LIKELITE provides smart lighting solutions for urban roads, municipal streets, arterial roads, residential roads, intersections and public infrastructure projects.
Our smart roadway lighting systems combine LED Roadway Lights, microwave motion sensing, ambient light control and timer control with professional lighting design and engineering services.
The solution is designed for municipalities, EPC contractors, electrical contractors, engineering companies, lighting distributors and project owners that require more than a conventional LED luminaire replacement.
A reference application in Alexandria, Egypt used 2,500 sets of 100W LED Roadway Lights with EOS certification, IP65 protection and a smart control system integrating Microwave Motion Sensor + Light Control + Timer Control.
The reference project reported an energy-saving improvement of approximately 30%.
Smart Roadway Lighting System
A roadway lighting upgrade should consider the complete lighting system rather than the luminaire alone.
LIKELITE's smart lighting approach combines four technical layers:
01. LED Lighting
High-efficiency LED Roadway Lights provide the primary illumination.
02. Intelligent Detection
Microwave motion sensing allows the lighting system to respond to movement conditions.
03. Environmental & Time Control
Light control and timer control manage lighting operation according to ambient conditions and predefined schedules.
04. Engineering Design
Lighting simulation, on-site measurement, circuitry design and installation support connect the lighting products with the actual roadway environment.
The result is a project-oriented lighting system designed around:
Lighting Performance + Energy Efficiency + Intelligent Control + Engineering Delivery
Alexandria Urban Roadway Lighting Reference
Egypt Smart Roadway Lighting Upgrade
The Alexandria reference application demonstrates the configuration of a large-scale urban roadway lighting upgrade using intelligent lighting control.
| Project Reference | Specification |
|---|---|
| Application | Urban Roadway Smart Lighting Upgrade |
| Location | Alexandria, Egypt |
| Product | LED Roadway Lights |
| Quantity | 2,500 sets |
| Rated Power | 100W |
| Certification | EOS |
| Warranty | 2 Years |
| Energy Saving | 30% |
| Smart Control | Microwave Motion Sensor + Light Control + Timer Control |
| Input Voltage | 220V AC |
| IP Rating | IP65 |
| Surge Protection | 10KV |
| LED Source | Lumileds SMD2835 |
| Efficiency | 120 lm/W |
| CCT | 5000K ± 500K |
| CRI | Ra 80 |
| Housing | Aluminum Alloy |
| Lifespan | 30,000 Hours |
| Frequency | 50Hz |
| Working Temperature | -20°C to +55°C |
This reference is used to demonstrate the solution configuration and engineering capability. Detailed project evidence should be presented separately on the corresponding Smart Lighting Projects page.
Intelligent Lighting Control
Microwave Motion Sensor
Microwave motion sensing provides movement detection for the roadway lighting system.
The control system can respond to detected movement according to the configured project logic.
This makes it possible to operate roadway lighting according to actual usage conditions instead of maintaining the same lighting behavior throughout the entire operating period.
The final sensor sensitivity, detection range and control response should be determined according to roadway geometry, installation height, traffic conditions and project requirements.
Light Control
Light Control manages the lighting system according to ambient illumination.
The system can distinguish between daytime and nighttime operating conditions and prevent unnecessary lighting operation when sufficient natural light is available.
This function is particularly useful for municipal roadway lighting where lighting schedules need to respond to seasonal changes in daylight conditions.
Timer Control
Timer Control provides scheduled operation based on predefined time periods.
The project operator can configure lighting operation according to:
Road usage
Traffic patterns
Operating hours
Local requirements
Municipal lighting schedules
Timer control also provides a predictable operating framework for the roadway lighting system.
Combined Smart Control Strategy
The three control functions can be integrated into a coordinated roadway lighting strategy:
Ambient Light → Timer Schedule → Motion Detection → Lighting Response
For example, the lighting system can use ambient light to determine whether illumination is required, timer control to establish the operating schedule, and motion sensing to determine whether additional lighting response is required.
The actual control logic must be configured according to the final lighting design, roadway classification and project operating requirements.
100W LED Roadway Lighting Platform
The Alexandria reference uses a 100W LED Roadway Light designed for outdoor roadway applications.
