Turkey Antalya Municipal Road Lighting Upgrade/80W Smart LED Street Lighting Project | 6,000 Sets

Project Location: Antalya, Turkey
Project Type: Municipal Road Lighting Upgrade
Lighting Application: Urban Roads / Municipal Streets
Product: LED Street Lights
Power: 80W
Quantity: 6,000 sets
Certification: CE / TSE
Warranty: 2 Years
Energy-Saving Improvement: 22%
Brand: LIKELITE
Origin: Guangdong, China

Project Overview

The Antalya Municipal Road Lighting Upgrade was developed to replace or upgrade existing municipal road lighting with a more efficient LED street lighting system.

The project supplied 6,000 units of 80W LIKELITE LED Street Lights for municipal road applications.

The lighting configuration combines high-efficiency LED technology with a three-function smart control system:

Microwave Motion Sensor + Light Control + Timer Control

The project configuration was designed around municipal requirements for road visibility, operating efficiency, electrical protection, automatic lighting control and long-term outdoor operation.

The reported energy-saving improvement for the project was 22%.

Project Scope

Municipal Road Lighting Requirements

For a municipal road lighting upgrade, the lighting system needs to operate consistently across different road sections, traffic conditions and operating periods.

The Antalya project configuration addressed the following engineering requirements:

• Replacement of conventional or less-efficient road lighting

• Improvement of lighting energy efficiency

• Automatic lighting operation

• Motion-based lighting response

• Daylight-based lighting control

• Time-based operating control

• Outdoor electrical protection

• Municipal road lighting uniformity

• Long-term outdoor operation

• Simplified maintenance requirements

The project therefore combined the LED luminaire, electrical protection and automatic control functions rather than treating the street light as an isolated product.

80W LED Street Light Configuration

The project used an 80W LED Street Light based on Lumileds SMD2835 LED technology.

Optical Configuration

• LED: Lumileds SMD2835

• Luminous efficiency: 130 lm/W

• Beam angle: 120°

• CCT: 5000K ±500K

• CRI: Ra80

The optical configuration was selected for municipal roadway applications where road surface visibility and practical illumination coverage are key design considerations.

Final pole spacing, mounting height, road width, setback and lighting distribution should be verified through project-specific lighting calculations.

Smart Municipal Lighting Control

A major component of the Antalya project was the integrated control configuration:

Microwave Motion Sensor

The microwave motion sensor enables the lighting system to respond to movement in the monitored area.

This can support reduced operating power during periods of lower activity while allowing lighting output to respond when movement is detected.

Light Control

The light-control function enables the system to respond to ambient daylight conditions.

This helps prevent unnecessary operation during periods when sufficient natural light is available.

Timer Control

Timer control allows the operating schedule to be configured according to municipal requirements.

The three functions can be combined to create a practical operating strategy for different road-use periods.

Control configuration:
Motion Detection + Ambient Light Detection + Time Scheduling

Outdoor Protection

The Antalya project specification includes:

IP66 + 10KV Surge Protection + 1.5KV Voltage Resistance

These specifications are intended to support reliable operation in outdoor municipal environments.

The aluminum alloy lamp body provides the mechanical housing for the LED and electrical components.

Environmental Operating Range

-20°C to +45°C

This specification should be considered together with the actual installation environment, thermal conditions, pole configuration and electrical system.

Municipal Lighting Engineering Services

The project was supported by LIKELITE lighting engineering services covering design, measurement, simulation and installation.

01 — Lighting and Circuitry Design

Project-specific lighting and electrical requirements can be developed according to:

• Road geometry

• Pole position

• Pole height

• Road width

• Existing electrical infrastructure

• Required lighting performance

• Control requirements

02 — Onsite Metering

Existing road conditions can be measured before final lighting configuration.

Typical project data includes:

• Road dimensions

• Existing pole spacing

• Pole height

• Pole position

• Existing lighting performance

• Electrical conditions

• Installation constraints

03 — DIALux Evo Layout

DIALux Evo can be used to model the road layout and evaluate the proposed LED street lighting arrangement.

