High-Efficiency Solar LED Roadway Lighting with Remote Control, Smart Dimming and Integrated Energy Management
LIKELITE provides solar lighting solutions for roadway, municipal, infrastructure, public-space and outdoor lighting applications where reliable illumination and reduced grid dependence are required.
The solution combines solar-powered LED roadway luminaires, mono-silicon solar panels, lithium battery storage, remote control and intelligent lighting management into a project-oriented lighting system.
A representative configuration for European roadway applications is based on a 130W LED Solar Roadway Light, with up to 160 lm/W luminous efficiency, IP66 protection, CREE SMD3030 LEDs and remote-controlled dimming.
The system can also integrate:
Microwave Motion Sensor + Light Control + Timer Control
allowing lighting output and operating schedules to be adjusted according to roadway conditions and project requirements.
Solar Roadway Lighting Solution Overview
Solar roadway lighting is designed for applications where lighting performance, energy independence and installation flexibility need to be considered together.
A complete LIKELITE solar lighting configuration can include:
LED Solar Roadway Lights
Mono-Si solar panels
Battery energy storage
Remote control
Dimming function
Microwave motion sensing
Light control
Timer control
Lighting and circuitry design
Onsite metering
DIALux Evo simulation
Litepro DLX layout
AutoCAD layout
AGi32 layout
The system can be configured according to road geometry, required illumination levels, operating hours, solar conditions, battery capacity and local project requirements.
Solar Lighting System Architecture
A typical LIKELITE solar roadway lighting system consists of four primary components.
Solar Energy Generation
Mono-Si solar panels convert sunlight into electrical energy during the daytime.
Energy Storage
The battery stores generated energy and supplies power to the LED lighting system during nighttime operation.
LED Roadway Lighting
High-efficiency LED technology provides roadway illumination while reducing the power requirement compared with conventional lighting systems.
Intelligent Control
Remote control, dimming, microwave motion sensing, light control and timer control can be configured according to the project.
The complete system therefore operates as:
Solar Generation → Battery Storage → Intelligent Control → LED Roadway Lighting
LED Solar Roadway Light Configuration
The 130W configuration is designed for roadway and outdoor infrastructure applications where high luminous efficiency and independent solar power are required.
| Parameter | Configuration |
|---|---|
| Product | LED Solar Roadway Lights |
| Brand | LIKELITE |
| Rated Power | 130W |
| Luminous Efficiency | 160 lm/W |
| LED Source | CREE SMD3030 |
| Solar Cell | Mono-Si |
| Power Supply | Solar |
| IP Rating | IP66 |
| Input Voltage | 220–240V AC |
| System Voltage | 12.8V–25.6V |
| Work Voltage | Up to 25V / 180W configuration |
| CCT | 5000K ±300K |
| CRI | Ra 70 |
| Beam Angle | 75° / 140° Cut Out |
| Housing | Aluminum Alloy |
| Shade | Glass |
| Remote Control | Supported |
| Dimming | Supported |
| Working Temperature | -25°C to +65°C |
| Control System | Microwave Motion Sensor + Light Control + Timer Control |
| Warranty | 2 Years |
| Origin | Guangdong, China |
Solar Panel and Battery Configuration
Solar lighting performance depends on matching solar generation and battery storage to the required lighting load.
For the project configuration represented by this solution, the solar panel range is:
18V 36W – 36V 130W
The battery configuration can range from:
12.8V 15Ah – 25.6V 90Ah
The final combination should be determined according to:
Daily operating hours
Local solar radiation
Seasonal weather conditions
Required autonomy
LED power
Dimming strategy
Road classification
Installation location
Battery charging conditions
The stated charging time is approximately 5–6 hours, subject to solar conditions and system configuration.
Intelligent Solar Lighting Control
Solar roadway lighting does not have to operate at one fixed output throughout the night.
LIKELITE systems can combine several control functions.
Remote Control
Remote control enables lighting operation and system parameters to be managed without requiring manual adjustment at each luminaire.
This is useful for distributed roadway lighting installations and municipal infrastructure.