The product configuration includes:
Lumileds SMD2835 LED
120 lm/W luminous efficiency
5000K ± 500K CCT
Ra 80
Aluminum alloy housing
IP65 protection
10KV surge protection
1.5KV voltage resistance
30,000-hour rated lifespan
220V AC input
50Hz frequency
-20°C to +55°C operating temperature
The configuration provides a practical platform for municipal and urban roadway lighting applications.
Smart Lighting Engineering Services
Smart roadway lighting requires engineering coordination between the roadway, electrical system, luminaires and control strategy.
LIKELITE provides the following engineering services.
Lighting & Circuitry Design
Lighting and circuitry design considers the roadway layout, pole arrangement, fixture position, electrical connection and control requirements.
The objective is to ensure that the lighting system is not designed independently from the electrical infrastructure.
Onsite Metering
On-site lighting measurement can be performed to establish existing illumination conditions.
The measured data can be used as a reference for:
Existing lighting evaluation
LED replacement design
Lighting simulation
Post-installation verification
DIALux Evo Layout
DIALux evo can be used to simulate roadway lighting layouts before installation.
The calculation process can evaluate the proposed luminaire arrangement and provide engineering documentation for project review.
Litepro DLX Layout
Litepro DLX layout support is available for projects using this platform in their lighting engineering workflow.
AutoCAD Layout
AutoCAD layouts can be prepared for:
Roadway geometry
Pole locations
Luminaire positions
Lighting arrangement
Electrical routing
AGi32 Layout
AGi32 calculation and layout support is available for engineering projects requiring AGi32-based lighting analysis.
Project Installation
LIKELITE can support project installation according to the agreed project scope.
Installation support can include:
Luminaire mounting
Electrical connection
Smart control integration
System configuration
Functional testing
Commissioning support
Smart Roadway Lighting Design Process
Step 1 — Site & Roadway Assessment
Review the roadway geometry, road width, pole height, pole spacing, existing luminaires and electrical conditions.
Step 2 — Existing Lighting Measurement
Conduct onsite metering where required to establish the existing lighting condition.
Step 3 — Lighting Requirement Definition
Determine the required lighting performance based on roadway classification, traffic conditions and applicable project standards.
Step 4 — LED Luminaire Selection
Select the appropriate LED Roadway Light based on wattage, optical distribution, mounting height, pole spacing and calculated lighting requirements.
Step 5 — Smart Control Configuration
Determine the appropriate combination of:
Microwave Motion Sensor + Light Control + Timer Control
Step 6 — Lighting Simulation
Develop the lighting layout using DIALux evo, Litepro DLX or AGi32 according to project requirements.
Step 7 — Electrical & Circuitry Design
Integrate the lighting system with the project's electrical infrastructure.
Step 8 — Installation
Install the LED roadway lighting system and smart control equipment according to the approved design.
Step 9 — Testing & Commissioning
Verify luminaire operation, control functions and scheduled operation after installation.
Why Smart Lighting for Urban Roads?
Lower Energy Consumption
Smart control can reduce unnecessary lighting operation by considering traffic movement, ambient light and operating schedules.
The Alexandria reference reported approximately 30% energy savings.
Actual energy performance depends on the existing lighting system, operating hours, traffic profile and final control strategy.
Better Operational Control
A smart roadway lighting system provides greater control flexibility than conventional fixed-output lighting.
Municipal operators can define operating schedules and control behavior according to actual roadway requirements.
Reduced Unnecessary Operation
Motion detection and ambient light control can help reduce lighting operation during low-demand or daylight periods.
Better Engineering Visibility
Combining onsite metering, lighting simulation and electrical design creates a clearer technical basis for the project.
Suitable for Large-Scale Roadway Upgrades
A standardized LED + smart control architecture can be applied across multiple roadway sections and municipal infrastructure projects.
Applications
LIKELITE Smart Lighting Solutions can be applied to:
Urban Roads
Municipal Streets
Arterial Roads
Collector Roads
Residential Roads
Intersections
Pedestrian Roads
Industrial Roads
Public Infrastructure
Commercial Areas
Parking Areas
Campus Roads
Roadway Extensions
Municipal Energy-Saving Projects
Designed for Professional Project Buyers
Municipalities
For urban roadway renovation, municipal energy-saving programs and public infrastructure upgrades.
