LIKELITE provides integrated smart lighting solutions for urban roads, municipal infrastructure, highways, and large-scale roadway lighting upgrades.
Our approach combines LED street lighting, intelligent lighting controls, lighting design, on-site measurement, photometric simulation, roadway layout, and project installation support into one engineering-oriented solution.
For urban road modernization projects, the objective is not simply to replace conventional lamps with LED fixtures. The lighting system must deliver the required illumination, reduce energy consumption, support intelligent control, operate reliably in outdoor environments, and remain practical for large-scale project deployment.
LIKELITE supports EPC contractors, municipal project buyers, engineering companies, lighting brands, and bulk project procurement teams from lighting design through project implementation.
Smart Lighting Solution Scope
A smart urban roadway lighting system normally involves several interconnected engineering elements:
LED street lighting fixtures
Microwave motion sensing
Automatic light control
Timer-based lighting control
Roadway lighting design
On-site lighting measurement
Photometric simulation
CAD roadway layout
Lighting calculation
Installation support
Project-specific configuration
Energy-saving optimization
The solution can be configured according to road classification, traffic conditions, operating schedules, environmental requirements, existing electrical infrastructure, and project specifications.
Intelligent Control for Urban Roadways
Urban roads rarely require the same lighting output throughout the entire night.
Traffic volume can vary considerably between peak hours, late-night periods, weekends, and different road sections. A fixed-output lighting system may therefore consume more electricity than necessary.
LIKELITE smart lighting solutions can combine:
Microwave Motion Sensor + Light Control + Timer Control
This allows the lighting system to respond to different operating conditions while maintaining appropriate roadway visibility.
The control strategy can be configured around:
Traffic activity
Time periods
Ambient light conditions
Road usage
Lighting schedules
Required illumination levels
The objective is to provide the required lighting performance while reducing unnecessary operating hours and power consumption.
Energy-Efficient LED Street Lighting
For large municipal and roadway projects, energy efficiency is directly connected to long-term operating costs.
The referenced Miskolc urban roadway upgrade in Hungary used 100W LED Street Lights with a stated energy-saving improvement of approximately 20%.
The project specification included:
100W LED Street Lights
140 lm/W lamp luminous efficiency
Lumileds SMD2835 LED
5000K ±300K
CRI Ra80
IP66 protection
10KV surge protection
AC 100–240V input
Microwave motion sensor
Light control
Timer control
For project buyers, the key consideration is not simply fixture wattage. System-level energy performance depends on lighting design, operating schedules, control logic, roadway conditions, and the relationship between installed power and required illumination.
Engineering-Based Lighting Design
LIKELITE provides engineering support before equipment deployment.
Our lighting design service can include:
On-site metering
Roadway data collection
Lighting and circuitry design
DIALux Evo layout
LitePro DLX layout
AutoCAD layout
AGi32 layout
Lighting performance analysis
Project installation support
These engineering services help project teams evaluate the proposed lighting configuration before large-scale installation.
For roadway projects, simulation can be used to assess lighting distribution, fixture spacing, mounting configuration, illumination performance, and project-specific design requirements.
Photometric Simulation & Roadway Layout
Lighting calculations are an important part of professional roadway lighting projects.
LIKELITE can develop project layouts using professional lighting design and engineering software, including:
DIALux Evo
Used for roadway lighting calculations, lighting distribution analysis, and project layout development.
LitePro DLX
Used for lighting design and photometric evaluation according to project requirements.
AutoCAD
Used to prepare engineering layouts, roadway plans, fixture positions, and project documentation.
AGi32
Used for advanced lighting calculations and illumination analysis.
The exact software and calculation method can be selected according to the project specification and engineering team's requirements.
Smart Lighting System Architecture
A typical smart roadway lighting solution can be structured into several layers:
1. LED Lighting Layer
High-efficiency LED Street Lights provide the primary roadway illumination.
2. Detection Layer
Microwave motion sensors can detect changes in movement and traffic activity.
3. Environmental Control Layer
Light control can respond to ambient lighting conditions.
4. Time Management Layer
Timer control allows the operating schedule to be configured according to project requirements.
5. Engineering Design Layer
Lighting calculations and roadway layouts establish the appropriate fixture configuration.
6. Installation Layer
Project installation support helps transfer the approved design into field implementation.
This layered approach allows the lighting system to be adapted to different urban roadway conditions rather than relying on a single fixed operating mode.