Dimming
The system supports dimming.
Lighting output can be adjusted according to programmed operating schedules or project-specific control requirements.
Microwave Motion Sensor
Microwave motion sensing can detect movement around the roadway and support adaptive lighting operation.
During periods of low activity, the system can operate at a reduced lighting level. When movement is detected, the lighting level can be increased according to the configured control strategy.
Light Control
Light control enables automatic operation according to ambient light conditions.
Timer Control
Timer control allows predefined operating schedules to be programmed into the lighting system.
The three functions can be combined:
Motion Detection + Light Control + Timer Control
Solar Roadway Lighting Engineering Design
A solar lighting system should be designed around the actual application rather than selected only by LED wattage.
LIKELITE can support the engineering process through:
Onsite Metering
↓
Roadway Data Collection
↓
Lighting & Circuitry Design
↓
DIALux Evo Layout
↓
Litepro DLX Layout
↓
AutoCAD Layout
↓
AGi32 Layout
↓
Solar & Battery Configuration
↓
Smart Control Configuration
This approach allows roadway geometry, lighting distribution, energy generation and storage capacity to be considered together.
Lighting Simulation and Layout
Professional lighting simulation is used to evaluate the proposed lighting configuration before project implementation.
LIKELITE supports:
DIALux Evo
Litepro DLX
AutoCAD
AGi32
The design process can evaluate factors such as:
Road width
Pole spacing
Mounting height
Luminaire position
Beam distribution
Lighting uniformity
Required illumination
Energy consumption
Solar system configuration
The final luminaire power and solar-storage configuration should be confirmed through project-specific calculations.
Energy-Saving Strategy
A solar roadway lighting system reduces dependence on conventional grid electricity by generating and storing solar energy locally.
The energy-saving strategy combines:
Solar Power Generation
High-Efficiency LED
Intelligent Dimming
Motion Detection
Light Control
Timer Control
The 130W configuration provides a stated luminous efficiency of 160 lm/W, while intelligent controls can reduce unnecessary lighting operation during low-traffic periods.
A representative roadway application based on this configuration achieved a reported 25% energy-saving improvement.
Actual energy performance will vary according to solar conditions, operating schedules, traffic patterns, lighting requirements and system configuration.
Outdoor Protection and Environmental Performance
Solar roadway lighting is installed in exposed outdoor environments and therefore requires appropriate environmental protection.
The specified configuration provides:
IP66 protection
for protection against dust ingress and water exposure under the applicable test conditions.
The specified operating temperature is:
-25°C to +65°C
The luminaire housing uses aluminum alloy, while the shade uses glass.
These characteristics make the configuration suitable for outdoor roadway and infrastructure applications where temperature variation and environmental exposure need to be considered.
Certifications and Project Documentation
For international solar lighting Projects, product documentation and compliance requirements should be defined before procurement.
The specified configuration supports:
CE
DoC
RoHS
UN38.3
MSDS
These documents are particularly relevant for international procurement and Projects involving solar panels, battery systems and electrical equipment.
Final certification and documentation requirements should be confirmed according to the destination country and project specification.
Solar Lighting Applications
LIKELITE solar lighting solutions can be configured for a range of outdoor applications:
Urban roads
Rural roads
Municipal streets
Residential roads
Highways and access roads
Industrial parks
Parking areas
Public spaces
Campus roads
Resort roads
Remote infrastructure
Off-grid locations
Smart city infrastructure
Solar lighting can be particularly suitable where grid extension is difficult, expensive or undesirable.
Why Use a Solar Lighting Solution?
A project-based solar lighting system can provide several practical advantages.
Reduced Grid Dependence
Solar energy is generated locally and stored for nighttime operation.
Flexible Installation
The system can be used in locations where grid infrastructure is limited.
Intelligent Operation
Remote control, dimming, motion sensing and timer control can optimize operating schedules.
High-Efficiency Lighting
The specified configuration provides up to 160 lm/W luminous efficiency.
Outdoor Protection
IP66 protection and an aluminum-alloy housing are suitable for outdoor roadway applications.
Engineering Support
Lighting design and simulation can be incorporated into the project development process.
International Solar Lighting Project Support
LIKELITE provides project-oriented support for international buyers, EPC contractors, engineering companies and municipal infrastructure Projects.
Available services include:
Lighting & Circuitry Design
Onsite Metering
DIALux Evo Layout
Litepro DLX Layout
AutoCAD Layout
AGi32 Layout
Solar System Configuration
Battery Configuration
Smart Control Configuration
Product Supply
Project Technical Support
The objective is to provide a solar roadway lighting system that is matched to the actual project rather than supplying a standard luminaire without engineering consideration.
Typical Solar Lighting Solution Configuration
| System Component | Typical Configuration |
|---|---|
| LED Luminaire | 130W LED Solar Roadway Light |
| LED Source | CREE SMD3030 |
| Efficiency | 160 lm/W |
| Solar Panel | Mono-Si |
| Panel Range | 18V 36W–36V 130W |
| Battery | 12.8V 15Ah–25.6V 90Ah |
| Charging Time | Approx. 5–6 Hours |
| Control | Remote Control |
| Dimming | Supported |
| Smart Control | Microwave Motion Sensor + Light Control + Timer |
| Protection | IP66 |
| CCT | 5000K ±300K |
| CRI | Ra 70 |
| Operating Temperature | -25°C to +65°C |
| Warranty | 2 Years |
Who Is This Solution For?
EPC Contractors
For roadway and infrastructure projects requiring solar lighting equipment and engineering support.
Municipal Authorities
For street lighting upgrades, energy-saving programs and public infrastructure.
Engineering Companies
For projects requiring lighting simulation, electrical layouts and solar system configuration.
Infrastructure Developers
For roads, industrial parks, campuses and remote infrastructure.
Lighting Distributors
For bulk procurement of solar roadway lighting systems.
Frequently Asked Questions
1. What is a solar roadway lighting solution?
It is an integrated lighting system combining solar power generation, battery storage, LED roadway lighting and intelligent control.
2. What LED source is used in the 130W configuration?
The specified configuration uses CREE SMD3030 LED.
3. What is the luminous efficiency?
The specified luminous efficiency is 160 lm/W.
4. What type of solar panel is used?
The system uses Mono-Si solar cells.
5. What solar panel range is available?
The specified range is 18V 36W–36V 130W.
6. What battery configurations are available?
The specified range is 12.8V 15Ah–25.6V 90Ah.
7. Does the system support remote control?
Yes. The configuration supports Remote Control.
8. Does the solar roadway light support dimming?
Yes. Dimming is supported.
9. Can motion sensing be integrated?
Yes. Microwave motion sensing can be integrated with light and timer control.
10. What is the IP rating?
The specified luminaire provides IP66 protection.
11. What is the operating temperature?
The specified working temperature is -25°C to +65°C.
12. What engineering design services does LIKELITE provide?
LIKELITE supports Lighting & Circuitry Design, Onsite Metering, DIALux Evo, Litepro DLX, AutoCAD and AGi32 layouts.
13. What certifications and documents are available?
The specified configuration includes CE, DoC, RoHS, UN38.3 and MSDS documentation requirements.
14. What is the warranty?
The specified warranty period is 2 years.
15. Can the solar lighting system be customized?
Yes. Solar panel capacity, battery capacity, LED power, control strategy and lighting design can be configured according to project requirements.
Request a Solar Lighting Solution
Planning a solar roadway, municipal street lighting or off-grid infrastructure project?
LIKELITE can support the project with solar LED roadway lighting, lighting simulation, solar-storage configuration, intelligent control and project engineering services.
Product: LED Solar Roadway Lights
Power: Up to 130W configuration
Efficiency: Up to 160 lm/W
Control: Remote + Dimming + Motion + Light + Timer
Engineering: DIALux Evo + Litepro DLX + AutoCAD + AGi32
Submit your project requirements to LIKELITE for a project-specific solar lighting configuration.
