2,000 Sets of 120W LED Roadway Lights with Smart Lighting Control
LIKELITE supplied a smart roadway lighting solution for an urban road lighting upgrade project in Vancouver, Canada, combining high-efficiency LED Roadway Lights with microwave motion sensing, light control and timer control.
The project scope included 2,000 sets of 120W LED Roadway Lights, with CSA certification, IP66 protection and 10KV surge protection.
The smart lighting system was designed to improve roadway lighting efficiency and reduce unnecessary lighting operation. Based on the project information, the lighting upgrade achieved an estimated 35% energy-saving improvement.
This project demonstrates LIKELITE's capability to supply LED roadway lighting Products together with lighting design, on-site metering, lighting simulation and project installation support for large-scale urban infrastructure Projects.
Project Overview
Project Item
Project Information
Project Type
Urban Roadway Smart Lighting Upgrade
Location
Vancouver, Canada
Product
LED Roadway Lights
Quantity
2,000 sets
Rated Power
120W
Certification
CSA
Warranty
3 Years
Energy Saving
35%
Smart Control
Microwave Motion Sensor + Light Control + Timer Control
IP Rating
IP66
Surge Protection
10KV
Input Voltage
110–120V AC
Frequency
60Hz
LED Source
Lumileds SMD3030 LED
Luminous Efficiency
125 lm/W
CCT
5000K ± 500K
CRI
Ra 80
Housing
Aluminum Alloy
Lifespan
30,000 Hours
Working Temperature
-20°C to +55°C
Origin
Guangdong, China
Brand
LIKELITE
Project Background
Urban roadway lighting systems are required to operate reliably across changing traffic, environmental and operating conditions.
For roadway lighting upgrade projects, replacing existing luminaires with LED technology is only one part of the engineering work.
The project also requires consideration of:
Existing roadway conditions
Lighting operating schedules
Ambient light
Traffic and movement patterns
Lighting distribution
Electrical circuitry
Surge protection
Installation conditions
Long-term maintenance
Energy consumption
For the Vancouver project, LIKELITE supplied a 120W LED roadway lighting system combined with intelligent control functions.
The project approach focused on upgrading both the lighting hardware and the lighting control method.
Project Scope
The Vancouver urban roadway upgrade included:
LED Roadway Lighting
2,000 sets of 120W LED Roadway Lights were specified for the roadway lighting upgrade.
The luminaire uses Lumileds SMD3030 LED technology and provides a specified luminous efficiency of 125 lm/W.
Smart Lighting Control
The lighting system integrates:
Microwave Motion Sensor + Light Control + Timer Control
The three control functions provide different layers of lighting management.
Engineering Design
The project service scope includes:
Lighting and Circuitry Design
Onsite Metering
DIALux Evo Layout
Litepro DLX Layout
AutoCAD Layout
AGi32 Layout
Project Installation
This enables the lighting product and engineering design to be considered as one project package.
Existing Lighting Upgrade Requirements
The objective of the project was not simply to change the lamp type.
The upgrade required a lighting system capable of providing:
Efficient LED Lighting + Intelligent Control + Engineering Design + Project Installation
The project requirements included:
Upgrade the roadway lighting system to LED technology.
Maintain reliable operation under outdoor environmental conditions.
Provide CSA-certified lighting equipment for the Canadian application.
Improve energy efficiency.
Introduce intelligent lighting control.
Provide professional roadway lighting design support.
Provide lighting calculation and layout capability.
Support project installation.
Project Product
120W LED Roadway Lights
The selected roadway luminaire is a 120W LED Roadway Light designed for outdoor roadway applications.
The product configuration includes:
Lumileds SMD3030 LED
125 lm/W luminous efficiency
5000K ± 500K color temperature
Ra 80 color rendering
Aluminum alloy housing
IP66 protection
10KV surge protection
1.5KV voltage resistance
30,000-hour rated lifespan
110–120V AC input
60Hz operating frequency
The product is specified for an operating temperature range of -20°C to +55°C.
Smart Lighting Control Architecture
Microwave Motion Sensor
The microwave motion sensor provides movement detection for the roadway lighting system.
Depending on the configured control logic, lighting output can respond to detected movement rather than remaining at the same operating level throughout the entire operating period.
This is particularly relevant to roadway applications where traffic and activity can vary during different periods of the day.
Light Control
Light control provides automatic response to ambient lighting conditions.
The system can use available natural light as one of the operating conditions for determining whether roadway lighting should be activated.
This helps prevent unnecessary lighting operation during periods when sufficient ambient illumination is available.
Timer Control
Timer control establishes predefined operating schedules.
The project operator can define operating periods according to the roadway's required lighting schedule.
Timer control also provides a predictable operating framework for the lighting system.
Integrated Control
The three functions can operate as a combined control strategy:
The actual control parameters should be configured according to the final project design, local requirements and operating conditions.
Engineering Design & Project Implementation
01 — Onsite Metering
On-site lighting measurements can be conducted to understand existing roadway lighting conditions.
Measured information can support the development of the proposed lighting layout and provide a reference for project evaluation.
02 — Roadway Lighting Design
LIKELITE can develop the roadway lighting arrangement according to:
Road width
Pole height
Pole spacing
Mounting position
Luminaire distribution
Roadway classification
Required lighting performance
03 — DIALux Evo Layout
DIALux evo can be used to model the proposed roadway lighting arrangement and evaluate the lighting distribution before installation.
Where project documentation requires calculation results, the corresponding DIALux files and reports can form part of the engineering documentation.
04 — Litepro DLX Layout
Litepro DLX layout support is available where required by the project design workflow.
05 — AutoCAD Layout
AutoCAD layouts can be prepared for:
Pole positions
Luminaire positions
Roadway layout
Lighting arrangement
Electrical routing
06 — AGi32 Layout
AGi32 calculation and layout support can be provided for projects using AGi32 as part of their lighting engineering workflow.
07 — Project Installation
Project installation can be supported according to the agreed project scope and site conditions.
Installation activities may include:
Luminaire installation
Electrical connection
Control system integration
System configuration
Functional testing
Commissioning support
Project Results
35% Energy-Saving Improvement
The Vancouver project achieved an indicated 35% energy-saving improvement.
The energy-saving result is associated with the combination of:
LED Efficiency + Smart Lighting Control + Operating Schedule Management
Rather than relying solely on LED replacement, the project integrates lighting hardware with intelligent control.
This approach can reduce unnecessary lighting operation during periods of lower lighting demand.
Project Technical Performance
The supplied lighting system provides the following specified characteristics:
125 lm/W luminous efficiency
The 120W luminaire provides a specified output efficiency of 125 lm/W.
IP66 protection
The IP66-rated housing is designed for outdoor roadway applications and protection against dust and water ingress.
10KV surge protection
The luminaire incorporates 10KV surge protection for improved protection against electrical surge conditions.
1.5KV voltage resistance
The product specification includes 1.5KV voltage resistance.
30,000-hour lifespan
The specified LED roadway light has a rated lifespan of 30,000 hours.
-20°C to +55°C operating temperature
The luminaire is specified for operation within the stated temperature range.
Project Value for Municipal and EPC Buyers
For Municipal Projects
The project model provides a practical approach for municipal roadway lighting upgrades where energy efficiency and operational control are important considerations.
For EPC Contractors
The project demonstrates a combined supply model covering:
