LIKELITE provides LED roadway lighting solutions for municipalities, EPC contractors, engineering companies, lighting distributors and infrastructure project buyers.
Our roadway lighting solutions combine LED Roadway Lights, lighting design, onsite metering, photometric simulation, circuitry design, technical documentation and project installation support.
For an urban roadway retrofit, the objective is not simply to replace an existing lamp with an LED fixture. The proposed lighting system must be matched to the roadway geometry, pole configuration, electrical supply, environmental conditions, required illumination and long-term maintenance requirements.
LIKELITE supports the engineering process from existing-site assessment through lighting design, product configuration and project installation.
Roadway Lighting Solution Scope
Engineering Support from Existing Lighting Assessment to Installation
A roadway lighting upgrade typically involves several connected engineering stages.
Existing Lighting Assessment
Before selecting the replacement luminaire, the existing roadway system should be evaluated.
LIKELITE can support:
Existing luminaire assessment
Onsite metering
Pole height and spacing review
Roadway width assessment
Existing electrical system review
Existing lighting performance evaluation
Existing energy consumption assessment
This information provides the technical basis for the LED retrofit design.
Roadway Lighting Design
LIKELITE develops roadway lighting layouts according to project-specific conditions.
The design process can consider:
Roadway geometry
Pole arrangement
Mounting height
Pole spacing
Luminaire position
Beam distribution
Luminaire orientation
Required lighting performance
Supported design platforms include:
DIALux Evo · LitePro Dlx · AGi32 · AutoCAD
Photometric Roadway Lighting Design
Lighting Performance Before Installation
Roadway lighting should be evaluated by lighting performance rather than fixture wattage alone.
Photometric simulation can be used to review:
Average illuminance
Minimum illuminance
Uniformity
Road surface illumination
Pole spacing
Mounting height
Beam distribution
Luminaire orientation
Potential dark areas
LIKELITE can provide DIALux Evo, LitePro Dlx or AGi32 layouts according to the project requirements.
The final luminaire configuration should be confirmed through project-specific calculations because roadway width, pole spacing and mounting conditions directly affect the lighting result.
LED Roadway Lighting Retrofit
Upgrade Existing Roadway Lighting Infrastructure
Many municipal roadway Projects involve replacing conventional lighting equipment while retaining suitable existing poles and electrical infrastructure.
A typical retrofit process is:
Existing System Assessment → Onsite Metering → Roadway Survey → Photometric Design → LED Luminaire Selection → Electrical Layout → Product Supply → Installation → Commissioning
Where existing poles and infrastructure are technically suitable, retaining them can reduce unnecessary civil work and shorten the implementation scope.
The final reuse decision should always be based on onsite inspection and engineering evaluation.
LED Roadway Lights for Hot and Dry Urban Environments
Designed for Outdoor Roadway Applications
Roadway lighting in regions such as Saudi Arabia requires attention to electrical stability, outdoor protection, thermal conditions and long-term operation.
The Jeddah reference configuration uses:
80W LED Roadway Lights
AC 220V
60Hz
IP65
10KV surge protection
Aluminum alloy housing
CREE SMD2835 LED
120 lm/W
5000K ±500K
-20°C to +45°C operating temperature
Jeddah Urban Roadway Lighting Solution Reference
2,000 Sets of 80W LED Roadway Lights
A Saudi Arabia urban roadway lighting retrofit reference uses a configuration designed around a municipal roadway upgrade in Jeddah.
Reference Configuration
| Parameter | Specification |
|---|---|
| Application | Urban Roadway Lighting |
| Location | Jeddah, Saudi Arabia |
| Product | LED Roadway Lights |
| Power | 80W |
| Quantity | 2,000 sets |
| Certification | SASO |
| Input Voltage | AC 220V |
| Frequency | 60Hz |
| IP Rating | IP65 |
| LED Source | CREE SMD2835 |
| Luminous Efficiency | 120 lm/W |
| Beam Angle | 120° |
| CCT | 5000K ±500K |
| CRI | Ra 80 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| Housing | Aluminum Alloy |
| Material | ALU + PC |
| Lifespan | 30,000 hours |
| Working Temperature | -20°C to +45°C |
| Warranty | 2 years |
| Energy Saving Target | 20% |
| Origin | Guangdong, China |
| Brand | LIKELITE |
80W LED Roadway Lighting Configuration
High-Efficiency LED Roadway Luminaire
The Jeddah reference configuration uses an 80W LED Roadway Light with a nominal luminous efficiency of 120 lm/W.
