LIKELITE provides smart lighting solutions for urban roads, municipal streets, arterial roads, intersections and public infrastructure projects.
Our smart roadway lighting systems combine LED roadway lights, microwave motion sensing, photocell/light control, timer control and professional lighting design to reduce energy consumption while maintaining reliable roadway illumination.
For the Vancouver urban roadway lighting upgrade reference, LIKELITE supplied 2,000 sets of 120W LED Roadway Lights with CSA certification, IP66 protection and a smart control system integrating microwave motion sensor, light control and timer control. The project achieved an energy-saving improvement of approximately 35%.
The solution is designed for municipalities, EPC contractors, electrical contractors, lighting distributors and infrastructure project owners requiring a complete roadway lighting upgrade rather than standalone LED fixtures.
Smart Roadway Lighting Solution
Traditional roadway lighting systems often operate at fixed output regardless of traffic volume, pedestrian activity or ambient light conditions.
A smart roadway lighting solution allows the lighting system to respond to actual operating conditions.
LIKELITE combines:
High-efficiency LED roadway luminaires
Microwave motion detection
Ambient light control
Timer-based control
Professional roadway lighting simulation
On-site illumination measurement
Electrical and lighting circuitry design
Project installation support
The objective is not simply to replace existing lamps with LED fixtures.
The objective is to create a more controllable, measurable and energy-efficient roadway lighting system.
Vancouver Urban Roadway Lighting Upgrade Reference
Project Application
Application: Urban Roadway Lighting Upgrade
Location: Vancouver, Canada
Product: LED Roadway Lights
Quantity: 2,000 sets
Power: 120W
Certification: CSA
Warranty: 3 Years
Energy Saving: 35%
Control System: Microwave Motion Sensor + Light Control + Timer Control
IP Rating: IP66
Surge Protection: 10KV
This project reference demonstrates how smart controls can be integrated into a large-scale urban roadway lighting upgrade.
The system was designed around three primary control functions:
Motion-based response → Ambient light detection → Scheduled operation
This approach allows the roadway lighting system to operate according to actual environmental and usage conditions rather than relying only on fixed operating hours.
Smart Lighting Control System
Microwave Motion Sensor
The microwave motion sensor provides intelligent detection of movement around the roadway environment.
When movement is detected, the lighting system can respond according to the configured control strategy.
This can help reduce unnecessary full-output operation during periods of low traffic activity.
Light Control
The light control function responds to ambient illumination conditions.
The system can automatically manage lighting operation according to available natural light, helping prevent unnecessary operation during daylight conditions.
Timer Control
Timer control provides scheduled lighting operation based on predefined operating periods.
This allows project engineers or operators to establish different lighting schedules according to roadway requirements, operating hours and local conditions.
Combined Control Strategy
The three functions can be integrated into one smart roadway lighting strategy:
Ambient Light → Timer Schedule → Motion Detection → Lighting Response
The exact control logic should be configured according to the roadway classification, traffic conditions, local regulations and lighting design requirements.
120W LED Roadway Light Specification
| Parameter | Specification |
|---|---|
| Product | LED Roadway Lights |
| Brand | LIKELITE |
| Rated Power | 120W |
| Input Voltage | 110–120V AC |
| Frequency | 60Hz |
| Certification | CSA |
| IP Rating | IP66 |
| Surge Protection | 10KV |
| Voltage Resistance | 1.5KV |
| LED Source | Lumileds SMD3030 LED |
| Luminous Efficiency | 125 lm/W |
| Color Temperature | 5000K ± 500K |
| Color Rendering Index | Ra ≥80 |
| Housing Material | Aluminum Alloy |
| Rated Lifespan | 30,000 Hours |
| Power Supply | AC |
| Working Temperature | -20°C to +55°C |
| Warranty | 3 Years |
Lighting Design and Engineering Services
A smart roadway lighting system requires more than selecting the correct wattage.
LIKELITE provides engineering-oriented lighting design and project support for roadway lighting applications.
