Smart Lighting Projects/Piraeus, Greece Urban Smart Lighting Upgrade

LIKELITE supplied LED street lighting equipment and project support for an urban smart lighting upgrade in Piraeus, Greece.

The project involved the deployment of 5,000 sets of 100W LED Street Lights for urban roadway applications, combined with microwave motion sensing, light control and timer control.

The project configuration was developed for an outdoor municipal road environment requiring efficient LED lighting, intelligent operation and weather-resistant equipment.


Project Overview

Project ItemProject Information
ProjectPiraeus Urban Smart Lighting Upgrade
LocationPiraeus, Greece
Project TypeUrban Road Smart Lighting
ProductLED Street Lights
Quantity5,000 sets
Rated Power100W
Smart ControlMicrowave Motion Sensor + Light Control + Timer Control
CertificationCE / ERP
Warranty2 years
Reported Energy-Saving Improvement20%
BrandLIKELITE
OriginGuangdong, China

The project was structured around LED street lighting replacement together with intelligent control functions for urban road operation.


Project Scope

The Piraeus project included the supply and implementation support of LED street lighting equipment for an urban roadway lighting upgrade.

The project scope covered:

  • LED street light supply

  • Urban roadway lighting configuration

  • Lighting and circuitry design

  • Onsite metering

  • Lighting simulation

  • Smart control configuration

  • Project installation

  • System commissioning support

The final installation and engineering scope was determined according to the project requirements and agreed responsibilities.


LED Street Light Configuration

The project used a 100W LED Street Light configuration.

The main technical parameters were:

Technical ParameterProject Configuration
Input Voltage185–265V AC
Power SupplyAC
Power100W
Light SourceLumileds SMD2835 LED
Lamp Luminous Efficiency130 lm/W
IP RatingIP66
Surge Protection10KV
Voltage Resistance1.5KV
CCT5000K ±300K
CRIRa80
Frequency50Hz
Lamp BodyAluminum Alloy
Lifespan30,000 hours
Working Temperature-20°C to +55°C
CertificationCE / ERP
Warranty2 years

The product configuration was selected for outdoor urban roadway use, with IP66 protection and aluminum alloy construction.


Intelligent Lighting Control

A key part of the project was the integration of three lighting control functions:

Microwave Motion Sensor

The microwave motion sensor provides movement-based control according to the configured operating strategy.

This function can be used where road activity changes significantly during different periods of the night.

Light Control

Light control allows the lighting system to respond to ambient light conditions.

This supports automatic switching according to the configured operating requirements.

Timer Control

Timer control provides scheduled lighting operation.

The operating schedule can be configured according to project requirements, including different lighting periods during the night.

Combined Control Strategy

The three functions can be coordinated as part of the overall smart lighting operating strategy:

Ambient Light → Scheduled Operation → Road Activity → Lighting Response

The actual control parameters depend on the project commissioning requirements.


Lighting & Circuitry Design

For the Piraeus urban roadway upgrade, lighting and circuitry design formed part of the project service scope.

The engineering process can include:

  • Roadway lighting layout

  • Luminaire positioning

  • Circuit arrangement

  • Power supply considerations

  • Control system arrangement

  • Surge protection

  • Installation planning

The purpose is to coordinate lighting performance and electrical operation before field installation.


Onsite Metering

Onsite metering was included in the project service scope.

Field information can be used to verify existing conditions such as:

  • Road dimensions

  • Pole spacing

  • Pole height

  • Existing luminaire positions

  • Road geometry

  • Existing lighting conditions

  • Electrical conditions

This information provides a practical basis for the final lighting layout and equipment configuration.


Lighting Simulation

LIKELITE's project service scope included professional lighting layout and calculation support.

The project could use:

DIALux Evo Layout
For roadway modeling, luminaire positioning and lighting calculation.

LitePro DLX Layout
For luminaire layout and lighting analysis.

AutoCAD Layout
For roadway layouts, pole positions and engineering drawings.

AGI32 Layout
For additional lighting calculation and engineering verification.

The purpose of these tools is to verify the proposed lighting arrangement against the actual project geometry before installation.


Project Installation

Project installation was included in the lighting solutions service scope.

Typical implementation activities included:

Site Assessment → Lighting Layout → Product Supply → Installation → Electrical Connection → Smart Control Setup → Commissioning → Project Handover

The exact installation responsibilities depend on the project agreement.

For a municipal roadway upgrade, coordination between the lighting supplier, EPC contractor and project owner is important during installation and commissioning.


Project Energy-Saving Result

The Piraeus project reported a 20% improvement in energy-saving performance following the smart LED lighting upgrade.

The reported result is associated with this specific project configuration and operating conditions.

Actual energy savings in other urban lighting projects may vary depending on:

  • Existing lamp technology

  • Existing power consumption

  • Operating hours

  • Traffic patterns

  • Dimming strategy

  • Motion detection settings

  • Timer settings

  • Local operating requirements

Therefore, the 20% figure should be treated as a project-specific reported result, rather than a universal performance guarantee.