LED Source
CREE SMD2835 LED
The selected LED source provides the light output required for the specified roadway lighting configuration.
Optical Distribution
120° beam angle
The wide beam distribution is suitable for roadway applications where broad coverage is required.
Final optical selection should be validated through project-specific photometric calculations.
Color Temperature
5000K ±500K
This configuration provides a neutral-to-cool white appearance suitable for urban roadway applications.
Color Rendering
CRI Ra 80
The specified CRI provides standard color rendering for general roadway and municipal outdoor lighting.
Electrical and Protection Configuration
AC 220V Roadway Lighting System
The Jeddah configuration is specified for:
AC 220V / 60Hz
Additional electrical protection includes:
10KV surge protection
1.5KV voltage resistance
AC power supply
Outdoor Protection
IP65 Aluminum Alloy Roadway Luminaire
The specified roadway luminaire uses:
IP65 + Aluminum Alloy Housing
The IP65 enclosure provides protection against dust ingress and water jets from outdoor directions.
The aluminum alloy lamp body provides mechanical protection and supports thermal management during continuous operation.
For Projects with environmental conditions beyond the specified operating range, LIKELITE can evaluate the required product configuration separately.
Roadway Lighting Engineering Services
Product Supply Combined with Lighting Engineering
LIKELITE provides engineering services around the LED roadway luminaire rather than treating the product as an isolated component.
Lighting and Circuitry Design
Roadway lighting and electrical layout support according to project requirements.
Onsite Metering
Collection of existing lighting and electrical data for retrofit evaluation.
DIALux Evo Layout
Roadway lighting simulation and photometric analysis.
LitePro Dlx Layout
Lighting design and layout support using LitePro Dlx.
AGi32 Layout
Photometric calculation and roadway lighting analysis.
AutoCAD Layout
Engineering drawings and technical layout support.
Project Installation
Installation-related technical support and project coordination according to project scope.
Roadway Lighting Retrofit Methodology
A Practical Engineering Workflow
Step 1 — Project Data Collection
Collect:
Project location
Roadway dimensions
Existing luminaire information
Pole height
Pole spacing
Electrical voltage
Lighting requirements
Available CAD drawings
Step 2 — Site Assessment
Review the existing roadway lighting infrastructure and conduct onsite metering where required.
Step 3 — Lighting Simulation
Build the roadway model and evaluate the proposed LED luminaire using DIALux Evo, LitePro Dlx or AGi32.
Step 4 — Product Configuration
Determine:
LED wattage
Beam angle
CCT
IP rating
Surge protection
Housing
Electrical configuration
Mounting requirements
Step 5 — Technical Confirmation
Review the lighting layout, technical specification and project documentation with the project team.
Step 6 — Production
LIKELITE manufactures the approved LED roadway lighting configuration.
Step 7 — Installation
Supply and installation support are coordinated according to the project scope.
Step 8 — Commissioning
The completed lighting system is inspected and adjusted according to the approved project requirements.
Energy-Efficient Roadway Lighting
20% Energy Saving Target
The Jeddah reference project specifies an energy-saving target of:
20%
Energy savings in a roadway retrofit depend on the relationship between the existing system and the proposed LED system.
Relevant factors include:
Existing lamp wattage
Existing ballast or driver losses
LED connected load
Operating hours
Lighting control
Existing lighting levels
Proposed lighting design
Therefore, the 20% figure should be treated as the project energy-saving target unless supported by measured energy data.
For Projects requiring documented energy performance, LIKELITE can evaluate the existing and proposed connected loads as part of the engineering process.
Why use LIKELITE for Roadway Lighting?
