LIKELIT provides LED roadway lighting solutions for municipalities, EPC contractors, engineering companies, lighting distributors and infrastructure project buyers.
Our roadway lighting solutions combine LED Roadway Lights, onsite metering, lighting and circuitry design, photometric simulation, electrical layout and project installation support.
A roadway lighting upgrade is not simply a fixture replacement.
The selected luminaire must work with the existing road geometry, pole configuration, electrical supply, lighting requirements, environmental conditions and installation structure.
LIKELIT supports the complete engineering process from existing lighting assessment and roadway survey through product configuration, photometric design, technical documentation and project installation.
Roadway Lighting Solution Scope
Engineering Support from Site Assessment to Installation
A successful roadway lighting upgrade starts with the existing infrastructure.
LIKELIT can support the following project stages.
Existing Lighting Assessment
Before selecting the replacement LED roadway luminaire, the existing lighting system can be evaluated through:
Existing luminaire assessment
Onsite metering
Roadway width review
Pole height and spacing review
Existing electrical system assessment
Existing lighting performance evaluation
Existing energy consumption assessment
The collected information establishes the technical basis for the proposed LED roadway lighting system.
Roadway Lighting Design
The lighting layout is developed according to the actual roadway conditions.
Design considerations include:
Roadway geometry
Pole arrangement
Mounting height
Pole spacing
Luminaire position
Beam distribution
Installation angle
Required lighting performance
LIKELIT supports:
DIALux Evo · LitePro Dlx · AGi32 · AutoCAD
Photometric Roadway Lighting Design
Evaluate the Lighting System Before Installation
Roadway lighting performance cannot be determined by wattage alone.
Photometric calculations can evaluate:
Average illuminance
Minimum illuminance
Uniformity
Road surface illumination
Pole spacing
Mounting height
Luminaire orientation
Beam distribution
Potential dark areas
LIKELIT can develop roadway lighting layouts using DIALux Evo, LitePro Dlx or AGi32 according to project requirements.
The final luminaire configuration should be confirmed through project-specific calculations because road width, pole spacing, mounting height and installation angle directly affect the final lighting performance.
LED Roadway Lighting Retrofit
Upgrade Existing Roadway Infrastructure with LED
For municipal and urban roadway Projects, the existing poles and electrical infrastructure may potentially be retained where their condition and configuration are suitable.
A typical retrofit workflow is:
Existing System Assessment → Onsite Metering → Roadway Survey → Photometric Design → LED Luminaire Selection → Electrical Layout → Product Supply → Installation → Commissioning
This approach allows project teams to evaluate the existing infrastructure before deciding which components need replacement.
The final reuse of poles, brackets and electrical equipment should be determined through onsite inspection and engineering evaluation.
High-Efficiency LED Roadway Lighting
120W LED Roadway Lights for Urban Road Applications
The Salvador, Brazil reference configuration uses a 120W LED Roadway Light with a nominal luminous efficiency of:
130 lm/W
The luminaire uses CREE SMD3030 LED technology and a 120° beam angle for broad roadway light distribution.
The configuration is designed around the electrical and environmental requirements specified for the application.
Salvador, Brazil Roadway Lighting Solution Reference
5,000 Sets of 120W LED Roadway Lights
A municipal urban roadway lighting upgrade reference in Salvador, Brazil uses 5,000 sets of 120W LED Roadway Lights.
The reference configuration includes:
| Parameter | Specification |
|---|---|
| Application | Urban Roadway Lighting |
| Location | Salvador, Brazil |
| Product | LED Roadway Lights |
| Power | 120W |
| Quantity | 5,000 sets |
| Certification | INMETRO |
| Input Voltage | AC 110V |
| Frequency | 60Hz |
| IP Rating | IP66 |
| LED Source | CREE SMD3030 |
| Luminous Efficiency | 130 lm/W |
| Beam Angle | 120° |
| CCT | 5000K ±300K |
| CRI | Ra 80 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| Housing | Aluminum Alloy |
| Material | ALU + PC |
| Lifespan | 30,000 hours |
| Power Supply | AC |
| Working Temperature | -20°C to +45°C |
| Warranty | 3 years |
| Energy Saving Target | 25% |
| Origin | Guangdong, China |
| Brand | LIKELIT |
120W LED Roadway Lighting Configuration
CREE SMD3030 LED + 130 lm/W
The specified roadway luminaire uses:
120W + CREE SMD3030 + 130 lm/W
This configuration provides a high-efficiency LED lighting option for urban roadway applications.