Miskolc, Hungary — Smart Urban Roadway Lighting Upgrade Reference
A smart urban roadway lighting upgrade in Miskolc, Hungary demonstrates the application of the solution in a large-scale municipal roadway environment.
Project Reference
| Item | Specification |
|---|---|
| Location | Miskolc, Hungary |
| Application | Urban Roadway Lighting Upgrade |
| Product | LED Street Lights |
| Quantity | 7,000 sets |
| Rated Power | 100W |
| Luminous Efficiency | 140 lm/W |
| Protection | IP66 |
| Surge Protection | 10KV |
| Input Voltage | AC 100–240V |
| LED | Lumileds SMD2835 |
| CCT | 5000K ±300K |
| CRI | Ra80 |
| Control | Microwave Motion Sensor + Light Control + Timer Control |
| Energy Saving | Approximately 20% |
| Certification | CE |
| Warranty | 2 Years |
| Operating Temperature | -20°C to +55°C |
| Service | Design, Simulation, Layout & Installation Support |
The project involved 7,000 sets of 100W LED street lights and integrated intelligent control functions.
The combination of LED efficiency and intelligent control was designed to improve energy performance while supporting the operational requirements of urban roadway lighting.
Product Engineering Specification
The LED street light configuration used in the reference solution includes:
Input Voltage: AC 100–240V
Frequency: 50Hz
Rated Power: 100W
Lamp Efficiency: 140 lm/W
Light Source: Lumileds SMD2835 LED
Color Temperature: 5000K ±300K
Color Rendering Index: Ra80
IP Rating: IP66
Surge Protection: 10KV
Voltage Resistance: 1.5KV
Body Material: Aluminum Alloy
Power Supply: AC
Lifespan: 30,000 hours
Working Temperature: -20°C to +55°C
Certification: CE
Warranty: 2 Years
These specifications provide a technical reference for project evaluation. Final product configuration should be confirmed according to the road classification, local standards, environmental conditions, electrical system, and project tender requirements.
Why Smart Lighting Requires More Than Smart Fixtures
A smart street light is only one component of a smart roadway lighting system.
A successful project also depends on:
Correct lighting calculations
Appropriate fixture positioning
Suitable optical distribution
Proper mounting height
Road width and geometry
Pole spacing
Traffic conditions
Control strategy
Electrical infrastructure
Installation quality
Commissioning
This is why LIKELITE approaches smart lighting projects from an engineering solution perspective rather than treating them as simple product procurement.
Solution for Municipal Roadway Modernization
Smart lighting can be applied to different urban infrastructure scenarios, including:
City roads
Main urban avenues
Residential roads
Industrial roads
Municipal road networks
Urban intersections
Public infrastructure
Roadway renovation projects
Existing lighting replacement programs
For retrofit projects, the existing lighting system can be evaluated before determining the new LED fixture configuration and control strategy.
Solution for EPC Contractors
For EPC contractors, lighting procurement often requires more than product supply.
LIKELITE can support project teams with:
Project Input → On-Site Measurement → Lighting Design → Photometric Simulation → Product Configuration → Engineering Layout → Production → Installation Support
This workflow allows the lighting system to be evaluated as part of the complete project rather than as an isolated fixture purchase.
Solution for Municipal & Infrastructure Buyers
Municipal and infrastructure buyers can use the solution approach to evaluate:
Energy-saving potential
Lighting performance
Fixture reliability
Intelligent control capability
Project-scale supply capacity
Technical documentation
Installation requirements
Long-term maintenance considerations
The final configuration can be adapted to project specifications, local regulations, road conditions, and procurement requirements.
Solution for Lighting Brands & ODM Buyers
Lighting brands requiring customized smart roadway lighting products can work with LIKELITE on project-specific configurations.
Potential customization areas include:
Fixture power
LED configuration
Optical distribution
Housing
Control components
Sensor integration
Driver configuration
Electrical specifications
Labeling
Packaging
Project documentation
This makes the solution suitable for both engineering procurement and long-term OEM/ODM cooperation.
Project Delivery Support
LIKELITE can support international roadway lighting projects through multiple stages:
01 — Project Requirement
Review road type, lighting objectives, quantities, technical specifications, and control requirements.
02 — Site Information
Collect available roadway dimensions, pole information, existing lighting data, and electrical conditions.
03 — Lighting Design
Develop the proposed lighting and circuitry design.
