LIKELITE provides engineered Municipal Lighting Solutions for city streets, municipal roads, residential areas, public infrastructure, urban districts, pedestrian zones, parking areas and large-scale municipal lighting renovation programs.
Our municipal lighting service combines:
Existing Infrastructure Assessment → Onsite Metering → LED Street Light Selection → Smart Lighting Control → Lighting & Circuitry Design → Photometric Simulation → DIALux Evo → Litepro DLX → AGi32 → AutoCAD → Bulk Manufacturing → Installation Support
Municipal lighting projects require more than replacing conventional luminaires with LED products.
A practical municipal lighting solution needs to balance:
Lighting Performance + Energy Consumption + Smart Control + Electrical Safety + Environmental Protection + Maintenance + Project Cost
LIKELITE develops the lighting configuration around the actual municipal infrastructure and project requirements.
Municipal Lighting Challenges
Municipal lighting systems often operate across large road networks and public areas.
Typical challenges include:
High existing lighting energy consumption
Aging street light infrastructure
Long operating hours
Uneven lighting distribution
Different roadway widths
Existing pole and electrical infrastructure
Voltage fluctuation
Surge exposure
Outdoor weather conditions
Large numbers of lighting fixtures
Municipal energy-saving targets
Smart lighting requirements
Local and European compliance requirements
Long-term maintenance considerations
For a large municipal upgrade, the objective is not simply to install LED fixtures.
The objective is to establish a reliable, efficient and controllable municipal lighting system.
LIKELITE Municipal Lighting Solution
01 — Existing Infrastructure Assessment
Municipal lighting upgrades should begin with an understanding of the existing infrastructure.
LIKELITE can support assessment of:
Existing street lights
Pole height
Pole spacing
Road width
Lane configuration
Existing luminaire wattage
Mounting position
Electrical supply
Existing lighting performance
Operating schedule
Onsite Metering can be used where existing lighting data needs to be established before renovation.
This information provides the basis for product selection and lighting design.
02 — LED Street Light Selection
Municipal LED Street Lights should be selected according to the complete installation environment.
LIKELITE considers:
Road Width
Pole Height
Pole Spacing
Optical Distribution
Lighting Requirement
Electrical Condition
Control Strategy
For the Leuven municipal roadway lighting upgrade reference, the selected configuration is:
100W LED Street Lights
with:
130 lm/W luminous efficiency
IP66 protection
Lumileds SMD2835 LED
10KV surge protection
and:
220V–240V AC input
03 — Smart Municipal Lighting Control
The Leuven reference configuration incorporates:
Microwave Motion Sensor + Light Control + Timer Control
This combination can be used to manage municipal lighting according to operating conditions and scheduled requirements.
Microwave Motion Sensor
Provides motion-based detection for responsive lighting control.
Light Control
Supports automatic lighting operation according to ambient light conditions.
Timer Control
Allows lighting operation to follow predefined time schedules.
The control strategy can be configured according to the requirements of the municipal lighting system.
Smart control can help reduce unnecessary operating hours and support municipal energy-management objectives.
Leuven Municipal Lighting Upgrade Reference
Belgium · Leuven
| Project Reference | Specification |
|---|---|
| Location | Leuven, Belgium |
| Application | Municipal Road Lighting |
| Project Type | Municipal Lighting Upgrade |
| Product | LED Street Lights |
| Power | 100W |
| Quantity | 5,500 sets |
| Energy-Saving Improvement | 25% |
| Smart Control | Microwave Motion Sensor + Light Control + Timer Control |
| Warranty | 2 years |
| Input Voltage | 220V–240V AC |
| Efficiency | 130 lm/W |
| LED Source | Lumileds SMD2835 |
| Beam Angle | 120° |
| IP Rating | IP66 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| CCT | 5000K ±300K |
| CRI | Ra 80 |
| Lamp Body | Aluminum alloy |
| Material | ALU+PC |
| Lifespan | 30,000 hours |
| Frequency | 50Hz |
| Working Temperature | -20°C to 45°C |
| Certification | LVD 2014/35/EU / EMC 2014/30/EU / RoHS 2.0 2011/65/EU / ErP |
| Origin | Guangdong, China |
| Brand | LIKELITE |
The Leuven reference demonstrates how LED street lighting, smart control and municipal infrastructure can be combined into one upgrade configuration.