Optical Configuration
LED Source: CREE SMD3030
Luminous Efficiency: 130 lm/W
Beam Angle: 120°
CCT: 5000K ±300K
CRI: Ra 80
The 120° beam angle provides broad light distribution. Final optical performance should be verified through the project's roadway photometric calculation.
Electrical Configuration
AC 110V / 60Hz Roadway Lighting
The Salvador reference configuration is specified for:
AC 110V / 60Hz
Electrical protection includes:
10KV surge protection
1.5KV voltage resistance
AC power supply
The electrical configuration should be confirmed against the actual site supply and project technical specifications before production.
Outdoor Protection
IP66 Aluminum Alloy Roadway Luminaire
The specified luminaire uses:
IP66 + Aluminum Alloy Housing
IP66 protection is suitable for outdoor roadway lighting applications requiring protection against dust ingress and powerful water jets.
The aluminum alloy housing provides structural protection and supports thermal management during continuous operation.
The specified operating temperature is:
-20°C to +45°C
For Projects with environmental conditions outside the specified range, LIKELIT can evaluate the required thermal, driver and material configuration separately.
Roadway Lighting Engineering Services
Product Supply Combined with Project Engineering
LIKELIT's roadway lighting service extends beyond supplying LED fixtures.
Lighting and Circuitry Design
Roadway lighting and electrical layout support according to project requirements.
Onsite Metering
Existing lighting and electrical data collection for retrofit assessment.
DIALux Evo Layout
Roadway photometric simulation and lighting performance evaluation.
LitePro Dlx Layout
Lighting layout support using LitePro Dlx.
AGi32 Layout
Photometric calculation and roadway lighting analysis.
AutoCAD Layout
Engineering drawing and technical layout support.
Project Installation
Installation-related technical coordination and support according to project scope.
Roadway Lighting Engineering Workflow
A Structured Process for Retrofit and New Installation Projects
Step 1 — Project Information
Collect:
Project location
Roadway dimensions
Pole height
Pole spacing
Existing luminaire information
Existing wattage
Electrical voltage
Lighting standard
Quantity
Available CAD drawings
Step 2 — Existing System Assessment
Review the existing roadway infrastructure and conduct onsite metering where required.
Step 3 — Photometric Design
Develop the roadway model and simulate the proposed LED luminaire using DIALux Evo, LitePro Dlx or AGi32.
Step 4 — Product Configuration
Determine:
LED wattage
Optical distribution
CCT
IP rating
Surge protection
Housing
Electrical configuration
Mounting requirements
Step 5 — Technical Confirmation
Review lighting layouts, technical specifications and project documentation with the project team.
Step 6 — Manufacturing
LIKELIT manufactures the approved roadway lighting configuration.
Step 7 — Installation
Supply and installation support are coordinated according to the project scope.
Step 8 — Commissioning
The completed lighting system is inspected and adjusted according to the approved project requirements.
Energy-Efficient Roadway Lighting
25% Energy Saving Target
The Salvador reference project specifies an energy-saving target of:
25%
The actual energy savings of a roadway retrofit depend on the relationship between the existing lighting system and the proposed LED system.
Relevant factors include:
Existing luminaire wattage
Existing ballast or driver losses
New LED connected load
Operating hours
Lighting control strategy
Existing lighting levels
Proposed lighting design
Therefore, the 25% figure should be presented as the project energy-saving target unless supported by measured energy data.
For projects requiring documented energy performance, LIKELIT can support a before-and-after connected-load comparison based on available project data.
Project-Scale Supply Capability
5,000 Sets for Municipal Roadway Applications
The Salvador reference configuration represents a project quantity of:
5,000 sets
At 120W per luminaire, the nominal connected LED fixture load is:
600 kW
Calculated from:
5,000 × 120W = 600,000W
This is the nominal fixture load and does not represent total annual electricity consumption. Actual energy consumption depends on operating hours, controls and system conditions.
The project-scale quantity demonstrates the ability to support bulk roadway lighting requirements while maintaining a defined technical configuration across the supplied luminaires.