Lighting & Circuitry Design
We develop lighting and electrical circuitry concepts according to the roadway layout, pole arrangement, fixture configuration and project requirements.
On-Site Metering
On-site illumination measurement can be used to establish existing lighting conditions before the upgrade.
Measured data can then support the lighting upgrade design and verification process.
DIALux evo Layout
Roadway lighting layouts can be developed using DIALux evo to evaluate the proposed luminaire arrangement and lighting distribution.
Litepro DLX Layout
Litepro DLX layout services can be used where required by the project's lighting engineering workflow.
AutoCAD Layout
AutoCAD drawings can be prepared for roadway lighting layouts, pole positions, fixture arrangements and related engineering documentation.
AGi32 Layout
AGi32 lighting calculation support is available for projects requiring AGi32-based lighting simulation and analysis.
Project Installation
LIKELITE can support the project installation process according to the agreed project scope, technical requirements and site conditions.
Roadway Lighting Design Workflow
01. Existing Site Assessment
Review the existing roadway lighting system, pole spacing, road geometry, existing luminaires and electrical conditions.
02. On-Site Metering
Collect existing illumination data where required.
03. Roadway Classification
Define the lighting requirements according to the roadway type, traffic conditions and applicable local standards.
04. Luminaire Selection
Select the appropriate LED roadway light based on required power, optical distribution, mounting height and lighting performance.
05. Smart Control Strategy
Define the appropriate combination of:
Microwave Motion Sensor + Light Control + Timer Control
06. Lighting Simulation
Develop the lighting calculation and layout using the required engineering platform, such as DIALux evo, Litepro DLX, AutoCAD or AGi32.
07. Electrical & Circuit Design
Develop the required lighting circuitry and electrical configuration.
08. Installation
Implement the approved lighting system according to the project installation requirements.
09. Commissioning
Verify the lighting system, control functions and operating schedule after installation.
Why Smart Lighting for Urban Roads?
Reduced Energy Consumption
Intelligent control reduces unnecessary lighting operation and can improve the overall energy performance of roadway lighting systems.
The Vancouver reference project achieved approximately 35% energy savings.
Better Lighting Management
Smart controls provide greater flexibility than fixed-output lighting operation.
Municipal operators can configure lighting behavior according to actual operating requirements.
Reduced Unnecessary Operation
Motion sensing, ambient light detection and scheduled control can reduce unnecessary full-output operation during low-demand periods.
Improved System Visibility
A structured lighting design and control strategy provides a clearer technical basis for operating and maintaining the roadway lighting system.
Long-Term Upgrade Potential
A smart lighting architecture can provide a foundation for future roadway lighting management and control upgrades.
Applications
LIKELITE Smart Lighting Solutions can be applied to:
Urban Roads
Municipal Streets
Residential Roads
Arterial Roads
Collector Roads
Intersections
Pedestrian Roadways
Industrial Roads
Public Infrastructure
Parking Areas
Campus Roads
Commercial Developments
Highway Access Roads
Designed for Professional Project Buyers
LIKELITE smart roadway lighting solutions are designed for organizations purchasing and implementing lighting systems at project scale.
Municipalities
For municipal roadway renovation, energy-saving programs and public infrastructure upgrades.
EPC Contractors
For EPC contractors requiring lighting products, design support, technical documentation and project installation assistance.
Electrical Contractors
For contractors responsible for roadway lighting installation and electrical integration.
Lighting Distributors
For distributors requiring CSA-oriented roadway lighting products and customized project support.
Lighting Brands
For lighting brands requiring OEM/ODM roadway lighting products and smart control integration.
Engineering Companies
For engineering companies requiring lighting simulation, layout and technical documentation.
Why LIKELITE
LIKELITE is a professional outdoor LED lighting manufacturer and project solution provider based in Guangdong, China.
Our roadway lighting solutions combine product manufacturing with engineering support.
