Saint-Étienne, France Industrial Workshop Lighting Upgrade

200W LED Flood Lights | 1,000 Sets | Smart Lighting Control

Project Location: Saint-Étienne, France
Project Type: Industrial Workshop Lighting Upgrade
Application: Industrial Workshops
Product: LED Flood Lights
Rated Power: 200W
Quantity: 1,000 sets
Certification: CE (LVD + EMC) / RoHS / ErP
Warranty: 2 Years
Reported Energy-Saving Improvement: 25%
Smart Control: Microwave Motion Sensor + Light Control + Timer Control
Supplier: LIKELITE
Manufacturing Origin: Guangdong, China

Project Overview

The Saint-Étienne industrial workshop lighting project involved the upgrade of the existing lighting system with 1,000 sets of 200W LIKELITE LED Flood Lights.

The project configuration combined LED lighting with automatic control functions to address the requirements of industrial workshop operation.

The lighting system was configured with:

200W LED Flood Lights + Microwave Motion Sensor + Light Control + Timer Control

The project specification included CE (LVD + EMC), RoHS and ErP compliance, IP65 protection, 10KV surge protection and a 130V? Wait no. AC90-305V input range, suitable for a wide-range AC electrical supply.

The reported project result was a:

25% Energy-Saving Improvement

The 25% figure is a project-specific reported result. Actual energy savings for other industrial facilities depend on the existing lighting system, operating hours, fixture quantity, lighting requirements and control strategy.

Project at a Glance

Project Scope

The Saint-Étienne project was focused on upgrading lighting in industrial workshop areas.

The project configuration addressed four primary requirements:

01 — LED Lighting Replacement

Existing industrial lighting was upgraded with 200W LED Flood Lights.

02 — Lighting Efficiency

The selected LED configuration provides a specified luminous efficiency of:

135 lm/W

03 — Automatic Lighting Control

The lighting system incorporated:

Microwave Motion Sensor + Light Control + Timer Control

04 — Outdoor / Industrial Protection

The project specification included:

IP65 + 10KV Surge Protection + 1.5KV Voltage Resistance

Project Product

200W LIKELITE LED Flood Lights

The project used 200W LED Flood Lights with CREE SMD3030 LED technology.

Main Technical Configuration

LED: CREE SMD3030
Efficiency: 135 lm/W
Beam Angle: 120°
CCT: 5000K ±400K
CRI: Ra80
Input Voltage: AC90–305V
Frequency: 47–63Hz
IP Rating: IP65
Surge: 10KV
Voltage Resistance: 1.5KV
Lifespan: 30,000 hours

The 120° beam angle provides broad light distribution for suitable industrial workshop applications.

Final luminaire positioning, mounting height, spacing and quantity should be determined according to the actual workshop geometry and lighting calculation.

Smart Lighting Control

The project incorporated three control functions:

Microwave Motion Sensor

The microwave motion sensor can detect movement in designated areas and trigger the configured lighting response.

For industrial facilities, this type of control can be considered for areas with variable occupancy or intermittent use.

Light Control

Light control enables the lighting system to respond to ambient daylight conditions.

This can reduce unnecessary lighting operation when sufficient natural light is available.

Timer Control

Timer control provides scheduled operation based on the facility's operating requirements.

The three functions can be configured together:

Motion Detection + Ambient Light Detection + Time Scheduling

The final control logic depends on the actual facility operation and project requirements.

Project Engineering Services

LIKELITE's project service scope included lighting and electrical engineering support.

Lighting and Circuitry Design

Lighting and circuitry layouts can be developed according to the industrial workshop configuration, luminaire positions and electrical requirements.

Onsite Metering

Onsite measurement can be used to establish existing lighting and facility conditions before final system configuration.

Typical project data includes:

• Workshop dimensions

• Mounting height

• Existing luminaire positions

• Existing lighting performance

• Equipment arrangement

• Working areas

• Electrical conditions

DIALux Evo Layout

DIALux Evo can be used to model the industrial workshop and evaluate the proposed luminaire arrangement.

Typical calculations may include:

• Illuminance

• Uniformity

• Working-plane lighting

• Luminaire spacing

• Lighting distribution

• Potential dark areas

Actual project Lux, U0 or other calculation results should only be published when supported by the original project calculation file or report.

LitePro DLX Layout

LitePro DLX can be used for lighting layout and optical evaluation.

AutoCAD Layout

AutoCAD drawings can support:

• Luminaire positioning

• Lighting layouts

• Circuit planning

• Electrical documentation

• Installation drawings

AGi32 Layout

AGi32 can be used for additional lighting calculations and engineering verification where required.