04 — Photometric Municipal Lighting Design
Municipal lighting design needs to account for the relationship between:
Roadway Geometry
Pole Arrangement
Luminaire Position
Optical Distribution
Required Lighting Performance
LIKELITE can provide photometric layouts using:
DIALux Evo
Litepro DLX
AGi32
The engineering design can also be supported with:
AutoCAD Layout
05 — Lighting & Circuitry Design
Municipal lighting systems require coordination between the luminaires and electrical infrastructure.
LIKELITE can support:
Lighting circuit configuration
Luminaire electrical requirements
Input voltage assessment
Existing infrastructure compatibility
Lighting control configuration
Surge protection requirements
Project layout drawings
For the Leuven reference configuration, the luminaire input voltage is:
220V–240V AC
with:
10KV Surge Protection
and:
1.5KV Voltage Resistance
06 — Energy Efficiency
The Leuven municipal lighting upgrade reference specifies:
25% Energy-Saving Improvement
Energy savings should be assessed based on the complete municipal lighting system.
Relevant factors include:
Existing luminaire wattage
New LED luminaire wattage
Number of fixtures
Annual operating hours
Lighting control strategy
Dimming or scheduled operation
Roadway configuration
Required lighting performance
The reference LED Street Light provides:
130 lm/W
combined with:
Smart Lighting Control
The combination of efficient LED lighting and operating control can provide a basis for municipal energy optimization.
The stated 25% improvement is the supplied project reference figure. Formal project reporting should use verified before-and-after energy data.
07 — Outdoor Protection
Municipal street lighting operates continuously under outdoor conditions.
The Leuven reference configuration includes:
IP66 Protection
Designed for outdoor municipal lighting applications.
10KV Surge Protection
Provides additional protection against electrical surge conditions.
Aluminum Alloy Housing
Provides a robust luminaire structure for outdoor installation.
-20°C to 45°C
Specified working temperature range.
08 — European Compliance
The supplied Leuven reference configuration includes:
LVD — 2014/35/EU
EMC — 2014/30/EU
RoHS 2.0 — 2011/65/EU
ErP
These compliance references should be supported by the corresponding product documentation when submitted for a specific municipal tender or procurement process.
09 — Municipal Lighting Engineering Services
LIKELITE can provide:
Lighting & Circuitry Design
Municipal lighting and circuitry planning.
Onsite Metering
Existing-system assessment and field measurements.
DIALux Evo Layout
Photometric lighting design.
Litepro DLX Layout
Lighting calculation and layout support.
AGi32 Layout
Professional photometric calculation.
AutoCAD Layout
Engineering drawings and lighting layouts.
Project Installation
Installation support for municipal lighting projects.
10 — Large-Scale Municipal Lighting Supply
The Leuven reference involves:
5,500 Sets
of:
100W LED Street Lights
For municipal procurement, consistent product specifications are essential across the entire supply.
LIKELITE can support:
Specification Confirmation
→
Engineering Design
→
Sample Approval
→
Bulk Manufacturing
→
Quality Control
→
Packaging
→
Delivery
→
Installation Support
This structure is suitable for municipal lighting renovation programs requiring large-volume supply.