Product Capability
LED Roadway Lights
Solar Street Lights
LED High Bay Lights
LED Wall Pack Lights
Solar Garden Lights
Engineering Capability
Lighting & Circuitry Design
On-Site Metering
DIALux evo Layout
Litepro DLX Layout
AutoCAD Layout
AGi32 Layout
Project Installation Support
Project-Oriented Manufacturing
LIKELITE supports bulk project orders, OEM/ODM requirements, engineering projects and customized outdoor LED lighting solutions.
Technical Project Data
Project: Vancouver Urban Roadway Smart Lighting Upgrade
Product: 120W LED Roadway Lights
Quantity: 2,000 sets
Certification: CSA
Warranty: 3 Years
Energy Saving: 35%
Control: Microwave Motion Sensor + Light Control + Timer Control
Input: 110–120V AC
Efficiency: 125 lm/W
Protection: IP66
Surge: 10KV
LED: Lumileds SMD3030
CCT: 5000K ± 500K
CRI: Ra ≥80
Operating Temperature: -20°C to +55°C
Smart Lighting Solutions vs. Smart Lighting Projects
Smart Lighting Solutions
This page explains how LIKELITE designs and delivers smart roadway lighting systems.
It focuses on:
Lighting technology
Control architecture
Engineering design
Simulation
Electrical design
Installation methodology
Application scenarios
Buyer requirements
Smart Lighting Projects
A project page should focus on one specific completed or ongoing project.
It should provide project-specific evidence such as:
Project location
Client/project owner
Installation photos
Before/after conditions
Pole layout
DIALux calculation results
Measured lux data
Installation records
Commissioning records
Completion documentation
Actual project video
Therefore, this Smart Lighting Solutions page functions as the solution authority page, while individual project pages function as project evidence pages.
FAQ
1. What is a smart roadway lighting solution?
A smart roadway lighting solution combines LED roadway luminaires with intelligent control functions such as motion sensing, ambient light control and timer-based operation.
2. How can smart roadway lighting reduce energy consumption?
The system can reduce unnecessary lighting operation by adjusting lighting behavior according to ambient light, operating schedules and detected movement. Actual savings depend on the existing system, operating profile, roadway conditions and control strategy.
3. What smart controls does the Vancouver solution use?
The reference solution uses microwave motion sensor, light control and timer control.
4. What power is used for the Vancouver roadway lighting solution?
The reference project uses 120W LED Roadway Lights.
5. How many LED roadway lights were supplied?
The Vancouver reference project includes 2,000 sets.
6. Is the roadway light CSA certified?
The supplied roadway lighting product is specified with CSA certification for the referenced Canadian application.
7. What is the IP rating?
The LED roadway light has an IP66 protection rating.
8. What surge protection is provided?
The specified roadway light provides 10KV surge protection.
9. Can LIKELITE provide roadway lighting simulation?
Yes. LIKELITE can provide lighting layout and calculation support using DIALux evo, Litepro DLX and AGi32, together with AutoCAD layout services.
10. Can LIKELITE provide on-site lighting measurement?
Yes. On-site metering can be included within the lighting solution service according to project requirements.
11. Can LIKELITE provide electrical and circuitry design?
Yes. Lighting and circuitry design can be included as part of the project engineering service.
12. Can smart controls be customized?
Yes. Control logic can be configured according to roadway conditions, lighting requirements, operating schedules and project specifications.
13. What is the warranty period?
The specified Vancouver solution includes a 3-year warranty.
14. What is the LED source used in this solution?
The specified product uses Lumileds SMD3030 LED technology.
15. Can LIKELITE support project installation?
Yes. Project installation support can be provided according to the agreed project scope and site requirements.
Request a Smart Roadway Lighting Solution
Planning an urban roadway lighting upgrade?
Send LIKELITE your:
Road layout
Existing pole spacing
Pole height
Existing luminaire information
Road width
Project quantity
Required lighting standard
Control requirements
Project location
LIKELITE can evaluate the project requirements and develop a suitable LED Roadway Lighting + Smart Control + Lighting Design solution.
LIKELITE — Outdoor LED Lighting Solutions for Global Engineering Projects.