04 — Photometric Calculation
Prepare DIALux Evo, LitePro DLX, AutoCAD, or AGi32 layouts as required.
05 — Product Configuration
Match LED street light specifications with the project design.
06 — Production & Quality Control
Manufacture and inspect the approved lighting configuration.
07 — Project Installation
Provide project installation support according to the agreed scope.
Built for Large-Scale Roadway Projects
The Miskolc reference project demonstrates the applicability of this solution approach at a scale of 7,000 LED street lights.
For large roadway projects, LIKELITE focuses on four key factors:
Lighting Performance
The lighting system should meet the required roadway lighting objectives.
Energy Performance
LED efficiency and intelligent control can reduce unnecessary energy consumption.
Engineering Compatibility
The lighting solution must work with the actual roadway, electrical, and installation conditions.
Project Execution
Product supply, documentation, layout, and installation support need to work together.
Smart Lighting Solutions by LIKELITE
LIKELITE is a China-based outdoor LED lighting engineering project solution provider supporting international customers since 2017.
Our smart lighting solutions combine LED street lighting products with engineering design, photometric simulation, intelligent control integration, project documentation, and installation support.
For EPC contractors, municipal buyers, engineering companies, lighting brands, and bulk project procurement teams, the objective is simple:
A lighting solution designed around the project — not simply a lighting product selected for the project.
Request a Smart Lighting Project Evaluation
If you are planning an urban roadway lighting upgrade, municipal lighting replacement, or large-scale smart street lighting project, LIKELITE can evaluate the project requirements and develop a suitable lighting solution.
Please provide the available project information, such as:
Road type
Road dimensions
Existing pole height
Pole spacing
Required lighting level
Project quantity
Control requirements
Local electrical standards
Project location
LIKELITE can then develop the appropriate lighting configuration, engineering layout, and project supply proposal.
FAQ
1. What is a smart lighting solution for urban roads?
A smart urban roadway lighting solution combines LED street lights with intelligent control, lighting design, sensors, operating schedules, and engineering implementation.
2. What intelligent controls can LIKELITE provide?
The reference solution uses microwave motion sensing, light control, and timer control. The final control configuration can be adapted to project requirements.
3. How much energy can smart roadway lighting save?
Energy savings depend on the existing lighting system, LED efficiency, operating schedule, traffic conditions, control strategy, and lighting design. The Miskolc reference project achieved a stated improvement of approximately 20%.
4. Can LIKELITE provide DIALux lighting calculations?
Yes. LIKELITE provides DIALux Evo layout services together with other engineering layout options.
5. Does LIKELITE support existing street light retrofit projects?
Yes. Existing roadway conditions can be evaluated before determining the replacement fixture and control configuration.
6. What LED street light efficiency is available in this solution?
The Miskolc reference configuration specifies 140 lm/W lamp luminous efficiency.
7. What IP protection does the reference street light use?
The reference configuration uses IP66 protection.
8. What surge protection is specified?
The reference configuration specifies 10KV surge protection.
9. Can the smart lighting system operate automatically?
Yes. The combination of motion sensing, light control, and timer control can support automated operation according to the configured control strategy.
10. Can LIKELITE support large quantities?
Yes. The Miskolc reference project involved 7,000 sets of LED street lights.
11. Can LIKELITE provide installation support?
Project installation is included among the available lighting solution services, subject to the agreed project scope.
12. Is the solution suitable for EPC contractors?
Yes. The solution is designed to support EPC contractors with design, simulation, product configuration, documentation, supply, and installation support.
13. Can LIKELITE provide OEM or ODM smart lighting solutions?
Yes. Smart street lighting products can be configured for project-specific OEM/ODM requirements.
14. Where are LIKELITE smart lighting products manufactured?
The reference products are manufactured in Guangdong, China.
15. What warranty is provided for the Miskolc reference configuration?
The stated warranty for the reference configuration is 2 years.
Primary Solution: Smart Urban Road Lighting
Product: LED Street Lights
Application: Municipal & Urban Roadway Infrastructure
Control: Microwave Motion Sensor + Light Control + Timer Control
Engineering Services: Lighting Design · On-Site Metering · DIALux Evo · LitePro DLX · AutoCAD · AGi32 · Project Installation
Project Reference: Miskolc, Hungary · 7,000 Sets · 100W · Approx. 20% Energy-Saving Improvement
