoor roadway applications.
10. What surge protection is available?
The representative configuration provides 10KV surge protection.
11. What certification was specified for the Uganda application?
The specified project configuration uses UG-PVoC certification.
12. Can LIKELITE provide different roadway lighting powers?
Yes. Roadway lighting power can be configured according to the roadway geometry, pole arrangement, lighting requirements and project specifications.
13. Can LIKELITE support EPC contractors?
Yes. LIKELITE can coordinate product specifications, lighting layouts, technical documents, supply and installation support with EPC project requirements.
14. Can LIKELITE supply large quantities for roadway projects?
Yes. LIKELITE supports bulk project procurement and international roadway lighting supply.
15. What is the difference between this page and a LIKELITE roadway lighting project case?
This page explains the solution methodology, Products, engineering services and implementation process. Individual project pages document specific project locations, quantities, project results and supporting evidence.
Related Solutions
LED Street Lighting Solutions
LED Highway Lighting Solutions
Municipal Road Lighting Solutions
Urban Road Lighting Solutions
Solar Street Lighting Solutions
Roadway Lighting Projects
CTA:
Discuss Your Roadway Lighting Project
Send your roadway drawings, pole layout, quantity, voltage, road dimensions or project specifications. LIKELITE can review the requirements and recommend the appropriate LED Roadway Lighting configuration and engineering support.