Why Choose LIKELIT for Roadway Lighting?
Engineering, Product and Project Support in One Workflow
Roadway lighting performance depends on the interaction between:
Road Geometry + Pole Layout + Mounting Height + Optics + Wattage + Electrical System + Photometric Design + Installation
LIKELIT integrates these elements into a project-oriented workflow.
Project-Specific Configuration
Luminaire specifications can be developed around voltage, certification, optical requirements and environmental conditions.
Photometric Design Support
DIALux Evo, LitePro Dlx and AGi32 layouts can be provided according to project requirements.
Retrofit Capability
Existing roadway lighting infrastructure can be evaluated for LED replacement and potential reuse.
Outdoor Protection
The Salvador configuration includes IP66 protection, aluminum alloy housing and 10KV surge protection.
Bulk Project Supply
The production and supply process can support large roadway lighting quantities with consistent technical specifications.
International Project Support
LIKELIT works with EPC contractors, engineering companies, lighting distributors, lighting brands and infrastructure project buyers.
Typical Applications
LIKELIT LED Roadway Lighting Solutions are suitable for:
Municipal roadway upgrades
Urban street lighting
City arterial roads
Highway access roads
Road intersections
Industrial roads
Commercial roads
Residential roads
Public infrastructure
LED roadway retrofit programs
New roadway lighting installations
Roadway Lighting Solution Deliverables
Technical Documentation and Project Support
Depending on project requirements, the technical package can include:
LED roadway luminaire specification
Product datasheet
Photometric files
DIALux Evo layout
LitePro Dlx layout
AGi32 layout
AutoCAD layout
Lighting and circuitry design
Onsite metering data
Installation documentation
Technical quotation
Project installation support
This allows the project team to evaluate the roadway lighting system before procurement and installation.
Request a Roadway Lighting Solution
For an urban roadway retrofit or new roadway lighting project, provide:
Project location
Roadway width
Pole height
Pole spacing
Existing luminaire type
Existing wattage
Quantity
Input voltage
Required certification
Lighting standard
CAD drawings
Site photographs
Installation requirements
LIKELIT can evaluate the available project information and develop a proposed LED roadway lighting configuration, photometric layout and commercial quotation.
LIKELIT
LED Roadway Lighting Solutions for Municipal and Infrastructure Projects
Roadway Lighting Solutions FAQ
1. What is a roadway lighting solution?
A roadway lighting solution combines LED roadway luminaires with site assessment, photometric design, electrical layout, product configuration and installation support for a specific roadway application.
2. Can LIKELIT provide LED roadway retrofit solutions?
Yes. LIKELIT can support existing roadway lighting retrofit projects after evaluating the existing poles, electrical infrastructure and roadway conditions.
3. What LED roadway light is specified for the Salvador reference?
The reference configuration uses a 120W LED Roadway Light.
4. What certification is specified for the Brazil application?
The Salvador reference configuration specifies INMETRO certification.
5. What is the input voltage?
The specified input voltage is AC 110V, with a 60Hz frequency.
6. What LED source is used?
The specified luminaire uses CREE SMD3030 LED.
7. What is the luminous efficiency?
The specified luminous efficiency is 130 lm/W.
8. What is the IP rating?
The specified roadway luminaire has an IP66 protection rating.
9. What surge protection is included?
The configuration includes 10KV surge protection.
10. What color temperature is specified?
The Salvador reference uses 5000K ±300K, with CRI Ra 80.
11. What is the warranty period?
The specified warranty period is 3 years.
12. What energy saving is expected?
The project specification indicates an energy-saving target of 25%. Actual savings depend on the existing lighting system, LED connected load, operating hours and control strategy.
13. Can LIKELIT provide DIALux Evo calculations?
Yes. LIKELIT can provide DIALux Evo layouts and supports LitePro Dlx and AGi32 for roadway lighting design.
14. Can LIKELIT provide AutoCAD roadway lighting layouts?
Yes. AutoCAD layout support is included within the specified roadway lighting engineering service scope.
15. Can LIKELIT supply large roadway lighting quantities?
Yes. The Salvador reference involves 5,000 sets, demonstrating project-scale supply capability for municipal and infrastructure roadway lighting applications.