Project Scale

The project involved:

5,000 Sets

of

100W LED Street Lights

with:

130 lm/W

lamp luminous efficiency and:

IP66

outdoor protection.

The combination of large project quantity and intelligent control makes this application relevant to municipal buyers and EPC contractors evaluating large-scale urban roadway upgrades.


Certification & Protection

The project configuration was specified with:

CE / ERP

certification.

The luminaire configuration also included:

  • IP66 protection

  • 10KV surge protection

  • 1.5KV voltage resistance

  • Aluminum alloy housing

  • -20°C to +55°C working temperature

These specifications are relevant for outdoor roadway lighting installations exposed to weather and electrical operating conditions.


Project Documentation

For a complete project case presentation, the following evidence can be added to this page where available:

  • Project site photographs

  • Before / During / After installation photographs

  • Actual installation photographs

  • Night-time roadway photographs

  • DIALux Evo calculation reports

  • Lighting layout drawings

  • AutoCAD drawings

  • AGI32 calculation results

  • Product delivery records

  • Installation records

  • Commissioning records

  • Project completion documentation

  • Customer acceptance documentation

Only actual project documentation should be published as project evidence.


Why This Project Matters to Buyers

The Piraeus project provides a useful reference for buyers evaluating large-scale smart roadway lighting procurement.

The project demonstrates a combination of:

5,000 Sets + 100W LED Street Lights + 130 lm/W + IP66 + 10KV Surge Protection + Intelligent Control + Lighting Design + Installation Support

For EPC contractors, the project provides a reference for evaluating a supplier capable of supporting both product supply and engineering services.

For municipal procurement teams, the project provides a reference configuration for evaluating LED replacement and intelligent control strategies.

For lighting distributors and project buyers, the 5,000-set scale demonstrates LIKELITE's capability for bulk project supply.


Piraeus Smart Lighting Project — Buyer Data Sheet

Location: Piraeus, Greece
Application: Urban Road Lighting
Project Type: Smart Lighting Upgrade
Product: LED Street Lights
Quantity: 5,000 sets
Power: 100W
Efficiency: 130 lm/W
LED: Lumileds SMD2835
Protection: IP66
Surge: 10KV
Voltage Resistance: 1.5KV
CCT: 5000K ±300K
CRI: Ra80
Control: Microwave Motion Sensor + Light Control + Timer Control
Certification: CE / ERP
Warranty: 2 years
Reported Energy-Saving Improvement: 20%
Working Temperature: -20°C to +55°C
Engineering Services: Lighting & Circuitry Design, Onsite Metering, DIALux Evo, LitePro DLX, AutoCAD, AGI32, Project Installation


Before & After Comparison



DIALux EVO Lighting Simulation Verification


Smart Lighting Project FAQ

1. Where was the LIKELITE smart lighting project located?

The reference project was an urban road smart lighting upgrade in Piraeus, Greece.

2. How many LED street lights were supplied?

The project quantity was 5,000 sets.

3. What wattage was used?

The project used 100W LED Street Lights.

4. What LED chip was used?

The project configuration used Lumileds SMD2835 LED.

5. What was the luminous efficiency?

The specified lamp luminous efficiency was 130 lm/W.

6. What intelligent control functions were used?

The project included Microwave Motion Sensor, Light Control and Timer Control.

7. What was the IP rating?

The LED street light configuration was IP66 rated.

8. What surge protection was specified?

The project configuration included 10KV surge protection.

9. What certifications were specified?

The reference configuration was specified with CE and ERP certification.

10. What was the product warranty?

The project specification included a 2-year warranty.

11. What energy-saving result was reported?

The project reported a 20% improvement in energy-saving performance.

12. Is 20% energy saving guaranteed for every project?

No. The 20% result is specific to the Piraeus project and its operating conditions. Results for other projects depend on the existing lighting system and operating strategy.

13. Did the project include lighting calculations?

Yes. The project service scope included DIALux Evo, LitePro DLX, AutoCAD and AGI32 lighting layout support.

14. Did LIKELITE provide onsite metering?

Yes. Onsite metering was included in the project service scope.

15. Can LIKELITE supply similar large-scale smart lighting projects?

Yes. LIKELITE can evaluate similar municipal and urban roadway projects based on road layout, pole information, quantity, voltage, lighting requirements and intelligent control requirements.


Request a Similar Smart Lighting Project

If you are planning a municipal or urban roadway lighting upgrade, send LIKELITE:

Road Layout + Pole Height + Pole Spacing + Existing Lighting Information + Required Quantity + Input Voltage + Control Requirements

LIKELITE can evaluate the project requirements and prepare an appropriate LED Smart Lighting configuration for bulk project supply.

LIKELITE — Outdoor LED Lighting Solutions for International Projects