Typical calculation parameters include:

• Illuminance

• Uniformity

• Luminaire arrangement

• Mounting height

• Pole spacing

• Lighting distribution

Actual DIALux calculation results should be published only when the project calculation file or report is available.

04 — LitePro DLX Layout

LitePro DLX can be used for additional lighting layout and optical evaluation where applicable.

05 — AutoCAD Layout

AutoCAD drawings can be used for:

• Pole layouts

• Road lighting layouts

• Cable/circuit planning

• Equipment positioning

• Engineering documentation

06 — AGi32 Layout

AGi32 can be used as an additional lighting calculation platform when required by the engineering team or project specification.

07 — Project Installation

Project installation support can include:

• Luminaire installation

• Pole connection

• Electrical connection

• Control-system installation

• Functional testing

• Lighting commissioning

Project Result

The Antalya municipal road lighting project reported a:

22% Energy-Saving Improvement

The improvement should be understood as a project-specific result, dependent on the original lighting system, operating schedule, control strategy, installed power and actual road operating conditions.

It should not be presented as a universal saving guarantee for every municipal road project.

Before & After Comparison

DIALux EVO Lighting Simulation Verification

Project Product Specification

Project Supply Information

Supplier: LIKELITE
Product Category: Outdoor LED Lighting
Manufacturing Origin: Guangdong, China
Project Quantity: 6,000 sets
Application: Municipal Road Lighting
Project Year: [Add verified year]
Customer / EPC: [Publish only with permission]

FAQ — Antalya Municipal Road Lighting Project

1. Where is the LIKELITE municipal lighting project located?

The project is identified as a municipal road lighting upgrade in Antalya, Turkey.

2. How many LED street lights were supplied?

The project specification lists 6,000 sets of LED Street Lights.

3. What LED street light wattage was used?

The project used 80W LED Street Lights.

4. What LED technology was specified?

The luminaire uses Lumileds SMD2835 LED technology.

5. What was the reported energy-saving improvement?

The project reported a 22% energy-saving improvement.

6. Did the project use smart lighting control?

Yes. The specified system combines Microwave Motion Sensor, Light Control and Timer Control.

7. What is the input voltage?

The specified input voltage is AC230V ±10% at 50Hz.

8. What outdoor protection was specified?

The luminaire specification includes IP66, 10KV surge protection and 1.5KV voltage resistance.

9. What certifications were specified?

The project specification lists CE / TSE.

10. What is the LED street light luminous efficiency?

The specified luminous efficiency is 130 lm/W.

11. What is the warranty period?

The project specification includes a 2-year warranty.

12. What lighting design services were available?

The listed services include lighting and circuitry design, onsite metering, DIALux Evo, LitePro DLX, AutoCAD, AGi32 and project installation.

13. Can LIKELITE provide DIALux lighting calculations for another municipal project?

Yes. Project-specific DIALux Evo layouts can be developed based on verified road geometry, pole arrangement, mounting height and required lighting criteria.

14. Can the Antalya project data be used as a guaranteed specification for another city?

No. The Antalya specifications are project-specific. A new municipal project should be evaluated according to its road geometry, electrical conditions, lighting requirements, operating schedule and applicable local standards.

15. Can LIKELITE provide an 80W LED street lighting solution for a new municipal project?

Yes. LIKELITE can support product configuration, lighting design, simulation, electrical layout and project supply according to the requirements of a new municipal road project.

Request a Municipal Road Lighting Project

If you are an EPC contractor, municipal procurement company, lighting distributor, engineering company or project developer, LIKELITE can support the project from product configuration through lighting design and bulk supply.

Project information recommended for quotation:

• Country / City

• Road type

• Road width

• Pole height

• Pole spacing

• Quantity

• Existing luminaire wattage

• Target wattage

• Input voltage

• Lighting standard

• Smart-control requirements

• Required certification

• DIALux requirement

• Installation requirement

LIKELITE

Outdoor LED Lighting Manufacturer & Project Solution Provider

LED Street Lights | Solar Street Lights | LED Flood Lights | LED Highway Lights | LED Stadium Lights | LED High Bay Lights | LED Wall Pack Lights

Request Project Design → Request Quotation → Submit Project Requirements