EPC Contractors
For EPC contractors requiring a combination of LED products, lighting design, simulation, technical documentation and installation support.
Electrical Contractors
For electrical contractors integrating roadway lighting and smart control systems into infrastructure projects.
Engineering Companies
For engineering companies requiring DIALux evo, Litepro DLX, AutoCAD or AGi32 lighting design support.
Lighting Distributors
For distributors supplying LED roadway lighting products for municipal and infrastructure projects.
Lighting Brands
For lighting brands requiring OEM/ODM roadway lighting products and customized smart control configurations.
LIKELITE Smart Lighting Capability
LIKELITE is an outdoor LED lighting manufacturer and engineering project solution provider based in Guangdong, China.
Our capability combines:
Manufacturing + Lighting Engineering + Smart Control + Project Support
Outdoor LED Lighting Products
LED Roadway Lights
Solar Street Lights
LED High Bay Lights
LED Wall Pack Lights
Solar Garden Lights
Engineering Services
Lighting & Circuitry Design
Onsite Metering
DIALux Evo Layout
Litepro DLX Layout
AutoCAD Layout
AGi32 Layout
Project Installation
Project Supply
LIKELITE supports:
Bulk Project Orders + OEM/ODM + Engineering Projects + Customized Outdoor LED Lighting
Technical Specification
| Parameter | Specification |
|---|---|
| Product | LED Roadway Lights |
| Rated Power | 100W |
| Input Voltage | 220V AC |
| Frequency | 50Hz |
| Certification | EOS |
| IP Rating | IP65 |
| Surge | 10KV |
| Voltage Resistance | 1.5KV |
| LED Source | Lumileds SMD2835 |
| Luminous Efficiency | 120 lm/W |
| CCT | 5000K ± 500K |
| CRI | Ra 80 |
| Housing | Aluminum Alloy |
| Lifespan | 30,000 Hours |
| Power Supply | AC |
| Working Temperature | -20°C to +55°C |
| Warranty | 2 Years |
| Brand | LIKELITE |
| Origin | Guangdong, China |
FAQ
1. What is a Smart Roadway Lighting Solution?
It is a roadway lighting system combining LED luminaires with intelligent control functions such as motion sensing, ambient light control and timer control.
2. What smart control system is used in the Alexandria reference?
The reference configuration uses Microwave Motion Sensor + Light Control + Timer Control.
3. What LED roadway light is used in the reference?
The reference uses a 100W LED Roadway Light with Lumileds SMD2835 LED technology.
4. How many lights were included in the Alexandria reference?
The reference includes 2,500 sets of LED Roadway Lights.
5. What energy-saving improvement was reported?
The reference project reported approximately 30% energy savings.
6. Is the roadway light EOS certified?
Yes. The specified product configuration includes EOS certification.
7. What is the IP rating?
The product is specified with IP65 protection.
8. Does the product provide surge protection?
Yes. The specified product provides 10KV surge protection.
9. What is the luminous efficiency?
The specified luminous efficiency is 120 lm/W.
10. Can LIKELITE provide DIALux evo calculations?
Yes. LIKELITE provides DIALux evo layout and lighting calculation support.
11. Can LIKELITE provide onsite lighting measurement?
Yes. Onsite Metering can be included according to project requirements.
12. Can LIKELITE provide electrical and circuitry design?
Yes. Lighting and circuitry design is part of the available engineering service.
13. Can the smart control system be customized?
Yes. The control strategy can be configured according to roadway conditions, lighting requirements, schedules and project specifications.
14. What is the warranty period?
The reference product configuration provides a 2-year warranty.
15. Can LIKELITE support project installation?
Yes. Project installation support can be provided according to the agreed project scope and site conditions.
Request a Smart Roadway Lighting Solution
Planning a municipal or urban roadway lighting upgrade?
Send LIKELITE:
Roadway drawings
Road width
Pole height
Pole spacing
Existing luminaire information
Project quantity
Lighting requirements
Control requirements
Project location
LIKELITE can develop a project-specific combination of:
LED Roadway Lights + Smart Control + Lighting Design + Simulation + Electrical Design + Installation Support
LIKELITE
Outdoor LED Lighting Manufacturer & Engineering Project Solution Provider