A Roadway Lighting Supplier with Engineering Support
Roadway lighting projects require coordination between the luminaire and the infrastructure.
The key relationships are:
Road Geometry + Pole Layout + Mounting Height + Optics + Wattage + Electrical System + Photometric Design + Installation
LIKELITE integrates these elements into one project-oriented workflow.
Project-Specific Configuration
The roadway luminaire can be configured according to voltage, certification, optical requirements and environmental conditions.
Photometric Design
DIALux Evo, LitePro Dlx and AGi32 support can be included according to project requirements.
Retrofit Support
Existing roadway lighting systems can be evaluated for LED replacement and infrastructure reuse.
Outdoor Protection
IP65 protection, aluminum alloy housing and 10KV surge protection are available within the specified Jeddah configuration.
International Project Support
LIKELITE supports overseas EPC contractors, engineering companies, lighting brands, distributors and infrastructure project buyers.
Typical Roadway Lighting Applications
LIKELITE LED roadway lighting solutions are suitable for:
Municipal roads
Urban streets
City arterial roads
Highway access roads
Road intersections
Industrial roads
Commercial roads
Residential roads
Public infrastructure
Roadway retrofit programs
New roadway lighting installations
Roadway Lighting Solution Deliverables
What the Project Team Can Receive
Depending on project requirements, the technical package can include:
LED roadway luminaire specification
Product datasheet
Photometric files
DIALux Evo layout
LitePro Dlx layout
AGi32 layout
AutoCAD layout
Lighting and circuitry design
Onsite metering data
Installation documentation
Technical quotation
Project installation support
This approach allows the lighting supplier to participate in the engineering process instead of only delivering finished luminaires.
Request a Roadway Lighting Solution
For a roadway lighting retrofit or new installation, provide LIKELITE with:
Project location
Roadway width
Pole height
Pole spacing
Existing luminaire wattage
Existing lighting type
Project quantity
Input voltage
Required certification
Lighting standard
CAD drawings
Site photographs
Installation requirements
LIKELITE can evaluate the available project information and develop a proposed roadway lighting configuration, photometric layout and commercial quotation.
LIKELITE — LED Roadway Lighting Solutions for Global Infrastructure Projects
Roadway Lighting Solutions FAQ
1. What is a roadway lighting solution?
A roadway lighting solution combines LED roadway luminaires with site assessment, lighting design, photometric calculation, electrical layout and installation support for a specific roadway application.
2. Can LIKELITE provide LED roadway retrofit solutions?
Yes. LIKELITE can support LED retrofit projects involving existing roadway lighting systems, subject to site and infrastructure evaluation.
3. What LED roadway light is specified for the Jeddah reference?
The reference configuration uses an 80W LED Roadway Light.
4. What certification is specified for the Saudi Arabia application?
The Jeddah reference configuration specifies SASO certification.
5. What input voltage is used?
The specified configuration uses AC 220V / 60Hz.
6. What is the IP rating?
The specified roadway luminaire has an IP65 protection rating.
7. What LED source is used?
The configuration uses CREE SMD2835 LED.
8. What is the luminous efficiency?
The specified luminous efficiency is 120 lm/W.
9. What surge protection is included?
The specified configuration includes 10KV surge protection.
10. What color temperature is available for the Jeddah configuration?
The specified configuration is 5000K ±500K, with CRI Ra 80.
11. What is the warranty period?
The Jeddah reference configuration specifies a 2-year warranty.
12. What energy savings are expected?
The project specification indicates an energy-saving target of 20%. Actual savings depend on the existing lighting system, LED connected load, operating hours and control strategy.
13. Can LIKELITE provide DIALux Evo calculations?
Yes. LIKELITE can provide DIALux Evo layouts and also supports LitePro Dlx and AGi32 for roadway lighting design.
14. Can LIKELITE provide AutoCAD roadway lighting layouts?
Yes. AutoCAD layout support is available as part of the specified lighting engineering service scope.
15. Can LIKELITE provide installation support?
Yes. Project installation support can be included according to the project scope and contractor requirements.