Project Installation

Installation support can include:

• Luminaire installation

• Electrical connection

• Control-system installation

• Functional testing

• Lighting commissioning

Project Energy-Saving Result

25% Energy-Saving Improvement

The Saint-Étienne project reported a 25% energy-saving improvement after the lighting upgrade.

For engineering evaluation, this figure should be considered together with:

• Existing fixture wattage

• New fixture wattage

• Number of fixtures

• Operating hours

• Production schedule

• Lighting control

• Required illumination

• Existing lighting efficiency

Therefore, 25% is a reported result for this project, not a universal performance guarantee.

For a new industrial facility, LIKELITE should calculate the expected energy consumption based on the actual project conditions.

Project Electrical and Environmental Configuration

The project product specification included:

Input Voltage

AC90–305V

Frequency

47–63Hz

IP Protection

IP65

Surge Protection

10KV

Voltage Resistance

1.5KV

Operating Temperature

-20°C to +45°C

Lamp Body

Aluminum Alloy

Material

ALU + PC

This configuration is intended for industrial lighting applications where electrical protection and outdoor/industrial environmental resistance are required.

Project Certification

The project specification lists:

CE (LVD + EMC) / RoHS / ErP

These certifications and compliance requirements should be verified against the actual product documentation supplied for the project.

Where project documents are publicly available, the final page should connect the relevant certificates to the project record.

Project Delivery Data

Before & After Comparison

DIALux EVO Lighting Simulation Verification

Project Technical Specification

Why This Project Is Relevant to Industrial Lighting Buyers

The Saint-Étienne project provides a concrete reference for buyers evaluating industrial workshop lighting based on:

• 200W LED Flood Light configuration

• 1,000-set project scale

• 135 lm/W specified efficiency

• IP65 protection

• 10KV surge protection

• CREE SMD3030 LED

• Smart lighting control

• CE / RoHS / ErP compliance

• 2-year warranty

• Lighting design and simulation services

• Reported 25% energy-saving improvement

The project therefore provides a reference point for industrial lighting procurement rather than serving as a general industrial lighting tutorial.

FAQ — Saint-Étienne Industrial Lighting Project

1. Where is the LIKELITE industrial lighting project located?

The project is identified as an industrial workshop lighting upgrade in Saint-Étienne, France.

2. What type of facility was involved?

The application is identified as Industrial Workshops.

3. How many LED Flood Lights were supplied?

The project specification lists 1,000 sets.

4. What wattage was used?

The project used 200W LED Flood Lights.

5. What LED source was specified?

The product specification uses CREE SMD3030 LED.

6. What is the specified luminous efficiency?

The specified luminous efficiency is 135 lm/W.

7. What smart control system was used?

The project configuration includes:

Microwave Motion Sensor + Light Control + Timer Control.

8. What was the reported energy-saving improvement?

The project reported a 25% energy-saving improvement.

9. What is the input voltage?

The specified input voltage is AC90–305V.

10. What is the IP rating?

The project specification is IP65.

11. What certifications were specified?

The project specification lists CE (LVD + EMC), RoHS and ErP.

12. What is the warranty period?

The specified warranty is 2 years.

13. Can LIKELITE provide DIALux calculations for industrial projects?

Yes. LIKELITE can provide DIALux Evo layouts based on actual facility dimensions, mounting conditions and project lighting requirements.

14. Can LIKELITE support the installation of industrial LED lighting?

Yes. Project installation and commissioning support can be included according to project requirements.

15. Can the 25% energy-saving result be guaranteed for another factory?

No. The 25% figure is a reported result from the Saint-Étienne reference project. A new project requires separate evaluation based on the existing lighting system, operating hours, fixture quantity, control strategy and required lighting performance.

Request an Industrial Lighting Project

For EPC contractors, industrial engineering companies, lighting distributors, factory owners and project procurement teams, LIKELITE can support:

Project Assessment → Lighting Design → Simulation → Product Configuration → Smart Control → Bulk Supply → Installation

Recommended project information:

• Factory / Workshop Location

• Facility Dimensions

• Mounting Height

• Existing Lighting

• Existing Wattage

• Existing Fixture Quantity

• Working Areas

• Operating Hours

• Input Voltage

• Required Lighting Level

• Smart Control Requirements

• Certification Requirements

• Project Quantity

• Installation Requirements

LIKELITE

Outdoor LED Lighting Manufacturer & Project Solution Provider

LED Flood Lights | LED Street Lights | Solar Street Lights | LED Highway Lights | LED Stadium Lights | LED High Bay Lights | LED Wall Pack Lights

Submit Project Requirements → Engineering Evaluation → Project Configuration → Quotation