Municipal Lighting Solution Workflow
STEP 01 — Municipal Requirements
Road network / application / quantity / energy target
↓
STEP 02 — Existing Infrastructure
Pole / roadway / electrical / lighting assessment
↓
STEP 03 — Onsite Metering
Existing lighting and energy baseline
↓
STEP 04 — Product Selection
LED Street Light / power / optics / IP / surge
↓
STEP 05 — Smart Control
Motion Sensor / Light Control / Timer Control
↓
STEP 06 — Photometric Design
DIALux Evo / Litepro DLX / AGi32
↓
STEP 07 — Engineering Drawings
AutoCAD / Lighting & Circuitry Design
↓
STEP 08 — Manufacturing & Delivery
Bulk production / QC / packaging / logistics
↓
STEP 09 — Installation & Verification
Installation / lighting verification / energy evaluation
Municipal Lighting Solution Technical Data
| Parameter | Specification |
|---|---|
| Product | LED Street Lights |
| Power | 100W |
| Efficiency | 130 lm/W |
| Input Voltage | 220V–240V AC |
| IP Rating | IP66 |
| LED Source | Lumileds SMD2835 |
| Beam Angle | 120° |
| Surge | 10KV |
| Voltage Resistance | 1.5KV |
| CCT | 5000K ±300K |
| CRI | Ra 80 |
| Material | ALU+PC |
| Lamp Body | Aluminum alloy |
| Lifespan | 30,000 hours |
| Power Supply | AC |
| Frequency | 50Hz |
| Working Temperature | -20°C to 45°C |
| Smart Control | Microwave Motion Sensor + Light Control + Timer Control |
| Certification | LVD / EMC / RoHS 2.0 / ErP |
| Warranty | 2 years |
| Origin | Guangdong, China |
| Brand | LIKELITE |
Municipal Lighting Solutions FAQ
1. What is a municipal lighting solution?
A municipal lighting solution is a complete lighting and engineering system designed for city roads, public infrastructure and municipal lighting networks.
2. What is included in a LIKELITE municipal lighting solution?
Services can include onsite metering, LED Street Light selection, lighting and circuitry design, photometric calculation, smart control configuration, AutoCAD layouts and installation support.
3. Can LIKELITE upgrade existing municipal street lights?
Yes. Existing infrastructure assessment and onsite metering can be incorporated into municipal lighting renovation projects.
4. What LED Street Light is used in the Leuven reference?
The reference configuration uses 100W LED Street Lights.
5. How many luminaires are included in the Leuven reference?
The supplied reference specifies 5,500 sets.
6. What is the stated energy-saving improvement?
The supplied reference specifies a 25% energy-saving improvement.
7. Does the solution support smart lighting control?
Yes. The Leuven reference includes Microwave Motion Sensor + Light Control + Timer Control.
8. What is the luminous efficiency?
The specified luminous efficiency is 130 lm/W.
9. What IP rating does the LED Street Light have?
The reference configuration uses IP66 protection.
10. What surge protection is provided?
The specified surge protection is 10KV.
11. Can LIKELITE provide DIALux Evo calculations?
Yes. LIKELITE supports DIALux Evo, Litepro DLX and AGi32 layouts.
12. Can LIKELITE provide AutoCAD drawings?
Yes. AutoCAD layouts can be provided as part of the engineering service.
13. What certifications are specified?
The supplied configuration references LVD 2014/35/EU, EMC 2014/30/EU, RoHS 2.0 2011/65/EU and ErP.
14. What is the warranty period?
The reference specification provides a 2-year warranty.
15. Can LIKELITE supply large municipal lighting programs?
Yes. The Leuven reference involves 5,500 sets, and LIKELITE can support large-volume municipal LED lighting supply and engineering coordination.
Request a Municipal Lighting Solution
Planning a municipal street lighting upgrade?
Send LIKELITE:
Road Layout + Pole Height + Pole Spacing + Existing Lighting + Quantity + Energy Target + Control Requirements
LIKELITE can evaluate the appropriate LED Street Light configuration and municipal lighting engineering requirements.
LIKELITE
LED Outdoor Lighting Manufacturer & Engineering Solution Provider
